woody paul
-
Posts
5,665 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by woody paul
-
I bought one a couple of months ago for my husky 362xp also fit right up to 385xp, it came off EBay and was in the UK had to look for along time then 3 where on there at the same time my one was new old stock £70 round abouts.
-
May have wrong chain fitted so look on bar for info and go from that.
-
As said above but check clutch bearing is OK and that nothing else is jamming clutch to crank shaft ( small bits of wire or string can do this)
-
Removed this ash this morning from pond and left for gardener to clear up. Came over on Monday
-
:thumbup1:
-
Should of said husky 3120xp.
-
Just to check will it pressure up if it has a 1 way valve as you say
-
I had a HTC explorer for 5 years in pocket every day and when climbing did not brake, after a cock up by EE had to get a new phone so replaced it with another.
-
Why is inner tube to thin if sandwiched with carb and exhaust.
-
Got to be my Husky 362 with small mount, modified to 372xp and a 24'' Sugihara bar and full wrap handle.
-
Tip 130 Landy with engine not running from time to time with out a problem. It may be 1battery was draining the other if 1 is in A bad state its what happens.
-
When yer up to it nothing like a cupper.
-
That kept or slid along way from stump.
-
Looked at pruner heads today at dealers silky one look rubbish. Bahco looked good comes in 2 sizes all were by pass .
-
Anyone uses Zega pole setup and how do you get on with them.
-
If you want to know why its good to use this type of cut find two good leaning sweet chestnuts cut the first with back strap and then the second without, O by the way ring for a ambulance before the second leaner.
-
Started this Spruce yesterday afternoon and finished today for got to take pic before starting. Doesn't look tall but it in a hole total height was 85 ft all left on site for customer to deal with.
-
Fendt is a 304ls 1984.
-
Husky 362 upped to 72cc full wrap 24'' bar
-
That loader is narrow who wide.
-
If you are going to replace crane and mount it on rear why have you not fit a 3 way tip as you will need to with crane on rear
-
He just has not got the dangles to do the job properly.
-
Try and get your hands on a second hand husky 353 bit old school some will say but a light saw and packs a punch for It's size.
-
Remote controlled (almost!) double ended chainsaw milling!
woody paul replied to Rob D's topic in Panther Mill UK
26 seconds in there's a office chair in back ground he could make good use of will he was milling. -
Forstner bit is what you need to Google.
