Jump to content

Log in or register to remove this advert

daveatdave

Veteran Member
  • Posts

    1,203
  • Joined

  • Last visited

Everything posted by daveatdave

  1. any idea what happened as it said it was a police incident happened about 5 am rain all day hear
  2. yes otherwise you run the risk of chipping the blocks
  3. I think that wants to be in the overloaded thread
  4. will the tag microdots stand up to the cleaning of the saw i.e. Blowing with the air line or a paraffin wash etc
  5. yes but I did not pay that sort of price, but they do hold there money if you want to sell it later
  6. I had the Youngman its the best industrial one going I bought it refurbished from a firm in Bradford for not much more than Zarges Tubesca 7 are advertising for they are mainly DIY also it did not state the SWL of it has to be 150 kg in my previous life I was a fully qualified scaffolder and came across quite a few different makes but the Youngman was the best and easiest to erect
  7. owned by the NT they are not managing it properly where are the fire brakes. same as likely moor owned by Bradford council revoked the shooting license at the end of last season and have not touched it since, before the keepers did the moor management
  8. if you are only cutting it 2/3 times each season it could be 2 ft. high when you cut it, get a local farmer in to cut it if there is tractor access it will be a lot cheaper than spending 5k on a mower that will struggle to do the job
  9. a old wood turner I know uses wax to seal the ends of his green stock when he gets it
  10. its only 11.75 inch 3 because you pay for the timber that is lost in the saw cut but its not what you ordered
  11. how did you control boat traffic
  12. I bet they were espaliered originally along the wall it needs a lot of work to get it back the next tree looks like it has fallen over due to too much top growth many years ago look like total neglect for about 5 years then not much tlc before that
  13. Elvis died due to codeine addiction he was sat on the loo straining and brought on the hart attack
  14. you will not dig it out as it can go down 10ft try Gallup pro but it could take 3 years to kill it off
  15. when we were kids we made pea shooters out of it
  16. when global warming is mentioned nothing is said about the rockets and bombs that are used in the wars/conflicts the last figures that I have seen said the uk produce 1% of the global greenhouse gas so if we got to 0% it would not make any difference dos any one have figures of how much co2 is produced to manufacture wind turbines/solar panels from scratch to producing electric into the grid (witch will need replacing after about 20 years) also read a article today about the rise of the electric car saying because of the loss of the fuel duty etc road tolls will be introduced and will cost the average driver £700 per year
  17. was this for the town council, canal and river trust or the E/A.it was on the local radio last week stated the T/C got contractors in to clear the flotsam from the arches near the bank and were complaining that they did not get the flood warning till late morning where the river peeked about 4am. the water level came up to about 2ft below the top of the arches
  18. did you clean the roof and gutter off on the way down ?
  19. I do not think the private consumer will give a toss as to what logos you have on your logs as long as they burn and are a keen price
  20. is that pile of rubbish what you picked up off the verge or did you just empty the cab
  21. yes 3 in 1 will be ok and you can carry it in the van to use as and when
  22. freezing fog -4 all day it made a wintery landscape on the trees and hedges but no snow this side of the Pennines
  23. do not use wd40 as it will rot the sheathing over time just use thin oil and do it regular
  24. at the moment it can only do British registered motors
  25. what about the wood burning power stations I better start burning my crap now or save it for bonfire night

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.