Jump to content

Log in or register to remove this advert

slack ma girdle

Veteran Member
 View Profile  See their activity

  • Posts

    4,037

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by slack ma girdle

  1. slack ma girdle
    I need a beer after that.
  2. slack ma girdle
    Get both and see which you prefer.
  3. slack ma girdle
    Greater than 0º, less than 45º, next question
  4. slack ma girdle
    Here you shavey, just to wet your appetite of what is possible with a logosol: A small lump of beech that i milled today. The lump was too big for the forwarder to pick up, so had to use my farm jack to aid unloading from the trailer and on to the mill.
  5. slack ma girdle
    Try not to snigger too much
  6. slack ma girdle
    It is worth its weight in gold. You will notice less vibration when cutting, as the teeth are more consistanley ground.
  7. slack ma girdle
    Handy for kindling
  8. slack ma girdle
    Well done, have a glass of sherry. HA HA
  9. slack ma girdle
    And this.
  10. slack ma girdle
    This might help.
  11. slack ma girdle
    Nope
  12. slack ma girdle
    P.S. the tractor in the back ground is from another set.
  13. slack ma girdle
    So close stephen
  14. slack ma girdle
    ?????
  15. slack ma girdle
    Codwood
  16. slack ma girdle
    Yep it be one of these beasties
  17. slack ma girdle
    A1 servicing in Narbeth have a 20m one, or is that too small Tim ?
  18. slack ma girdle
    :)
  19. slack ma girdle
    I have never been that impressed with the 261 after running a 026 for ten years. The 261 is already starting to sound like the mighty Nuffield, i can not adjust the carb properly because of the stupid aluminum sleves on the carb screws, and there are a few other niggly things. So i fancied a change. But the major reason is the Echo dealer, who could not be more helpful.
  20. slack ma girdle
    Mine has been brilliant. Most of my milling has been with an 18" bar powered by an 066, so it flys. The measuring gague does not allow for the saw kerf, so for accurate milling i measure with a small steel ruler.
  21. slack ma girdle
    I have decided to sell my 261 and replace it with an echo 450, mostly because of getting hold parts as i have no Stihl dealer within an hour of me.
  22. slack ma girdle
    Put me down for a cockspur thorn as well.
  23. slack ma girdle
    I use 30 amp fuse wire wrapped around the fuse holders, not had a problem since.
  24. slack ma girdle
    Two wheel drive tractor(50-60hp) and a pto winch will set you back £2000, and solve most of your problems.
  25. slack ma girdle
    Good vid, whats the tunes ?

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.