Jump to content

Log in or register to remove this advert

TheHungrySquirrel

Veteran Member
 View Profile  See their activity

  • Posts

    1,048

  • Joined

  • Last visited

 Content Type 

Everything posted by TheHungrySquirrel

  1. TheHungrySquirrel
    They are similar to a lathe in that the piece turns but it also oscillates. Normally a fixed cutting tool and will make multiple handles at once.
  2. TheHungrySquirrel
    Cheers for that. Easy enough to send them off for splicing?
  3. TheHungrySquirrel
    What Set up do you have with them? Think it's only treekit that have them spliced up. Also like the look of the shizll sling with a ring
  4. TheHungrySquirrel
    Anybody here using x rings and could they be used in place of a standard block??
  5. TheHungrySquirrel
    Nasty Connie row all out and 'logged' for the customer. Some people are so desperate for firewood they will burn anything?
  6. TheHungrySquirrel
    Axe handles are oval in shape so you would need a rotating duplicator rather than a lathe It's possible to turn ovals on a lathe freehand but requires remounting the timber three times during turning.
  7. TheHungrySquirrel
    372,muff mod and carb adjust. 8 pin on 16" and 7pin skip chain on a 24"
  8. TheHungrySquirrel
    Thanks for taking the time to put this together again. Let's hope it raises a bunch of money
  9. TheHungrySquirrel
    Tickets acquired
  10. TheHungrySquirrel
    150-540-550-372-3120 if it's bigger than a 42" then I call in Jesus 😂
  11. TheHungrySquirrel
    I have a marlow rope aswell as a Samson for mine. The Marlow is purple and black, run s fine although I prefer the 11.2mm Samson hot
  12. TheHungrySquirrel
    Big storm coming across the Atlantic. Bringing winds, rain and high swells.
  13. TheHungrySquirrel
    Can take log and chip
  14. TheHungrySquirrel
    Just gave mine a blow through with the airline and then a dose of oil to all the moving parts I could see. Even wiped the cable over and oiled it, I'm sure il regret that next time I use it 😒
  15. TheHungrySquirrel
    Toolstation? If not can you use 2 ton slings in a basket hitch to double the strength??
  16. TheHungrySquirrel
    Anyone have some shots of there catchers? Need to make one for my homemade back but trying to find some ideas.
  17. TheHungrySquirrel
    Currently got around 30 ton of timber to process. Happy to do it with saw and axe in my spare time. Am I better cutting on the stack even when the woods a mix of cord and Arb waste or would a portek style holder speed things up??
  18. TheHungrySquirrel
    One of my 550s is two years old with no problems. New plug and filters last year and it's good. Two new ones are also running fine, get it swapped for another as the weight between 50 and 60 is noticeable.
  19. TheHungrySquirrel
    Noticed the 3/8 058 full skip Oregon is in the wrong section.
  20. TheHungrySquirrel
    Tried ringing stiles and bates? Based in Dover but I know they will ship. Dave the owners your man to speak to.
  21. TheHungrySquirrel
    That saw doesn't get much use other than large and awkward trees, used a few wrap saws and love the extra position you can hold it in.
  22. TheHungrySquirrel
    Found some full wraps but can't find one with heated element, is it possible to swap the element and switchgear into the new one or do I risk loosing the heat?
  23. TheHungrySquirrel
    Completely forgot to look there. They have a 20 and 24 in the 3/8 and k095 fitment 😳 Not sure the side case needs to change as loads of people running 3/8 on these.
  24. TheHungrySquirrel
    Was that 20" 325 or 3/8? The new husky bars are a little better than old but still don't come anywhere near a Sugi
  25. TheHungrySquirrel
    Saw those but need it to be 3/8 058 to get the skip chain 😒 may have to save some more and buy another saw 😜

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept