spudulike
-
Posts
14,772 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by spudulike
-
Whindham, not sure how else you would say it....what about Happisburgh!
-
In life there are cocks of various sizes, the shorter cocks are usually the biggest cocks. Some live in big houses and some go round pinching "Village Hall" signs but they are all cocks and I for one will be happy to see the day they enter the depths of hell and have a red hot poker inserted up their large arses!
-
what is a fair amount of time to wait for a part
spudulike replied to kimtree's topic in Maintenance help
Anything from 1 day to two months. It all depends on where the stock is and if there is no stock, when the next production run is to make it! If your usual dealer doesn't have it on stock, they will go to perhaps, a national distributor and if they don't have it, back to the factory or distributors in other countries. Some of it does depend on how efficiently your local dealer are on chasing through orders and fulfilling them! -
"buttrigging" - is that like .......underpants?
-
Organised chaos in the supply chain
-
Looks more like a stand rather than a dish but can see that the design will stop the soap going mushy on the bottom. I am sure someone on here will make you one
-
Make sure the gap is set with a typical business card and yank it harder as the vicar said to the actress
-
Got enough challenges with my customers saws! I do wonder what would happen if you did get one of these saws and do the works on it but haven't got the time and really can't be bothered as I have better things to do! Hope your saws are behaving now?
-
Personally I would look at buying something like a Stihl MS260 in relatively decent shape. They are pretty robust and spares are also easy to find and lots of aftermarket kit if you need to keep the costs down. You liked the MS362, why go down several levels and realise that you have made a mistake when you find the Efco a bit "Home owner" rather than pro arb!
-
Feck off......with the greatest of disrespect!
-
stihl Replacing cylinder and piston Stihl MS 260
spudulike replied to Craig Howe's topic in Chainsaws
Never seen long noise and rounded noise pliers, all my pliers have noses -
There is a flanged bush 537 20 28-01 that fits on the crankcase, this gets put in place, the chain brake handle spigot is placed in or near the hole it needs to fit in to above the recoil cover side, the chain brake handle hole that fits on the flanged bush is placed over it, the sprung bar 505 20 12-01 is pushed back with a small screw driver as the handle is pushed in to place. It is relatively easy and simple task.....the bolt 526 83 45-01 is then put back in the hole and done up so it meets the flanged bush however you cant see it mating! http://www.hsqintec.sk/vykres/t540xp-mot.-pila.pdf
-
stihl Replacing cylinder and piston Stihl MS 260
spudulike replied to Craig Howe's topic in Chainsaws
So it needs new clutch springs to get over the chain running at idle and 026/MS260s suffer with the piston skirts wearing. Fit a decent piston and new springs, worth checking the plating especially if it has an earlier wire mesh air filter but seems like and easy refurb to me! -
Been working on this MS880, it has been seized and has some mighty strange damage to the top front edge of the piston crown. It almost looks like pre-ignition or a porous casting. The bore cleaned up nicely, Meteor piston arrived today and am porting it - will check the flywheel key and set the mix a bit lower just to make sure as it looked like the top end was nearly new - another fine repair by others!
-
Ah, who said you couldn't kill two birds with one stone Glad all is good again.
-
Feed them through the chipper! Burger anyone?
-
I don't do the Apple thing but am sure this is useful to those that do. I am running a Moto E4 Plus and get between 5-7 days per charge.....I find this Orgasmic TBH.
-
Was that your eBay listing Steve? Looks like a good night out the day before
-
I am sure Matt has been called many things in his life but a "Golden Orb" is probably a first! Nice job though, looks really impressive.
-
That carbon isn't the issue for your poor running, it can be cleaned off by lightly rubbing with scotch-bright but isn't a concern. A compression check is worth doing and if it is 150-170, the pot and piston are probably OK. Clutches can make a saw sound pretty ropey at low revs. The saw top looks pretty clean so it is probably in good condition but worth checking the crank bearings. Set the carb back to one turn out on both screws and see if it livens it up.
-
You can tune the carb a bit more if you like but you need to have a good feel for it as you can really cock things up if you deviate from the normal settings - these are one turn each on both screws, the little bit more ensures correct starting, idle and flat out revs as a little lean can cause issues with poor starting (L screw) and seizure (H screw) Just leave the plug as is, put an hour or two on the saw and see what colour it is - light to dark tan is fine, black means you will need to lean up the high screw a little but go VERY carefully as too lean will make the saw go pop. Glad you sorted it, looks like I may know what I am up to after all
-
I would just set the carb to around 1&1/8th turn out on each screw and adjust the idle to be normal without the chain spinning. If limiters are fitted then just turn the L screw fully out and leave the H screw as is. If this doesn't solve it, you should try the internal carb gauze strainer as it can get clagged up with woodchip. If the diaphragms are OK and the strainer is OK, then it may be one of the issues I mentioned which will be the next step. Always difficult to find an issue without seeing the body!
-
Just read back through the thread, it is a Husky 350....not a bad saw but can have issues. The impulse connector on the inlet manifold/boot tends to split or get squashed when being rebuilt by the inexperienced. Also, the saw can get air leaks where the cylinder mount meets the engineered plastic bottom end. The plastic tends to warp and cause leaks, you can usually tell when doing a leak down test.
-
Seems a bit excessive writing off a saw with a good crank and top end!
