Today's Posts

As promised Sorry, no finall pics

Bitte

Somebody has to say it. Try the 'Whatsapp' app. 🤣

Not worth its own post, but spent yesterday making up half dozen of these for the local community woodland groups kids - scrap pallets, 3 left over bolts and a handful of screws. Folding saw horses so the kids keep their fingers protected from the saw blades a little.

Speaking as someone who bought a similar £70 top handle just for fencing so i didnt ruin my 020 , you are spot on mick.

Hi guys, What friction cord would you be running on this, maybe cousin armadillo 10mm?

Thanks for that, can’t fault the logic. Have to admit to being negligent as far as checking further, I know I should but it looks pristine in the bottom end. Plus I can’t think of anything in there (brgs, cages) that would provide flat debris like that. I like the screw driver theory ….. right opposite the spark plug hole. Ties in with a DIYer trying a Chinese replacement plug sourced from an online store, cheap as chips. Why am I leaning towards boggery rather than mechanical unreliability ? 🤔🙄

I put this together a few years ago when I ran Avants. Standard PTO 3 point linkage winch, avant 3 point adapter and then a Hydraulic - PTO pump.

Still and quiet today. Started to watch the Netflix thing about Ed Gein. What a sick bloke he was and I wonder how many more there like him who got away with their crimes. Odd jobs etc today.... Bow, Team, Murk, Beatrice.

Good starter for two today Wordle 1,569 2/6* 🟨🟩⬜🟨🟨 🟩🟩🟩🟩🟩

Interesting, thanks.

Theres a plug on the wiring from the paddle switches and stop bar limit switch to the stress control box that can become damp and corrode over time. worth checking and cleaning out. happened mine a few years ago.

I used to stomp around to Venetian Snares in early 2000's.

So were back in business, electrics all sorted and made a few upgrades too. got the little McCulloch sorted, and got a McCuloch Pro Mac 6 and that's now running too. the 350 Husqvarna that I was not particularly impressed with has been rebuilt and I have to say as given some decent reports here has been given a second chance,, I have to say it's a lively little thing, and very light and well balanced. and I picked up an Alpina 70, and there's a Poulan on it's way to me soon. I may have to build more shelves.

any ideas tw230 loads of black smoke wont turn of on key changed pump solenoid no difference thanks all

today's effort

https://www.youtube.com/watch?v=6-ZNJvUiXyk

It should be 3.5mm on the 372. As a very rough guide 50-90cc 261/550 - 462/572 use 3.5mm, 90+ 661/395 use 4mm for Husqvarna and 4.5mm for Stihl. Small top handles and machines with easy start use 2.7/2.8mm, small saws and regular top handles use 3mm. The average length of the cord is 800mm but this can go up to 1000mm for blowers and brush cutters. Its always worth having some 3.5mm cord in the van as this will fit most machines and can sort out the bigger machines for a quick fix although you may not manage to get it to fit through the starter handle or pulley on the smaller machines. Its always worth changing starter cord once a year as if it does go out in the field it can be clips, springs and recoil springs flying in all directions and a lot of cursing. To give it a quick check pull the starter handle out then pull the handle down the cord and check the cord where it goes into the bottom of the handle as that is the most common place for it to wear. If you have the starter cover off check the cord at the point just after the stopper knot in the starter drum. We sell cord by the metre so you dont have to buy 30 feet of cord at a time.

The sections that have narrowed are where they pass through the muscle wall so not suitable to stent. I’m now stuck here for at least another two days while they check the medication is doing it’s job

Cant advice for you, only you know. I know a arbor guy over 70 years old. He is not you, and i doubt my friend would ask for advice if he can or not do it. you either do it or you don't. you wont beat a 20 year old confident guy, your only road is being your own boss. You won't be able to get the experience i have, from starting from age 12, you starting at age 50 or so, the only thing you need to focus on is understanding the tools not killing yourself. First thing i would work on is confidence, and go from there.

Let us know how it goes, refurbishing the carb is always a good idea but don't ignore looking at the condition of the piston as it may have slightly seized causing your issues.

Hi all Just wanted to let guys know running a predator 38 the difference in changing the pulley from 200mm to 225 mm. The difference was remarkable, quicker recovery time when rev goes down, and better torque, had to do some cutting here and there to fit it. but was well worth it. Less bogging down and faster grinding, specially deeper down.

As above. And you’ll have to find somewhere else to put your washing line.