Alycidon
-
Posts
2,868 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by Alycidon
-
Yes I do, name had slipped my mind yesterday. We rip them out on a regular basis and replace with a stove, not one complaint ever, A
-
This is a haifway house between a stove and an open fire. We have had them here under another brand name for many years. There is still nothing stopping heat from the fire rising up the chimney, so if the cost is only £150 or so then its probably worth it if fitting is DIY. Otherwise do the job properly and install a stove with a galvanised steel register plate in the chimney to prevent heat loss. A
-
'Worlds least polluting woodburner'
Alycidon replied to woodrascal's topic in Log burning stoves and fireplaces
That will be a turn up for the book. They are decent stoves but deffo not first division. A -
Hetas, Woodsure, Ready to Burn and Grown in Britain
Alycidon replied to Chalgravesteve's topic in Firewood forum
Its all a con, the max allowed MC is 20%, thats pretty poor, stove manufacturers all want 15%-16%. They charge you so much a tonn, audit your suppliers, the product and the process you use, money for old rope. Cuts no ice with punters who will change suppliers for £2. A -
I use a 462 with a 25 inch bar, pulls it fine in my book. Pulls a 20 better but so it should. Agree with Husky unreliable comments, I have a 560XP which has not been anywhere near as reliable as previous Husky saws. A
-
Wood burns from the top down, you only use air from below when starting the fire from cold. thus the device by the sound of it is no use at all in most real life situations unless burning solid fuel. I suppose that might appeal to the boat boys, but reducing the primary air flow will reduce the heat output and increase flue deposits and pollution into the atmosphere. A
-
20% is the max limit currently advised by Woodsure, the firewood arm of Hetas, stove manufacturers are on paper having to fall in line but talk to their tech people, they want max 15% or 16%. Reserch recently has suggested that the optimum MC for minimal emissions is 10%-12%. All stove will burn 20% wood yes, but emissions will be higher. more soot, slight deposits on the glass etc. Wack some 5%- 10% stuff in there and no issues at all. I do NOT belong to Woodsure, the levels are in my book far to high, but they are being led by the nose by CW, the Woodsure fees are so much a ton so they need CW on board to pay their overheads. A
-
This is a proposed Europe wide directive, yet the actual requirements have still NOT been set in stone. A
-
The Defra approved Squirrel ( 1412) is compliant due to its tiecery air system, the other Squirrels the design of which dates from 1950 are likely to be discontinued and replaced by the new 2850 wood burner, A
-
a recommended showroom for Stihl or Husqvarna?
Alycidon replied to DANIELCOPE's topic in General chat
Farol Ltd, Byfield. I bought a 462 from them recently and they undercut the web without being pressured. Good buying experience. https://www.farol.co.uk/byfield-contacts -
As an Esse dealer I would be very interested to hear who at Esse said that, pm if necessary. All stove manufacturers want 16% or less, the 20% is driven by HETAS/Woodsure and the stove manufacturers are trying to keep in line until Woodsure drops the level further. Arada research has advised that the optimum moisture level for minimal emissions is 10%-12%. A
-
And they ( Landcruiser Amazon) are very nice to drive. A
-
Interesting. Its an Iveco though so how about reliability, would not fancy taking one into a desert. Wonder how the fuel consumpstion stacks up against the Toyota. Cant be as unreliable as Disco 3 and 4 though, money pits those things. A
-
In my opinion it is NOT, I had a detailed discussion with Helen Bently-Fox the organiser at an arb show about 5 years ago, costs are far to high, you are paying for them to come out and audit your wood, where it comes from, moisture level etc etc. It cuts no ice at all with many people happy to change suppliers to save £5 on a load. And its being driven by Certainly Wood IMHO, why else would they say 20% MC is acceptable. A
-
About time to, I have had a least half a dozen occurrences of 'kiln dried' wood being 30% plus this winter so far. The 20% that Woodsure and Hetas say is acceptable is simply not low enough, all stove manufacturers want 16% max, some ( Morso for instance) 15%. a
-
This is the Eco Design plan, this proposed Europe wide strategy to reduce emissions by 2022 has been in the wings for a couple of years. The UK stove industry want it introduced in 2020 but that does not look probable. House Coal is the fuel likely to be banned as its very dirty. Old designs of stoves that can be shut right down will be phased out, this has already been happening with some stove manufacturers for a year or so. As far as I am aware there will be no legal requirement to change an old design of stove for an EcoDesign approved one. All EcoDesign stoves should be able to be used within smoke control areas. As a stove retailer I am pleased that finally the govt are finally moving forward with the issue. A
-
What makes stoves so efficient?
Alycidon replied to Steven P's topic in Log burning stoves and fireplaces
The installation of a register plate into the base of the chimney to prevent heat loss up the chimney is the single most important reason why a stove provides far more heat into the room compared to an open fire. I looked at two earlier this week due to poor heat outputs., they had no register plates and flue pipes around 2mm away from oak lintels that were badly charred, builder install in 2005, am amazed the lintels have not caught fire. Thus all the heat generated goes straight up the chimneys. A -
There was one around Nottingham, had a 8 wheel rigid. PM me for details. A
-
Friend of mine has ( or had last time I spoke to him) one of the Lasco cones on an excavator, he does exactly what you are thinking and feeds the broken down stuff through his Posch 360. A
-
Stoves for burning branch loggings
Alycidon replied to Big J's topic in Log burning stoves and fireplaces
The vermont Intrepid is about the only top loading good quality stove that I am aware of, top also doubles as a cooking area, pretty high in cost but long service life, we replaced one a few months ago that had been in place since the owner now in his 50s was a lad. Even then is was changed as the lady did not like it. https://acrheatproducts.com/stove/vermont-castings/defiant-two-in-one-woodstove max size is 9.5kw nominal ( Max around 15kw) so about 130 cubic meters of volume given average insulation. Not sure if its a dedicated wood burner or multifuel, judging by the gap between nominal and max outputs I suspect it is. A -
Steve, Depending on how the brexit and pound go over the next six months I might want some next July. Am now having to register as an importer in case of a no deal brexit. A
-
I have just set up my first payment for July 19 on account under the making tax digital that comes into effect April 19. Seek the advice of a good accountant, not cheap but they do pay for themselves on the longer term. A
-
Q, Using a Defra approved stove do I still need to sweep the chimney and if so how often. A, Yes you do, how often will depend on what you are burning and if you are slumbering the stove. have it swept after six months then be guided by your sweep.
-
Actually not strictly correct but wise advice non the less. You can use a non Defra stove within a SC area but you are limited to burning smokeless fuel only, you are only allowed to burn wood as Bowland says in a Defra approved appliance and not in an open fire. A
-
My smallest net is 3kg of kiln dried softwood, sell at 3.99 inc VAT to retail customers. Cost from memory about 2.30 plus VAT. Imported so need to buy it by the container or mix it with some KD logs. A
