Today's Posts

In fairness, Brexit was a shit idea implemented terribly by morons. The world has changed hugely since 2016, and closeness to our European neighbours is more important than ever. Reintegration cannot come soon enough.

Hi all can someone tell me where the solenoid for the feeders is located

I use one for milling chains. I want the chains the same so you don’t get a bad cut with loads of cutter marks on boards. They work well , I usually brush a bit of oil on each cutter to keep them cooler and don’t go heavy pulling it in to the cutter and back it off two three times.. it’s worth the effort for milling but not faster sharpening and not as good for getting a fast cutting chain with deep gullets for felling and cross cutting work.

Mine used to, changed exhaust cover to a twin port, which improved matters by reducing heat on the chain brake handle.

OK so the Crown prosecution service thinks that there is enough credible evidence to secure a prosecution.... will that do you? so back to your post are you suggesting that a criminal should not be prosecuted? Or is it just the white criminals you feel that way for?

5/5 and no pecking today. Threats apparently all required.

put up some pictures!

Hi Everyone I'm changing careers into arboriculture and have my CS30 and CS31 tickets. My CS38 course begins 23rd June, and I'll be looking to schedule my CS39 shortly afterwards (all self-funded). As of July I'll be available to start work immediately (at the moment I'm working my notice period at my current employer). I'm looking for opportunities in the North West of England (ideally). I'm based in south Manchester, but have access to a car and wouldn't be against relocating for the right company/opportunity. If you know anybody looking for reliable, hard-working people then feel free to pass my number over to them: 07759558045. Many thanks in advance for any help you can provide. Ian Taylor

https://www.linkedin.com/feed/update/urn:li:groupPost:12867447-7330819997021130754?utm_medium=ios_app&rcm=ACoAADB-kJ0BWrJUW5tVr2sxqvep_SKvMEUK9bk&utm_source=screenshot_social_share&utm_campaign=copy_link 84 hrs a week I’m banging in on my current contract 👍at least I know my tax is being spent wisely, surprised the guy didn’t trip over all the kids in there😳🤷‍♂️. Meanwhile that’s another record day 800 at 42k a year so another £33 million plus per year for the good old British worker to find. Labour are definitely the party of growth when it comes to illegal immigration and spending other peoples money.

That has crossed my mind on several occasions 😂

Traffic management are supplying lights and doing permit so I don't have hassle. But it is.

Thank u so much il have a try tomorrow n let u no

Way more money in being a service engineer! Much less effort too. Are you really ready to start at the bottom of a career again?

The intake valve wiggle at the end of the motion that you describe is actually a good thing, being the compression release motion of the camshaft. I'm dealing with an engine with a broken comp release at the moment. But the lifter or crank could be bent, you wont really know unless you take the sump off. You may have to do this anyway once you are sure the valves are set ok. Its worth spending a fair bit of time to get the valves adjusted properly. The engine turns counter clockwise when looking from above. Use a headtorch to see when the piston is at top dead centre, then go on 1/4 inch. I would get a feeler guage. turn the engine over a few times, then check again. Black smoke sounds like the valve seal issue. But it might clear up on running. You should be able to move the valves in and out a bit by hand, do they all feel the same?

Wordle 1,432 3/6 ⬜⬜🟩🟩⬜ ⬜⬜🟩🟩⬜ 🟩🟩🟩🟩🟩

Buy a cheap dual port from eBay.

Morning All.

I’ve cut back what I can and in doing so I found a few of these…….

A brief derail into Faces in Figs.

Any one know any company in UK who sells fuel tank guard for ms462 tried USA don't post to uk

I am cool with my neighbours bin emptying being prioritised over mine though, as I’d rather not look at everyone else’s crap blowing about in the wind - and I can trust myself to manage mine.

Thanks mate big help is this picture the solenoid

Did you ask them to fix a Honda motor or fix a wallenstein? Any decent mower, chainsaw outlet should be able to sort that? Is the oil level correct? If you can’t get it fixed I’ll buy it off you as is and part ex a splitting axe ?