Macpherson

Similar happened on Skye a few years back, the high voltage set the machine on fire so the poor bloke eventually had to jump and was killed pdq, can't remember how many volts but I think just about any overhead power are well dodgy.....it looks your driver had one foot in the grave from the photo, lucky man, cheers.

Just a thought....you've got to remember whatever species you burn the trees slowly grown in high Scandinavia bear very little resemblance to the same species grown for instance in the wet environment here in Scotland....never mind further south. I have a cabin made of arctic circle spruce { Norway I presume }, the growth rings are 1 - 2 mm apart and the wood is quite hard and dense.... In the FC plantation near to me the Spruce albeit Sitka the gap between the rings can often be up to 1/2" so carting that away for firewood is a bit soul destroying as it's very wet and weighs sfa when dry....the shit you buy in Jewsons or a post that rots in 3 years ! As a matter of comparison I recently dropped a self seeded stand alone Sitka and as soon as I knocked out the gob I was delighted to see how tight grained it was compared to the same trees a 100 yards away in a plantation....it was knocking on for 80 years old 75' and about 30" dbh. whereas other trees of the same size recently harvested were only 35 - 40...... I burn mostly Birch and love it....I do dampen down at night, it really never goes out and every now and then I use a bit of chipboard to raise the temp enough to set up the flue and have a controlled burn. Arctic circle Birch must be amazing firewood....can't wait to try the tatty peelings?

Hi, yeah your probably right there...I read somewhere that the holes you see are from when the adult bugs emerge and fly off so it can be a good idea to find out if the infestation is still active....one way of doing this is to hoover up all the dust as best you can and wait till the appropriate time of year to see if more dust appears or not....I know with furniture and small stuff for instance folk inject down the holes to get the larvae, but obviously that's not practical for you, cooking the wee buggers might be the way to go. I still think a borax solution could be a good cost effective way of protecting any timbers of your property that are so far untouched.....When I mix up a solution to paint on freshly milled timber 1kg of powder dissolves into 5 gallons of {hot} water so it goes quite far. good luck. https://www.ebay.co.uk/itm/Borax-Sodium-Tetraborate-Decahydrate-99-9-Lab-Grade-500g-1KG-2KG-5KG-10KG-25KG/321094621563?hash=item4ac2bb197b:m:mpNzfokOBvQTL1AwYsJjjnQ:rk:1:pf:1&frcectupt=true

Hi, also look into treating the timber and any other timbers with a sodium borate solution... borax, it's the been the basis of many wood treatments and other stuff for decades and the common salt is real cheap on ebay .. give it a google.

I'm up the west coast, the prevailing wind is more than often SW....a lot of rain and even so my air dried firewood at the moment is sitting at about between 12 - 15 % mc after roughly 9 months. Mostly Birch and Alder. 1" boards are at about the same or quicker than the firewood and most of the big stuff, Larch, cedar and Douglas mostly [ 2 1/4" ] will get to a similar mc in about 12 - 15 months. We quite often get drying easterly with some sun in the spring at which point I usually try to take advantage and rip to a slight oversize if I know what I'm gonna use it for, re-stack inside for a while to get it a bit drier before using as is or planing to a finish. I'm not doing this as a commercial operation and while on the one hand it's therapeutic and enjoyable... ..on the other it's got to be at times the most effin frustrating thing I've ever done ....... However as a late starter I've really got the folk on here to thank for the wealth of knowledge and experience that's freely passed on, making what's { at least to me } a really steep learning curve much more achievable... so cheers ??

Personally I don't think trying to rush seasoning works at all, it's fine for firewood, but if you want to use the timber to make something which your going to invest a lot of time and effort in it really wants to be as stable as possible....and time is the answer, just my take on it..........and as you said.. some Larch being possibly the most frustrating to mill and stack, goes as hard as nails and then moves and goes banana when you plane off an 1/8" ???

Wow that's quite severe......from the photo the top cut looks a bit wavy as well. +1 for the Granberg......and diamond burrs

Interesting vid, thanks.....just about to send off a pair to be resoled... to that workshop presumably, cheers.

Burning cherry at the moment, cut and split in June I think and air dried outside, currently about 12 - 14 mc....lovely stuff

In a nutshell. What channel please ?

+1 for corrugated sheets, I tie round the stack with rope which gives a kind of nissen hut effect and slip of timber under one end so any wind blown water can run off.

If your leaving sitting about for a while Fuel stabiliser is well worth it. http://www.thegreenreaper.co.uk/b3c-ethanol-shield-236ml?gclid=CjwKCAiAyrXiBRAjEiwATI95mdD72Cd72EiHgeenOFOV

Saw this a few times as an apprentice ? https://www.google.com/search?q=file+tang+injuries&rlz=1C1GGRV_enGB751GB752&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiWisTqsYfgAhXGShUIHdRUA8wQ_AUIDigB&biw=1640&bih=756#imgrc=URQggoXg8xkGbM:

Me too, I was more thinking drills, chisels, planes and machine tools etc, cheers.

No difference at all...except to say that not all files are equal, there's a lot of crap tools out there and also much chainsaw chain is getting near to hardness limit of what a normal quality file can deal with which is why they have a shorter life than ..say if you were filing mild steel or many other metals. The thing is, of all the cutting tools I've used over my working life, chain teeth have the only edge I can think of that CAN be file sharpened....Mr Hewn's advice is bang on....good luck.

I see as the threads moved on that you are probably going for the gauge which is fine..... But the file your using is an engineers file, you are performing an engineering task by filing metal and these handles have been the industry standard for decades... .. the file is just tapped in by bringing the handle down on the bench whilst holding the file and can be easily removed if necessary. Cheers

Wouldn't exactly break the bank to buy one........though I do like the rustic version and up here usually use Rowan. Don't think the collet type would work with the tang on a normal file https://www.ebay.co.uk/itm/Draper-Needle-Files-And-Quality-Wooden-File-Handles-For-Engineers/232598980934?_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D1%26asc%3D55148%26meid%3D428ec9907c5246e78c31351943eecce4%26pid%3D100505%26rk%3D1%26rkt%3D1%26%26itm%3D232598980934&_trksid=p2045573.c100505.m3226

https://m.huztl.net/Chainsaw-Repair-Tools-c3056.html There's quite a lot of tools on this site, potentially at a decent price, can anyone vouch for the quality ..or not ? I've found in the past that often the pattern parts look the same as the real thing but in comparison might as well be made of putty.

I think I got the PVA from toolstation...£9 for a gallon, it's got a load of other uses and as Peter said SBR is a waterproof alternative that's also very versatile and used a lot by trowel trades.

Presumably the stickered and stacked timber will be under some kind of cover ... but I take your point

Great word☺️

PVA

I came across similar on some heavily pruned apple trees a few years ago https://www.gardeningknowhow.com/edible/fruits/apples/apple-crown-gall-treatment.htm

I've seen a few hedges that got fairly big, can't see the leaves to well but you might be right

This was about 20 years ago....I'm no expert, maybe I just got lucky.....I could see that the roots regrew in the bags but when planted they hardly put on any growth for the first couple of years and then came away strongly, good luck.