Jump to content

Log in or register to remove this advert

spuddog0507

Veteran Member
 View Profile  See their activity

  • Posts

    2,388

  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Everything posted by spuddog0507

  1. spuddog0507
    in reply to all above the main object of the day was for the guy who was working with me to see and learn about getting heavily weighted back leaners over with out destroying fences, tractor and winch is on site and yes thats the the way, but thats not always the case and defeating the task in hand on the day , friday aft we had a stiff blustery west wind blowing and it took about 20% 0f the effort to get them over as it did on the sat with no wind what so ever but that tree was left for sat as it was one of the worse ones and i thought it was a good example to learn on. done a few of these personally over the last 25 years and that tree in the video was about the farest i have had a tree wedged over with out it actually going and yes it was hard work to get it from where it was when starting to where it was before it finally went over.
  2. spuddog0507
    hi steve 5 plastic spaced round base get them in then 3 high lift get them all way in then plastics out and a slice of timber in and start again with plastics get then in to release high lifts and slice of timber in under high lifts and so on till you get it over .
  3. spuddog0507
    8 tonne is a good size trailer, slewing draw bar yes and tyres as wide as you can.
  4. spuddog0507
    had a day yesterday felling edge trees on a job ,all back weighted and took some getting over probably spent 4 hrs swinging hammer banging wedges in, but when trees need tipping over that point called centre of gravity and all that weight is on the opposite side it takes a bit of effort to get them where you want them, HENCE had to take my belt up a notch about 3pm then when i got home and got saw pants off my jeans where half way down my arse , so i have decided i dont need to go on a diet as what i do seems to work for me lost 11lb in a day. VID_34650309_104200_949[277].mp4
  5. spuddog0507
    hi had both transits and cabstars , present tipper is a 3ltr cabstar 2004 its been the longest i have had a truck for bought it in 2010 and been fantastic , plus points very manoverble in tight spaces , pulls like a train, not bad on fuel and its pulling a 10x5 ifor tipper, mechanics have been so reliable bad points not a truck to be driving for hours in gears a bit clunky but there on cables and its just starting to get a bit of rust on the cab but its not new .
  6. spuddog0507
    yep thats the way to go, customer said to me a few weeks ago that cut is not like them over there, whats that one called (bearing in mind over the last few wks i had explained several cuts to him) i to;d him it was a american holding cut, when its correct title is ,a total bollox cut, we all do it.
  7. spuddog0507
    hi when you say a lorry load do you mean a wagon and drag /arctic load or just the wagon part 12-14 tonne load ? got some dead dry spruce for sale in east lancs 07763013024
  8. spuddog0507
    3 hung up windblown spruce all on the same root plate but trees stacked above each other, so root plate about 18--20ft high cutting the bottom tree got saw stuck so got another saw finished cut, when bottom tree parted from the root plate the rest of the root plate and trees collapsed and noway on this earth was i going to try and grab the saw hence it ended up being driven in to the ground with 2 big spruce sat on top of it,,, Oh F--k , 8 month old 461 so thats best part of a grand gone in about 1 second, but on a brighter note the air filter is ok . took bar n chain off and it started .
  9. spuddog0507
    if i had the parts here it would be up and running for tomorrow, but i aint got the parts so its a internet search night,
  10. spuddog0507
    thats not what said, it was definatly XXXXXXXX rated,,
  11. spuddog0507
    had a slight accident today with a saw, and it didnt even last one round, stihl vrs 30" spruce tree
  12. spuddog0507
    i wouldnt be with out mine. 10x5 ifor tipper.move a fair amount with it on a weekly basis,
  13. spuddog0507
    it pays to shop around, sometimes it can pay dividends, recently i was searching the net every evening looking for a particular hydraulic pump around 80cc per rev the pump on eaton vickers website £2780 plus vat as i was in no big panick for the pump i just kept looking then came across a hydraulic co that was closing got the pump i needed for £50 plus £15 carrige so as the saying goes patience pays. my big pet hate is costa lot coffee only been once 2 coffees 2 buns £11.80 never again jar of coffee in aldi £2.09 for about 50 cup full and 89p for 4 buns.
  14. spuddog0507
    SORRY don't agree trees will always be here gas wont,
  15. spuddog0507
    I think I would be firing that accountant off, business lease is 100% tax deductible that's why there are so many 4x4 pickups about these days.
  16. spuddog0507
    Hi all we still have a few load of softwood firewood left for sale from a Windblown clearanc job, the timber is dead and 90% of it is well seasoned most of it came down about 3 yrs ago delivery will be via 6 wheel timber lorry and drag trailer 2x2.5 mtr bays on lorry and same on the trailer each bag will be stacked to the top of the balster pins with a rough weight of 18-20 tonne. If it was fresh felled weight would be in the region of 33-35 tonne. The timber is £1200 per load + haulage depending on post code for more information and haulage quote phone Gary on 07763013024.
  17. spuddog0507
    Agreed approx 30 yrs using saws before I did any tickets all private jobs , it was only when I got a chance to go subbing for one of the uk,s biggest forestry company's that I had to do the tickets , and yes I did learn something all thou not a lot but some things that I was doing i lernt a easier or quicker way , now a days i see lads using saws and they look like they are shit scared of it and in my book there the ones who will be paying the hospital a visit , some guys who have got tickets imo will never be able to use a saw swiftly and safely ,as long as they have a hole in there a__e .
  18. spuddog0507
    Hi i have a igland 4201 on a 40hp kubota it's not on remotes, but wish I had got the remote kit when I bought it ,good solid but very simple winch been used a fair bit and seems to pull well for its size.
  19. spuddog0507
    IF you was only nearer ?.
  20. spuddog0507
    Hi NPTC city and guilds all the time may be more expensive but more company's & organizations recognize NPTC.
  21. spuddog0507
    I Evening all can any one spread a little information on kwikchip pto chippers has any one on here ever owned one and was it ok, looking at chipping spruce brash & small log, the one I am looking at is a pto 8" with double infeed hydraulic rollers all so looked at some Chinese ones same spec but I don't think they would be up to the job. All comments welcome . many thanks
  22. spuddog0507
    Evening all can any one spread a little information on kwikchip pto chippers has any one on here ever owned one and was it ok, looking at chipping spruce brash & small log, the one I am looking at is a pto 8" with double infeed hydraulic rollers all so looked at some Chinese ones same spec but I don't think they would be up to the job. All comments welcome . many thanks
  23. spuddog0507
    Totally agree with the above better resale value with ifor and a proven bit of kit, just look on fleabag and your answer is there e.g 2 yr old Nugent £1750 Brian James £1500 ifor £2200 other trailers seem to be cheap as chips ? But who Buys them I wouldn't , as i wouldnt consider owt but ifor far cheaper per mile/year to own.
  24. spuddog0507
    J go for the triple with what your doing , load spread over 3 axles and 6 wheels better braking over 6 wheels a d should be a lot more stable when towing .
  25. spuddog0507
    Just runic on a 18" bar good combination . I have some new parts for a 038 in my shed some where a exhaust and a recoil starter housing and there may be more.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.