C.J
-
Posts
759 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by C.J
-
Husqvarna 40 Parts Genuine Choke Lever Rod Control (2a4) | eBay
-
The 40 is identicle except for piston,pot and sticker. Part number 503 10 52-03
-
Had that 2 years ago - a few over hanging trees in the corner of a field and the infra red saterlite thinks its woodland. I took some photos and they sent a nice man up from Truro. It's grazing,my cattle can graze underneath and get shelter and shade. No problem says the man and he goes back to Truro. In an arable field as long as you are drilled up to the 2 meter margin its O.K
-
Mark Bolam has a way with words.
-
The John Deere is 2 tonne to 4 meter and the Merlo is 2.6 tonne to 6 meter. Butt that's not my grab.
-
Like this.
-
As far as I can see , the only relevant change from the SFP , is that you can't cut hedges and fell trees in August. Yes you can't cut hedges and fell trees after 28/2/15 but you can start again on 1/9/15.
-
Cross compliance for BPS - You cannot trim hedges or fell a tree between 1st March and 31st August. However you can hedge lay or coppice between 1st March and 30th April.
-
Take in your Firearms licence and say you know where he lives.
-
I agree with above - butts 8 foot of the ground and all that ivy. If you were closer , I'd come over with me Merlo
-
Husky 545 so 325 chain.
-
That will fit. Uses Oregon 95vpx or Husqvarna H30 chain.
-
That's a large mount 3/8" bar for an over 65cc saw. I was going to post lunchtime,but until you know the gauge your just pi55ing in the wind.
-
15" and 64DL sounds like 0.325" pitch ? I would guess 2036 was similar to Husky 136 - So K095 bar mount ? Did Jonsered use Pixel chain (0.050) or 0.058 gauge ? Let us know if you guessed it right.
-
Peanut butter.
-
Lightning conductor ?
-
Oregon full skip chisel chain 3/8 .063 now available at chainsawbars.co.uk
C.J replied to Rob D's topic in Chainsawbars
I usually have to wait 10 days for 75JGX,73JGX and 73LGX 3 days to cross USA and Atlantic and a week for the last 300 miles:banghead: -
Just some random picture Don't think RS3 is available in 325 or 1.5mm Description says RS full chisel I think I've had 8-9 chains of Martin(Kwikchip) and never had any problems:thumbup:
-
Two 2 x 15" 37cm Husqvarna Genuine Stihl Chainsaw Chain 325" 1.5mm 64 DL Tracked | eBay I hope Rob D gave you a good discount
-
-
550xp and 560xp both use 505 20 08-01,562xp uses 577 54 81-01 What do you mean by already set up ? - Hammer it on?
-
In that case you just need a small 7x3/8" rim +B&C.You can keep the same Clutch drum and worm drive.
-
You may need a new worm drive , for the oil pump , to suit your new sprocket.
-
Does it need to have a S&M dungeon ?
-
That fence hardly shouts "keep out private property"
