Jump to content

Log in or register to remove this advert

peatff

Veteran Member
  • Posts

    5,859
  • Joined

  • Last visited

Everything posted by peatff

  1. For those without 6 foot monitors.
  2. Cut them down and thin them out and sell them as Christmas trees Have you looked inside the hedge to see how many trunks those conifers have ? I had just one at the bottom of our garden and it had about 8 and was a swine to get at. I dug the root out a couple of years after the stump had died.
  3. Push it out with a screwdriver then plastic weld it and JBweld a plate on top for in future reinforcement. Make something that bolts into the screws holding the dogs on for a bit more cover.
  4. If you are Antipodean get some therapy, the Podean people have been oppressed for long enough and it's time they were recognised as having rights same as the rest of us.
  5. It's only a percentage of magnesium in aluminium typically 0.3 to 3% and will weld with 5356 tig rod but they are prone to cracking.
  6. peatff

    teddy

    What's this, the biggarlogs reality show ?
  7. My friend is an architect and he uses one to get into lofts. They do have their uses..
  8. If you get a 171 for firewood you will be doing a lot of chain sharpening.
  9. My 3 section ladder telescopes out to 27'
  10. peatff

    T540 what bar?

    Where does the grit and crud come from? I only cut wood with my saws. The grease pushes the grit and crud out. I shoot some in when I sharpen the chain and turn the bar.
  11. Put some fuel down the plug hole and if the timing is out you might get some interesting backfires
  12. There's a IIA for sale on gumtree looks like it needs some TLC as well but it's all there and he says he has spares for them.
  13. They will not stand for aggression man. [ame] [/ame]
  14. I should imagine they have paid for the equipment and software to do the job or they know a friendly dealer. It needs to connect to the Husqvarna network to download updates I would think so any unauthorised copies would soon be detected.
  15. Some things are better left not said
  16. Sorry I misunderstood the question.
  17. I daren't offer to wash mine, they are sludged up to the knees. I reckon pressure washing is the best option.
  18. Get her a Hoover and tell her to run round after that
  19. I bet it's gone up in value because it's well seasoned, who's laughing now Mark (probably still you though)
  20. peatff

    Dolmar

    Here again, Hermes delivery on roof . They left it in a safe place though.
  21. Did Kanye West put her up for sale ? She might not be much good as a snow blower but she could soon defrost your windscreen if she sat on it.
  22. peatff

    Dolmar

    Makita is made in Germany according to Makita
  23. Don't they split them with a froe ? [ame=http://www.amazon.co.uk/Peavey-Shingle-Froe/dp/B0037M8QSQ]Shingle Froe: Amazon.co.uk: DIY & Tools@@AMEPARAM@@http://ecx.images-amazon.com/images/I/412qs2feupL.@@AMEPARAM@@412qs2feupL[/ame]
  24. Condom replacement ?
  25. We've been using it for a few months with no big problems. If you have an old computer it might struggle with some drivers like graphic card though.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.