Jump to content

Log in or register to remove this advert

All Activity

This stream auto-updates

  1. Past hour
  2. bikewoo

    Beechley stables

    Clean chip only. NO GREEN.
  3. OK, sensible suggestion... This falls under duty of care, duty of care only kicks in when the tree owners are aware of the issue. Simply write them a letter stating that the tree species is inappropriate to be planted so close to property. clay soils etc and may cause property damage. They have a duty of care to ensure their trees don't cause damage to other people's property. Let them know that now that they have been made aware of the potential issue they or their insurance will be liable for any subsequent damage. Send letter 'signed for' delivery so you have proof they got the letter. Problems are not likely to happen for a few years so relax and let the tree grow. Prune any overhang back as necessary and if there are any structural issues in the future you have a legal footing and proof of their negligence in managing the tree.
  4. Today
  5. If petrol is acceptable, then I would go with a clone 2511 with a carving bar and 3/8" FC chain. I planned to do a comparison yesterday, against the Echo, but ran out of time. The clone runs significantly better for only slightly more weight, a better stop switch too. Fires up every pull and never cuts out between cuts/off throttle like the Echo does. A while back I did a comparason between the Makita uc029 40v and a Fakita 18v. While they both do the job, the Makita is significantly quicker and a 4ah battery lasts ages, even cutting 6" or bigger. Fakita pruning saw and Makita UC029.mp4 However I do not like the .325 speedcut nano chain, and the tensioner constantly loosens.
  6. It’s not my idea. There have been various up-tree rigging devices over the years, including a shrouded portawrap that prevents rope pinch. And there’s still a lot going for the layout. Hence why I suspect Matty’s safebloc strategy is pretty good.
  7. Shame it wasn't a woman, apparently they can multitask and safely keep their eye on the task as well as the camera.
  8. Malus

    Devon style

    Yes the banks here do tend to be a bit lower than down there, but we should have some tall ones too. This one's got a bit of clawdd too, stone faced earth bank much like Devon hedges? It's in pretty poor condition though and no grant towards restoration on this hedge.
  9. Malus

    Devon style

    How do you find the shear on the 2.6 tonner? Been thinking about getting one but keep questioning how much better it will be than a guy on the saw and one in the digger with a grab. Got and pics of it in action?
  10. All hopes now rest on Peter Jones coming through with a last minute offer.
  11. Mine too. I wish you all the very best with your idea Alex. But - I’m out.
  12. Other groundy, I got the video on my way back from brush dragging. Customer wants all the brush chipped into the woodland so theres about 6 big brush stacks ready for chipping about 30 meters away. He'll need to hire a tracked chipper for that. Theres quite a lot so I suggested 2 days hire, its about £450 from the local shop. The other option was drag it to the driveway and chip there, but the grass was turning to wet boggy mud and would have been destroyed by it.
  13. That makes sens though I'd never have guessed it.
  14. Well I agree with some of your analysis. Some of the above are just catalists, not causes. I would add to your list human nature (greed, envy, ego, inability to think critically and analytically and plain old selfishness) and 'The Establishment'. Especially the educational establishment, especially universities. Since when is education supposed to be political? And lastly the general unwillingness to engage in discussion and debate (which I think starts at school). By the way I have particular beef with schools as my boy was reported to the anti-terror radicalisation program (Prevent) by his school because his beliefs were not left enough. And our lovely government are going to roll out training for teachers specifically to help them spot non-left views! Of course they say they will train teachers to spot extreme right views, but if you are interested I can tell you what views my boy was reported for. In case you don't know, around 8000 referrals are made to Prevent each year, the majority of them schoolchildren. And the largest type of referral is for far right ideaology. And just to top off my winge about the education system; of those Prevent referrals 83% are deemed not to warrant any actual intervention - which of course sort of confirms that schools are seeing extreme radicalisation even when it doesn't exist. Or to put it another way, they are guilty of viewing everyone who doesn't see the world the way they do as a Nazi.
  15. Had too much fun in Wadebridge and surrounding areas in the past and got banned from a few establishments. One banned me and others twice!
  16. Who is the person intent on getting the action shot? I guess the customer took the video?
  17. Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    We have this used Bandit SG-40 tracked stump grinder, December 2022 model, with 215 hours from one owner. Finished in Alert Orange and fitted with a Revolution cutter wheel, this machine is ideal for professional tree care, landscaping, and forestry contractors. Reliable, compact, and easy to operate, it’s ready to tackle stumps of all sizes. Machine Details Tracked stump grinder – Bandit SG-40 December 2022 model One owner from new 215 hours 38hp Kohler EFI petrol engine Revolution cutter wheel Overall width: 29.5” – perfect for gated or narrow access Weight: 740kg Colour: Alert Orange Bandit SG-40 Summary The Bandit SG-40 is a compact, all-terrain tracked stump grinder designed for professional operators who need power, efficiency, and manoeuvrability. 3-position operator console gives clear visibility of grinding action Joystick-controlled travel and cutter wheel functions for smooth, efficient operation 38hp Kohler EFI engine delivers reliable starting, high torque, and consistent performance across a wide range of stumps Available with the Revolution 24-tooth wheel for fast, aggressive grinding

    £16,000

    Long Bennington, Nottinghamshire - GB

  18. Time Left: 6 days and 21 hours

    • FOR SALE
    • USED

    We have this used Bandit SG-40 stump grinder, a December 2022 model with just 147 hours from one owner from new. Finished in Alert Orange and fitted with the desirable Revolution cutter wheel, this machine represents a rare opportunity to secure a near-new, professional-grade stump grinder at excellent value. Machine Details Bandit SG-40 tracked stump grinder December 2022 build One owner from new 147 genuine hours 38hp Kohler EFI petrol engine Revolution cutter wheel Tracked chassis Overall width: 29.5” – ideal for gated access Weight: 740 kg Colour: Alert Orange About the SG-40 stump grinder The Bandit SG-40 is a powerful, compact tracked stump grinder built for professional use. Designed as an all-terrain machine, it delivers aggressive cutting performance, excellent manoeuvrability, and strong productivity in a narrow-access package. A 3-position operator control console provides outstanding visibility of the grinding action, while joystick-controlled travel and cutter functions ensure smooth, efficient operation. Powered by a 38hp Kohler EFI petrol engine, the SG-40 offers reliable starting, high torque, and consistent performance across a wide range of stump sizes.

    £17,000

    Long Bennington, Nottinghamshire - GB

  19. Sort of answered my own question there, by getting some spanners out and taking the fittings apart. Turns out one end is 3/8" BSP and the other (grab) end is 1/2" BSP. I think. And, in case it helps someone else, these fittings are all female; at one end (bottom of the picture) on mine there's a male to male adapter. Ordered some stuff. See if it fits.
  20. We could reverse our car to the shops, it’s do-able but going forward is just the better way! That’s my thoughts on this.
  21. Stein 16mm offcut from an Arbsurplus rope bag.
  22. Last chance saloon. Wordle 1,690 6/6 ⬛⬛🟩⬛⬛ ⬛⬛🟩⬛🟨 ⬛🟨🟨⬛⬛ ⬛🟨🟩🟨⬛ 🟨🟩🟩⬛⬛ 🟩🟩🟩🟩🟩
  23. Would try new ignition module, I had a 346xp play up last year would bog down and not run nice. After a lot of messing around with carb switched module with one out of another saw and it ran sweet.
  24. Theres two small ponds of stagnant smelly water and I dont fancy a swim, not too much space that way, and I dont have any winching kit. One log, got a slight nudge and rolled into the pond and I havent yet worked out how to retrieve it - could likely reach it with a sharp hook tool as its not too heavy. He did take some larger peices VID_20260131_105942.mp4
  25. Wordle 1,690 3/6 🟨⬜⬜⬜🟨 ⬜🟩🟩🟩⬜ 🟩🟩🟩🟩🟩
  26. Thanks for posting up the photos and details of this (somewhat harrowing!?) job/experience. I won't say anything here about the first chuck-and-run Climber... I am curious, though, to ask you if there wasn't space in the woodland (looking at your very first photo), to do a winched-felling of the entire tree (or maybe with a partially reduced canopy), down the slope -away from the court and photographer? If it was possible, would this not have simplified and speeded up the process (much cheaper!)? I'm guessing it's a 'no' -otherwise you would have done it already -but interesting to hear your response! 🤔
  27. Bit slow on the uptake today. Wordle 1,690 5/6* ⬜⬜⬜⬜⬜ ⬜⬜🟩⬜🟨 🟨⬜🟩⬜⬜ ⬜🟩🟩🟩⬜ 🟩🟩🟩🟩🟩
  1. Load more activity

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.