Jump to content

Log in or register to remove this advert

TheHungrySquirrel

Veteran Member
 View Profile  See their activity

  • Posts

    1,048

  • Joined

  • Last visited

 Content Type 

Everything posted by TheHungrySquirrel

  1. TheHungrySquirrel
    Semi chis for most everything and full chis for softwood
  2. TheHungrySquirrel
    Been trying this lately.
  3. TheHungrySquirrel
    Run those aswell but find the corners loose the edge quicker than stilhl
  4. TheHungrySquirrel
    I run a few 550s all on Sugi bars. Mainly run stihl 325 semi chis chains, stay sharp longer and the stihl seem to be tougher than others.
  5. TheHungrySquirrel
    Got spare days this month and next. Based in Ashford, happy to travel up to an hour. 30,31,38,39 Ground/climbing saws and kit Truck Message me or email [email protected]
  6. TheHungrySquirrel
    It's been really good. A few different dry times between the two but could have been the weather. Pulls in well and holds the rain off pretty well
  7. TheHungrySquirrel
    Where are you based??
  8. TheHungrySquirrel
    I have seen and used one and couldn't really find much difference to the pulley saver. I have the teufelberger but climb more srt so don't need them now.
  9. TheHungrySquirrel
    Yeah it's a 3.1 Just got the signs done.
  10. TheHungrySquirrel
    Treekit, fr Jones, Honeybros all got then
  11. TheHungrySquirrel
    Use the stihl ones now they last a lot longer.
  12. TheHungrySquirrel
    Without taking it apart that was the best I could do with just a drill. Trying to find a second hand one to fully gut and see what it runs like.
  13. TheHungrySquirrel
    Took some of it apart at the inlet side
  14. TheHungrySquirrel
    I thought you would be impressed 😜 going to track down the Dremel tomorrow and make it a little neater looking
  15. TheHungrySquirrel
    Got to be an award for the neatest job ever 😜
  16. TheHungrySquirrel
    I have an xsre on the top of mine. And like you bought the wrong one without the clip 😒 guessing an xsre in the rings should be fine as you say.
  17. TheHungrySquirrel
    It's working OK afterwards. I did it almost properly and removed the can, drilled then blew all the chips out b
  18. TheHungrySquirrel
    Petzl ovals or williams
  19. TheHungrySquirrel
    When I did my 38 we had a flip line and also a Prussik with a choked line around the stem as a back up. Top anchors for rescue was a sling with a pinto.
  20. TheHungrySquirrel
    Thanks for that, I can't do either as my welder a broken and so is my torch 😒 Ended up lifting the deflector and poking the drill in there like a mad man.
  21. TheHungrySquirrel
    I have figured out the how and where to modify but need a way to reseal the deflector after bending it up. Am I being silly in thinking I can solder it the same as I do gas and pipe fittings??
  22. TheHungrySquirrel
    Have you tried Milner off road? They have all the odd parts for most 4x4s
  23. TheHungrySquirrel
    Got a 3120 recently to mill with. It seems a good heavy duty saw, still getting it run in before starting to mill with it. Certainly plenty of oil on the bar in use
  24. TheHungrySquirrel
    All sorted great service from Cam at trust. Feel pretty happy with the insurance I have and a lot better service than my previous supplier.
  25. TheHungrySquirrel
    Anybody have any reviews on these?? Venom by rock machinery. 13hp with a b&s motor. To be used for reductions and smaller stuff until I can afford a real chipper. https://www.ebay.co.uk/itm/262546130836

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept