woody paul
-
Posts
5,665 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by woody paul
-
Out of interest what size pulley on engine.
-
It is a slip clutch and come with ether splind , keyed or share bolt. The other thing to think about is to run at 1000 rpm off a tractor with 1000 rpm PTO is have you got to rev the balls out of tractor to get that. We use a 540rpm chipper at run the tractor on 750 rpm pto at lower revs so economy 540rpm uses a lot less fuel.
-
1 end pto shaft other end to shaft or gearbox.
-
For direct drive just bolt one of these to keyed shaft and add pto shaft.
-
Blade is small but splits well, quick as well. 1 problem is blade stops a little bit to short so you need to have a bloke on base, and the other is it has no auto return, but for its size a great splitter and light enough to pick up by hand and move. Made a frame to stand mine on and.got a set of 6m hoses for it so tractor can stand facing splitter and I can chuck logs in to bucket will its plug in back of tractor.
-
Did look at 1 last year because of work load and jobs that were coming in but opted not to but which I had or some thing bigger like an avant. Found this video the other day good bit of camera work:confused1: [ame] [/ame]
-
That looks a great tool but could see cab being hit this is a better machine keeping hold of stuff [ame] [/ame]
-
Giant also make larger loader like an avant, Norcar loaders look good as well and narrow compared to its competitors.
-
That's some belt sander you have.
-
The only problem with direct dive on flywheel shaft is you only got 540rpm or 1000rpm which may not be fast enough.
-
I would sit it below and then belts would be the weak link you will need a means of keep the tension in them.
-
You need a piece of shaft like this but longer some bearing pulleys the right size and some fabrication Splined Shaft 250mm overall 1 3 4 6 Spline
-
Did you just lift it out. Did some many years ago with a Bedford timber crane by lifting rather than pulling came out with all small roots as well.
-
[quote name=Mark Bolam WoodyPaul I kind of get where you're coming from with 8 cuts' date=' but I guarantee that tree is bigger than it looks and you'd muller the garden. I've cut whole pollard heads off in the past on willows with mixed results. Sent from my iPhone using Arbtalk Was joking Mark. The tree in question has been done many times before by the look of it, so as It's been done some how just work out how and do it the same way. I know a couple of odd job gardener that work around my area how would just get a ladder and pruning saw and just re pollard it.
-
Terrasaur blades are not cheap and horrible to use for a long time.
-
From the look of it stand at lower pollard height and cut it about 4 foot up 8 cuts job done.
-
That Schliesing is a good chipper but heavy. There's an agri dealer near me got a timberwolf 150 which is just a lot lighter but you would be nearer the min horse power required on both machines.
-
Do the job at night when there out and about digging up grass lawns and crapping every were.
-
Evolution rage circular saw is your best bet The Evolution RAGE230 Multipurpose 230mm Circular Saw
-
Are you after boards or do you want a lump cut up.
-
Had the things going off for the last 4 nights near me but my dog could not give toss about them just sits there watching them, my brother old Labrador was gun shy but not firework shy. Maybe best to let them see where the noise comes from.
-
£6.99 a bag 10kg in a bag. https://www.logsdirect.co.uk/brackettes.html
-
Wonder what one log costs to produce.
-
That's a good lump of oak it's lifting.
-
To right guarding will not stop everything. My old boss had a fordson major with just a thick plate of steel on the front and that thing would drive through most stuff.
