Jump to content

Log in or register to remove this advert

woody paul

Veteran Member
  • Posts

    5,665
  • Joined

  • Last visited

Everything posted by woody paul

  1. Had a look at web and they do thanks. Other opposition might be 12v solenoid switch with switch in cab.
  2. Has anyone rigged a log splitter up with a remote control on hydraulics to opperate from tractor cab.
  3. If you only produce enough chips to fill that in aday you have not worked hard.
  4. Looks like a money pit to me. Me mate runs a 55 plate l200, doing picking up on shoots all season and deer stalking the rest of the time and never had a major problem with it.
  5. Why you felling them so high ??.
  6. Some root removal yesterday and today could any get 1.5ton in garden, Tested trolley out with this hazel root. Liquid amber root was screwed in well landed up with a hole 4ft deep.
  7. It's ok for what I do all ways have a 4m sling to drag bits nearer if needed.
  8. Large pop from last week, firstly reduced them the customer them texted me saying could i take them right down plus the field maples in front of them. 7 loads of chip on landy and 8 loads of timber with tractor and trailer at about 7 ton a load.
  9. Did you get the carb cleaned will you rebuilt it .
  10. Weld the bugger on as well, Belt & Braces .
  11. Biggest flail mower that will go through that gateway .
  12. I have know clever people to weld the to plates on pto shaft just because bolt kept breaking. Also check your bolt is not 12.8 instead of 8.8 this makes a lot of different's I remember a old winch truck i drive all ways snapped 8.8 then we were told it should run a 12.8 never broke any more.
  13. Landy is empty so no.
  14. The 2 stroke is from my local hydraulic company in there named can but the same spec as Fuchs. Carb was fitted as bought and no other mod to cylinder , I do not own a tach.
  15. Adw the carb is 1 with little adjustment on each screw, as for 2 stroke same as used in all my other tools with are a total of 12 machines. Spud the fuel line is new plus filter if you mean gauze filter in carb no as new carb.
  16. As I mentioned all new part fitted and pressure and vac tested. The carb is fix so not much adjustment.
  17. Husky 357xp rebuilt it a month ago New crank seals, intake boot and everything else plus New carb change to Zama. Ran for a half a tank and seized up pressure and vac test has shown no leaks so bit of a head scratcher. Any ideas.
  18. Getting a tractor then fitting a loader can be a nightmare if you go second hand,
  19. All ways get challenged when I take some domestic rubbish ( fridge washing machine etc. ) in truck, all I say is I could not get it in my Bentley.
  20. woody paul

    Flailing

    Christ mate 20p and 30p @ hour got loads you can do.
  21. I looked at a valmet 6400 last year looked a good solid tractor but on test drive the clutch cable went so could not give it a good test and talking to own this had happened a lot in there owning it, is this a common problem.
  22. If you have bat willows near you every chance Wright's contractors will be felling them any way because they get willow from every were even though they are based in Essex . The company that fells 99% of there trees is based near me and they cut all over the place. So your best bet is to find out when any are being cut and get it then as the just burn everything apart from the butt.
  23. 60-70 inch access is good, get a good size loader through there quick then 3 men any day and keeps going .
  24. Cut as big as possible then drag out other compact tractor or quad.
  25. Is that a old Premier chipper on that vessel.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.