Jump to content

Log in or register to remove this advert

woody paul

Veteran Member
  • Posts

    5,734
  • Joined

  • Last visited

Everything posted by woody paul

  1. Bit of carving and a bit of red paint, turn it in to a post box:thumbup:
  2. I had a very similar problem turned out the ignition key was turning its self back to off a little that you could not see it. This was when you started to put wood through chipper, a spray of WD40 work a treat.
  3. Well it may be one of them, or it could be one of them other ones:confused1:, Picture will help a lot:thumbup:
  4. Chippenham farm sales if you want a Farma trailer at a good price.
  5. No. Contact bus opperater had a conifer to do some time ago customer said it was not a busy stop so I decided to do them between buses. Turned out one every 5 mins but best of all bus opperater inspector lived next door to job only found out when he came home and stood talking to him and he kept raising his hand to bus drivers them found out what he did but he said he was off duty so all well.
  6. Used oil & steel octapussy before what I like is the speed the move about your not standing around waiting to get near to the branch you what to cut off.
  7. Its probably your using wrong rope combo, tried a Knut the other day would not grip and work with Marlow but then tried Teufelberger gripped and worked as it should so keep at you will find whats best.
  8. Get customer to start it and use it in front of you may find out what the problem is.
  9. Bought a Auger Torque borer 5 years ago 1 of the best bits of kit I have bought. A mate used it the other week on his tractor came back and said that's some piece of kit.
  10. BH had given up on getting a reply. That's what I thought but in forestry I would not risk it would you.
  11. There are a lot of picture's on here of tractors being used for work not play without roll over protection how is this posible with HSE stricked guide lines?.
  12. Just read your other post, as it is a clear fell job a farwarded hired in or get you own timber trailer is the best bet. Skidding timber is time consuming with chains/winch tongs on back of tractor are quicker if just line thinning.
  13. Homelite XLTI chainsaw top handle | eBay Here you go complete saw
  14. From my memory you have the oil cap as they were black and the fuel cap were red. Will have a look around my sheds to see if one is still kicking around.
  15. That's what I mean. But why buy a 395 if you can put a 36" bar on a 576 ???
  16. Big dead Horse chestnuts may be hollow so no need to buy a bigger saw. Can't he just fit a longer bar with skip chain fitted to his 576.
  17. All 3 mixed together will burn well.
  18. One hell of a tail swing on it I bet.
  19. Debark with axe where felling. The bat willow fellers do it were trees are on flood plan near me to save a lot of sharpening.
  20. Years ago a cabinet makers in Ipswich wanted all they could get there hands on right down to 3 inch limbs was used in inlay on there tables I think.
  21. Have used cooper pegler cp15 for creosote work well with small fan nozzle.
  22. Not bad but what's he like with a bra.
  23. Poplar stumps, groove around top just inside cambium with chain saw plunge cut a bit deeper in places and then fill groove with SBK cover with plastic or thin slice of stump cut before grooving keeps weather and pets off.
  24. Anderson plug and long leads on land rover starts every thing when needed. So LAND ROVER best starter pack

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.