All Activity

That’s totally normal, the splice in my Kalimba is the same. I presume some of the core strands are removed? @Tommy_B is that right?

Wordle 1,518 5/6 ⬜⬜⬜⬜🟨 ⬜🟩⬜⬜⬜ 🟩🟩⬜⬜⬜ 🟩🟩🟨⬜⬜ 🟩🟩🟩🟩🟩

That rope and Cousin Atrax both have very narrow spliced eyes as they're designed to fit through devices like the Petzl Zig Zag. If you’ve ever tried fitting a rope through one you will appreciate it. They need to be flat to fit. If they were any larger they wouldn’t pass through the device. That being said if you’re in any doubt to it’s integrity then don’t use it. Send it back and ask for a replacement. There’s been some recent examples of splicing being done incorrectly on some Marlow Lines which caused them to fail in use. There’s video of it somewhere.

Thanks, that is a great help. I've been looking at the 583 on their website. Going to try get to one of their southern demo days in September and see what the craic is.

Good Morning All.

Back in Shepshed and the noise of the motorway is deafening after Tytherleigh! Loads of phone calls today and up to Retford later. Hoping to have a few leveling pints int Brewshed later! What with jacking job, death of the FIL, estrangement from daughter and grandson and Mum's dementia, life is tough at the moment. Finish Friday please and go home to your family for friday afternoon/evening! High, Dan, Sikh.

Morning all, Looking good for the next few days.

Wordle 1,518 4/6 ⬜⬜⬜⬜🟨 ⬜⬜⬜🟩⬜ ⬜⬜⬜🟩🟩 🟩🟩🟩🟩🟩

Wow. Managed a bit of inspiration after desperation. Very lucky. Wordle 1,518 4/6 ⬛⬛⬛⬛⬛ ⬛⬛⬛⬛⬛ ⬛⬛🟨⬛⬛ 🟩🟩🟩🟩🟩

We have had similar Jonathan . Saw 30c on my truck a couple of times . I think Yorkshire had 34c .

Morning all . Back in the village after a couple of days in London . Liverpool street to be exact . Stiflingly hot . Happy Friday .

Good on you Jase. Good Morning Made it to the end of another one. Have fun.

Goooood morning Arbtalkers and happy Friday 🥳🥳🥳

Wordle 1,518 X/6 ⬜⬜⬜⬜⬜ ⬜🟩⬜⬜⬜ ⬜🟩🟨⬜⬜ ⬜🟩⬜⬜🟨 ⬜🟩⬜🟩⬜ ⬜🟩⬜🟩🟩

It's been very hot here for the last week or so. 29c today, a little warmer tomorrow, but looks like it's settling down into something a bit more seasonal mid-week. I'm honestly looking forward to it - I'm absolutely useless in this heat. Happiest when it's no more than about 15c, and perfectly content at well below freezing.

£1200 for what? What bunch of crooks was this?

The four principal orientations of manual rotating grabs on skidsteers are: Scorpion Battering ram Bulldozer Claw machine Amen.

Wordle 1,517 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟩⬜⬜ ⬜🟨🟩⬜⬜ ⬜⬜🟩🟩🟨 🟩🟩🟩🟩🟩

I'm not sure what went wrong with mine in the end (I loved them when they came out). It went to dealer for repair, was quoted £1200!!!! and when I said no was given it back in a box and carrier bag as it couldn't have been dismantled any more

The big sticks at the bottom are 20” dia and 10’ long. That’s pushing the WQ’s limits picking them end on. It will piss them all day side on.

Just got a new rope and thought I'd order a proper eye splice. A professional splice is a first for me, but it has me doubting: The eye itself feels pretty weak. It folds flat and feels a bit flimsy, like multiple core strands have been removed. The eye certainly looks like other eyes I've seen, even in professional splicing documentation, and it has proper sewing and markings. But it folds so flat that it makes me think of the "when to retire your rope" warning figures where the rope no longer has proper resistance to bending. I guess it's normal? It just doesn't feel intuitive that this splice has higher MBS than a figure 8... The picture shows the splice and another section of rope that I'm pinching with medium finger force. The rope is Courant Squir 2.0 11.5 mm.

Also, as Mick says, the smaller machines haven’t got the flow to run a flail or mulcher effectively. I might look at a quad flail with a donkey engine and reverse mount it though, £2k experiment!

The thing is Tom I decided I wanted a machine that I could use on as many jobs as possible. We can whistle up Telehandlers etc. on the big farm jobs, and the amount they can shift is unreal. My WQ is a dwarf in comparison, but it’s the best choice for me. You can’t get a Telehandler through a 3’ gate! Remember the grab adds about 85kg. Ball hitch on mine means it can take the chipper places that were a no-go before. Basically I’d say go for the biggest machine that will fit your business model. You’re welcome to come down and have a play whenever you want.