Stubby
-
Posts
30,590 -
Joined
-
Last visited
-
Days Won
105
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by Stubby
-
McCulloch - was there ever a good one ?!
Stubby replied to TimberCutterDartmoor's topic in Chainsaws
Promac 610 ? -
It will be something similar to the photo . it will be somewhere on the uppermost flat surface of the tank .
-
Ok . Try the tank vent then . You never know . 🙂 Nothing to loose .
-
Could be low compression . Starts fine but when it heats up clearences open up to the point were it wont support combustion . Also could be blocked tank vent . Runs for a bit then pulls a vaccum in the tank . you can test for this by cracking open the tank cap as its about to die and see if it picks up .
-
Should make that an Olympic sport !
-
I see what you did there Les . Canter / horse , very good 😁
-
Nice one Dave , enjoy ! 👍
-
Road side and footpath trees have all been felled but in board stuff with no risk is still stood around here . Thousands of tons though .
-
Don't forget to send your bank details off David so they can put it in your account you lucky bugger ! 😁
-
When I win the Nigerian lotto i'm gonna buy that 👍
-
Ok .
-
I think its a bad idea not to . They are more efficient , cut faster and run cooler . Who wants to be trying to chase that back cut with a stock saw bogging and struggling ?
-
As Lord Melchet once said . " never poo poo another mans poo poo Black Adder " 👍
-
I stand re corrected Bill 😁
-
They are not actually brass . Its just plating . They are steel . I pick them up a whole bunch at a time with a telescopic magnetic stick .
-
I enjoy that series 👍
-
Mrs going srt kit advise please.
Stubby replied to Rob Thompson's topic in SRT (Single Rope Technique)
I thought it was his wife climbing .. Edit ..I see Mick has already claimed that one .. -
So you can't vac all the old oil out . Have to leave some dirty oil in the pump ?
-
Buds seem to be forming ok ...
-
I know you were pulling my pisser and , you know I was pulling your pisser . Pissers pulled all round ! 😄
-
Yes I know what you mean about " reading the log " . I have had it stall and a piece and jam under the cone and bend the shaft a tad . I think the cone is too high to be honest . If you look at tractor driven hycrack the cone is lower to the bed . This stopps stuff jamming under and lessens the tendancy to flip . Easy splitting stuff is quick as you like but gnarly stuff I use the hydraulic one . With a 30HP + tractor there is more torque and they just slowly chew through ugly stuff . Thats why I went for more power .
-
Ok . Do you find on tough stuff there is not enough torque and it can stall then you have to cut the log off the cone ?
-
I rest my case . The gate on the mould tool needs widening and the sprue runner milling with a ball nosed cutter up closer to the gate . ( like I suggested ) 🙂
-
Have a look at the Etesia Hydro 124 .
