Jump to content

Log in or register to remove this advert

woody paul

Veteran Member
  • Posts

    5,444
  • Joined

  • Last visited

Everything posted by woody paul

  1. Get 2 club hammers hold 1 against a flat of the nut and hit the opposite flat hard do this all the way round.
  2. Well Saïd Andy. À fire is the best way of getting rid of deceised timber.
  3. What do's your insurance say about fires, my one says not with in 30metres of roads/ building and put it out at night.
  4. 5 or 10 tonnes in a day, I've burnt twice or even four times this amount in 24 hours. Hows going to know what I've burnt in a day.
  5. All at the same time could be intresting.
  6. Seen MF 390 with roof mounted crane, as for country Tractors there just Ford base units underneath.
  7. Just seen à JCB 409 telescopic advertised looks like a smaller version of the TM 200.
  8. You mean a FRAZE Try Ashem crafts WR2 6NG
  9. Been looking at a 6 ton Farma with 3.8m crane any one useing one and do's it have enough reach to be practial.
  10. About the best on a35 mf would be a olé parminter side mounted or new out the back. Any post driver on a little tractor is better than a drival.
  11. Hi Brushcutter.Was thinking about 4.8metres reach. And when carting timber use agri-trailer.
  12. Hi after advice on weather to buy 3pl crane with long reach or trailer & crane with short reach. Have tractor with loader but got a couple of job to do where space is tight to shunt a loader about so was thinking of moving it by sitting and moving with crane to make less mess.????
  13. Any others got a Clumber spaniel
  14. Took 4 go's to get this little sod kept hooping from post to post.
  15. It did rain very hard when they were playing so they may of been better dressed like you said. But at leased they had little to dry.
  16. Switch on Tv and found beach volleyball on and just heared the best line yet, Serving from Downing street end .
  17. 1 acre in size, cheapest way is a good brush cutter with shredder blade fitted. To small to get a big tractor and flail as may only be an hours work.
  18. Had the same prob with Husky 250rx brush cutter plug had good spark took carb a part no prob's there, started stoped after it warmed up:confused1: took plug out spark ok. Thought sod it put new plug in and away we went. The plug broke down when it got warm, with taking it out cooled a little to show spark.So before strip change plug:thumbup:
  19. The amount of rain we had on friday afternoon you would be lucky here. Drove to southminster on saturday wheat looked nearly ready there.
  20. Kumo M/T tyres are the quietest tyre I know on the market. Belt landy down daul carrage way and you can't hear them. May be the answer will be fit big bore exhaust so they can't hear them
  21. Tirfor winch need's good anchor to work at full pulling power. Any one tried them TERRASAUR Blade in a disc cutter?.
  22. I've look at them but to wide at base for narrow paths. I use a TITAN REFORM Splayed base heavy duty 3. 3.48m closed, 5.62m standing, 7.96 extended great bit of kit only ladder I use bit of a swiss army knive:thumbup1:

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.