Today's Posts

Wordle 1,686 3/6 🟨🟨⬜⬜⬜ ⬜⬜🟩🟨⬜ 🟩🟩🟩🟩🟩

David brown in the surgery. Head off, had to use some ingenuity as I had to get it up and then over the loader arms which are set quite high. Ended up with rope tied of one side of the roof, down the the head and the up to a pulley the other side of the roof and then down to me. Part of the problem was getting the head up and off the long studs off the block. Once off I was hopping I would see a clear reason why I had two bent pushrods on cylinder three, nothing clear cut, no witness marks to indicate the piston had hit the valves.

Good Morning Know how you feel Doug. 500+ miles this week and It's not over. Please can I have an easy one. New site though. Wokingham. Unknown territory, managed to bypass it until today. Have a splendid weekend.

The China will be the UK’s salvation trip Mark, don’t you buy into it. You wonder why I question the wisdom of your degree level education 🤷‍♂️ What was it in by the way??.

A big city-slicker lawyer went duck hunting. He shot and dropped a bird, but it fell into a farmer's field on the other side of a fence. As the lawyer climbed over the fence, an elderly farmer drove up on his tractor and asked him what he was doing. The lawyer said, "I shot a duck and it fell in this field, and now I'm going to get it." The old farmer replied, "This is my property, and you are not coming over here." The angry lawyer said, "I am one of the best trial attorneys in the country and, if you don't let me get that duck, I'll sue you and take everything you own." The old farmer smiled and said, "Apparently, you don't know how we settle disputes in these parts. We settle small disagreements with the 'Three Kick Rule.'" The lawyer asked, "What is the 'Three Kick Rule'?" The Farmer replied, "Well, because the dispute occurs on my land, I get to go first. I kick you three times and then you kick me three times and so on back and forth until someone gives up." The lawyer quickly thought about the proposed contest and decided that he could easily take the old codger. He agreed to abide by the local custom. The old farmer slowly climbed down from the tractor and walked up to the attorney. His first kick planted the toe of his heavy steel toed work boot into the lawyer's groin and dropped him to his knees. His second kick to the midriff sent the lawyer's last meal gush'n' from his mouth. The lawyer was on all fours when the farmer's third kick to his rear end, sent him face-first into a fresh cow pie. The lawyer summoned every bit of his will and dragged himself to his feet. Wiping his face with the arm of his jacket, he said, "Okay, you old fart. Now it's my turn." The old farmer smiled and said, "Nah, I give up. You can have the duck."

Comprehension 🤔Stick to the TDS thread if you want a Trump drip wee man, liars and anonymous blaggers tend to get away with a lot more in there. Alternative is you getting your arse handed to you big time again. I wasn’t aware you had imposed time limits on replies 🤣 I’ll say one thing SP/TA you are one thick skinned shameless bugger. Actually on second thoughts you did sulk for a couple of days after a dose of public humiliation but at the end of day it’s a free country for now so I guess you are entitled to your opinion albeit most of the time it’s based on nothing but google rather than life experiences.

Kram, it's obvious that you're fully comitted to your current level of understanding. Why let experience interfere with what you can learn on line Best of luck.

I've got RAC cover on my van. Never had to pay for it either in 4 years yet. The first year was thrown in for free as a perk when I bought the van. Every year thereafter it's been renewed without me paying a penny. Must be some or other admin error somewhere. Or, after reading this thread, maybe it's just not worth anything anyway. I've had to call them out once. No drama; they came quickly and fixed the issue and we were on our way. (Though I suspect that may have been luck as it was an intermittent fault with the injectors, two of which I had to replace shortly afterwards).

Never had this either, so many e-clips in the world working fine there is something wrong with your setup. Either the clip , shaft, chain, sprocket.

But.. on the positive side, you now have: Way better traction Less lawn tyre pressure 4'' more ground clearance Looks the business/much more fun to bounce around in ! 😆

Lovely job looks smashing what a view too sit and have a cuppa and admire your work

A lot of upvc fascia/gutter suppliers run them, long lengths but lightweight. Looks like that one is owned by dab tho who do construction in acaffolding

Another one from yesterday, rotten chesnut, stem filled with soil and not much wood holding it up. Other guy had already topped the brush off the day before and left it for me to peice down the stem.

HI John, I hope business is doing well for you. We are based just outside of Llay in Wrexham and wanted to inform you of our tip site should you have any spare logs, hardwood or softwood that may make disposal a little easier for yourself. I also have a decent size trailer and would be happy from time to time to collect from local work sites. Wishing you a Happy and healthy 2026 Regards Rob robswood 01244912999

Right, so coming back to this, my hydraulic couplings haven't got any easier. I can see some writing stamped on some of these parts: DNP PLT 4 ISO10M - M19 ITALY and DNP PLT4 ISO10F - I19 ITALY. What's confusing is that the two sides don't look the same. This might be because my grab isn't a standard part; it was fabbed up to fit my Sherpa from an Intermercato grab by the previous owner. I'm looking at buying Manuli Female Half Only 3/8" BSP 3/8" Size Quick Release Coupling WWW.LSENGINEERS.CO.UK Overview: The Manuli Female Half Only 3/8" BSP Quick Release Coupling is a genuine Manuli part for reliable fluid transfer in hydraulic and pneumatic circuits. Built from... and Manuli Female Half Only 3/8" BSP 3/8" Size Quick Release Coupling WWW.LSENGINEERS.CO.UK Overview: The Manuli Female Half Only 3/8" BSP Quick Release Coupling is a genuine Manuli part for reliable fluid transfer in hydraulic and pneumatic circuits. Built from... Anybody care to comment on whether they will or will not do the job? What's going at the black bracket end there? Is that a different part I will need to replace as well? Also @doobin and other Sherpa owners, does this look familiar or are your couplings different?

Zac, sent you a PM.

Please help shape the revision of BS3998. The following link takes about 10 mins to complete. We want to hear from as many professionals as possible

Please help shape the revision of BS3998. The following link takes about 10 mins to complete. We want to hear from as many professionals as possible

Please help shape the revision of BS3998. The following link takes about 10 mins to complete. We want to hear from as many professionals as possible

I helicoiled the spark plug thread in a VW Fastback once . Took the engine out to get at it . I asked an old VW air cooled expert ( long time dead now ) called Rudolph Krouzer how I should get the swarf out . He said put the engine back in and start it up . The mag/alloy swarf will just burn away . It did .

If its for a wildlife charity its about a pound a tree , that was what two forestry companies were charging

Yeah, aged 14 I got out blind bearings in motorcycles by sticking the case in my mum's oven at full whack until they just fell out... but as you say , sometimes the case needed thumped on a plank 👍

Pat Mustard, firing on all cylinders in the south of France.

Cheers ill have a look

I didn't realise it but we have one of the 540 batteries in stock. It is big!