Jump to content

Log in or register to remove this advert

Stephen Blair

Veteran Member
 View Profile  See their activity

  • Posts

    41,070

  • Joined

  • Last visited

  • Days Won

    76

 Content Type 

Everything posted by Stephen Blair

  1. Stephen Blair
    You 2 remind me of the cartoon Sharky and George!! Sent from my iPad using Arbtalk
  2. Stephen Blair
    I love the part with the guys cutting away what are surely 200-300' trees and you can see the other guys about 40' away doing the same thing! There must of been emmense power in the old steam winches to pull those big logs so easily. Great film, thanks for sharing Sent from my iPad using Arbtalk
  3. Stephen Blair
    New guy I couldn't read your post earlier about levers, and it seems to have disappeared . If it's not coming back under power then maybe it's in the wrong circuit. If it won't come back down, then simply drive up over the pile of chip you have tipped and steer out it, that way it should come down, or just don't tip it over as much in the first place:) Sent from my iPad using Arbtalk
  4. Stephen Blair
    I was told when I started climbing by the boss who had been in the industry at the time for over 50 years. You can't buy bottle! Bottle Meaning courage! I was the first climber to be given a top handle ( husky) and a fancy orange rope! It didn't take me long to work out what he meant! What an Amazing climber!! Sent from my iPhone using Arbtalk
  5. Stephen Blair
    Tell your mrs to stop spoiling your pics mate!!!ha ha:) Sent from my iPhone using Arbtalk
  6. Stephen Blair
    Take that 1 off, put it in a shed and make up a new 1! Or cut it and put it in a big hinge so you can still blast to the side or into trailers. Sent from my iPhone using Arbtalk
  7. Stephen Blair
    Hard to see the higher sprouts, light and phone camera bad combo! Sent from my iPhone using Arbtalk
  8. Stephen Blair
    She's only gone and survived!
  9. Stephen Blair
    The ram is 2 way acting, simply pull pull or push the lever in the other direction and it will pull it down, when it goes itself pop the lever back to the middle then back the way, then it will go down on its own weight. Things can happen, going under an unpropped body is as big a no no as putting a pto on and off with the engine running imo. Friendly advice, again nice clean looking Mog! Sent from my iPhone using Arbtalk
  10. Stephen Blair
    Cut 2 feet off that spout!! Nice Mog:) Sent from my iPhone using Arbtalk
  11. Stephen Blair
    Get a tape, measure the height and put a big sticker in the cab! That valve block is bad for catching stuff! Mine had a big roof rack so I wasn't getting out the hatch or open the sun roof. Sent from my iPad using Arbtalk
  12. Stephen Blair
    Or get a huge top link, and angle the winch! Yours being the short bonnet won't really work with a pole out the side, the wheels are too far forward! I've headed down the road with the grab over the trailer before wondering why all of a sudden the visibility was so much better!! Sent from my iPad using Arbtalk
  13. Stephen Blair
    Put a grab pole on the side mounted by a pin in the front towing eye, makes visibility better. Reverse drive is great, weird reversing a trailer though, I could never get the hang of it lol! Mine was a wheel at the top left, yours is cracking right in the middle! Sent from my iPad using Arbtalk
  14. Stephen Blair
    I Distance from spout to bed is too far, the velocity of the chip is slow, no stress makes it dribble. Often the spout height is lower than the height of the front of the box so is always aimed up the way, so causes ricochete. Get a Mog and pto chipper, a non spill unit. Loads of power and draft behind the chip, spout is high and very close to the chip box, mine is actually just inside the box and the opening to the whole box is about 12"x8", so not much room for it too bounce back even when getting full. Edit, apologies I have just read again and you haven't mentioned your set up, I have presumed it's a tipper and tow behind! Sent from my iPad using Arbtalk
  15. Stephen Blair
    I was feeling sick with the head calm! I have to laugh though first 10 mins your lowering small stuff with ropes everywhere, then at the end, you knock half the tree out in a owner!! Were you needing the toilet by any chance! Big tree, nice loader. Sent from my iPad using Arbtalk
  16. Stephen Blair
    Very nice!!! I didn't know it was going to be so high spec, and front linkage. A nice bonus there. That wee winch will need upgraded next! Sent from my iPad using Arbtalk
  17. Stephen Blair
    I think it's his own 1:) Sent from my iPad using Arbtalk
  18. Stephen Blair
    Besides rope and harness work off Cliff faces I just mountain goat it, I love it! I once made a 60 ft beech do a full 360 in mid air before hitting the deck. Brilliant job, about 60 off a cliff face, you can see the gap from the moon I bet!! Thing to watch is if they are leaners you can't let them pull at the hinge or the root plate starts pulling the rocks out the ground your standing on, had a Groundie try and crawl up a rock face covered in wild garlic in a panick as I was waiting to give the cut a final blip once it had got past the tickly bit! All good fun. Felled for processors in Kintyre when I first started out and for the skyline, that was steep old ground. Sent from my iPad using Arbtalk
  19. Stephen Blair
    Diff lock, great link. My idea looks great ! Steve metal detector sensors in forage harvesters are the same set up as Chippers, metal everything, the sensor is in a metal roller, don't know how it works, but it does . Ted, we don't want to chip metal, it wrecks our machines. Morbark obviously have this Sussed. I'd love this on my chipper. Sent from my iPhone using Arbtalk
  20. Stephen Blair
    I think Chippers should have sensors in the hoppers and the thing that sets them off stopping the rollers should be attached to gloves, sleeves or bracelets of some kind. The argument would be from folk that have had a scare wearing these items of clothing, but it's only scary as the rollers kept turning! If the rollers has stopped like a chain break on a saw, it would of been reassuring! Forage harvesters have metal detectors built into the rollers that stop them to save damage. Sent from my iPad using Arbtalk
  21. Stephen Blair
    Glug a few litres of chain oil down the back of it. Sent from my iPad using Arbtalk
  22. Stephen Blair
    Have you jammed a log under the big bar at the back yet? Sent from my iPad using Arbtalk
  23. Stephen Blair
    Id get the remote checked out, they can get a fare bit of abuse, 1 lad dropped mine years ago and it broke it off its mounts inside. Sent from my iPhone using Arbtalk
  24. Stephen Blair
    Cracking looking truck Simon! Hope all is well mate Sent from my iPad using Arbtalk
  25. Stephen Blair
    I agree, big diference between commission and back handlers. Sent from my iPad using Arbtalk

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.