doobin

Old Fords and massey are overpriced and underspecced if you actually want to work with it. For that the price you could get an international or David brown with power loader, power steering, pick up hitch and a drawbar, two speed pto, more horsepower etc

Leylandii and larch are bloody brilliant firewoods.

Impact wrenches are fantastic tools. I have the big 3/4 makita, smaller 1/2” makita plus a right angle mikwaukee 1/2” which is proper handy.

Having looked at the woodsure site, I see no reason why you can’t sell over 2m3 so long as accompanied with the lengthy declaration regarding home seasoning.

The Stihl MS241 on a picco chain is perfect power to weight ratio for coppicing- it weighs near on the same as the MS181 but far more power. However, I've had two and they both ate the drive shaft. Gone over to Echo (CS501SX) and I really rate it. I'd have a look at their range if I were you.

The missus got me to try sushi last year, I thought I'd hate it being the paragon of red eat meating manliness that I am. To my surprise it was bloody delicious.

Yes we do.

Don't forget the bark chippings. You know, those bags that are sold in garden centres that contain only bark? Tree surgeons strip the bark off and chip it before felling the tree and it's a shame to let it go to waste.

What I can't work out is why a millionaire's son is dicking around charging £1 a window (figures from his website, and don't worry, he's a licensed window cleaner, plus you know he's trustworthy because he was a fireman for 18 years.) At least Donald Trump's father set him up in property. A 10k hot wash system doesn't really compare to your first office block.

This always happens on these threads- the true motivation slips out.. Seems to me you just want the tree out and see your son's allergy as a convenient heart-wrencher. My advice? Don't buy a rabbit hutch with a big tree next to it unless you like trees.

I loved the 241 and was pretty much Stihl like a stick of rock at the time. But both saws I bought just weren’t reliable.

As a follow up to this- I'm really starting to like the Echo. Despite the extra vibes, the awkward chain changing, despite the way the MS241 is more ergonomic in every way, for some reason after four months of having both on the shelf the Echo is the one I reach for every time. It just rips with a picco chain. Raw power- does the job and makes me smile. Sold the MS241 for £350 yesterday and don't thnk I'll miss it.

Perfect.

Looks like 6mm, possibly ten. If so you're laughing. What's the breaker rating? Stick a bolt in the fuse and or a 16 amp socket in and crack on. Big vote for R tech here.

If using a three pin plug to 16amp adaptor then the fuse is redundant so long as the adaptor cable is sufficent (2.5mm) It's not a safety device as the welder will draw more than 13 amps. If it makes you feel better he could just wire a 16 amp socket into the ring main, or even hardwire it, but the effect would be the same as running a proper 32 amp plug and breaker. The only difference is that the 20 amp breaker might trip under sustained full chat. It's no less safe. A fuse is simply there to protect the appliance and wiring, which in this case is rated way in excess of the fuse. The RCD and MCB protect the user. All the pins in any socket are more than capable of handling the current- they go down to poxy 2.5mm wire don't they?? I've never used the stupidly massive 32 amp sockets, 16 amp is plenty. An inverter mig can be had for a few hundred, so no, your advice is not spot on given the other facets of MIG welding such as heavy gas and multi pass that will allow the OP to use a technique he is comfortable with to get more than adequate results.

Given that any invertor mig welder will happily run stick then I'd have to disagree with this as a course of action for OP, especially if he's used to MIG Instead, purchase an invertor MIG set of around 200-250 amps capacity. Invertors draw less current than transformer sets. I recommend R-tech. Get a stinger and lead if you want to do arc as well, and possibly even the spool gun if you fancy trying your hand at MIG ally welding. Next, replace the fuse in the plug with a bolt. This will allow you to draw current to the maximum amperage of your breaker, usually 20 amps. It's not ideal, but it's a workaround. You need to check that you have a decent (2.5mm cable min if a spur) to the breaker, and if welding high be prepared have nothing on the breaker save the welder. The machine won't draw any more amps than it needs, and you'll need to be running pretty hot and long to trip a 20 amp breaker. I've just installed a mezzanine floor in my new yard, running almost full pelt on an Rtech 250 amp machine on 10mm steel. This was running off a 20 amp breaker (not got around to sorting the electrics yet) and 40m of 2.5mm artic cable (plus bolt in the fuse...) It's not ideal, but 99% of the time you will not be running anywhere near full welder capacity, so for the odd loader bracket (and using multiple passes) this will see you right. The other thing to read up upon is the use of a gas with more carbon dioxide in the mix- 15 or 20% as opposed to 5%: Hobbyweld Product Range | Hobbyweld 15 MIG Welding Gas HOBBYWELD.CO.UK Hobbyweld 15 MIG welding gas is most popular for heavier MIG welding applications; Including structural steel work... Essentially this will give you a hotter weld pool and more penetration if used correctly. You will notice this if switching to 15% from 5%- you will need less voltage and be able to run more wire feed/amps. Coupled with removing the bottleneck of the fuse, this will see you right for any tractor loader brackets. Eventually, you might get round to installing a proper 32amp supply, which as mentioned will open up a lot of options such as bigger compressors, plasma and the like.

16.5-17k base spec, 19k in that spec with lots of options ticked inc lights, proportional rockers for services/offset, extra service for rotator, comfy seat, extra counterweight, more powerful track motors from e20 and a hydraulic hitch. Got in on 5 years 0% too, but that was the March price and I waited till November for delivery as factory special. God knows what lead times are like now even for basic uk spec. Bobcat wins for me (at the moment) on price inc free finance and most importantly the ability to customise cheaply, such as twin aux which is a must for Arb work. Only three manufacturers would provide a similar spec (cat and Takeuchi) and both worked out around 7k more once you take finance over 5 years into account. Both base machines were more, and both wanted stupid money for the extra service, in Takeuchis case as a third part mod. With bobcat it’s all integrated. the finance over 5 years gives me good leverage. I have a micro, 1.9, 2.7 and a 2t tracked dumper and my repayments are £1200 a month. With these machines and my attachments I can tackle all small jobs and plenty of mid scale ones too. I have a bit of a niche where we are highly mechanised but also diverse, so I can’t have any one thing costing me too much money per month as there’s no guarantee if will be used that month! On the plus side, we are never short of work. But bobcat backup isn’t always brilliant and stevie wonder must do their pdi. They are only really winning on price currently, though I’m getting on well with the e27 and the micro is the best true micro on the market for me. twin aux is easier to find when you get up to 2.7t, and I almost had a kubota rather than the bobcat then as there was only the finance in it. hope this helps.

That looks a very fair price.

Customers kid having a go. Start em young 👍🏻

Wacker is also top of the price. The vds is for levelling up when running sideways on a slope- for real steep slopes you have to go up them perpendicular with the blade at the bottom so vds is no help whatsoever as it also raises your centre of gravity! Better off with a tilting bucket for bank work in my book.

You’d barely get decent stock net and and two barb for that price round here.

Picco chain is very forgiving. If you have to put that much pressure on maybe the file is goosed.

Not a bad saw. Never tried anything else so there might be better out there but if you already have batteries then it’s cheap as chips. Use ours for fencing, quick small garden take-downs and indoors. Handy to have.

Still one rose flower hanging on in my garden too. Dan, I'd need to see your missus first. No offense like.

I got myself a set of those digital torque reader things that you put between the bar and the socket. No idea how good they are as not had call to use them yet.