Jump to content

Log in or register to remove this advert

woody paul

Veteran Member
 View Profile  See their activity

  • Posts

    5,734

  • Joined

  • Last visited

 Content Type 

Everything posted by woody paul

  1. woody paul
    Farma 4.6 on a Fendt 304 about the same size as Ford 4000. I had to change lower mounting point to get it to go over cab. Use it 3pl mounted and on the front of trailer when I finish building it. Have used a old 3 ton trailer picture 1
  2. woody paul
    John Deere motto Run like a deer didn't run fast enough that time.
  3. woody paul
    You say its a bit wollowy do you mean it sways and leans on cornering. Looking at the pictures of truck body is mounted to high which is a problem with a lot of LR tippers. Good shocks as well as springs anti-rollbar will help.
  4. woody paul
    Great stuff nothing like a bit of control felling:thumbup1: All that kit and they still got a bloke with a hand held rake.
  5. woody paul
    just looked 10W-30 or 10W-40 my engine manual says
  6. woody paul
    TRAILER - 2000LB | eBay ANY GOOD
  7. woody paul
    Why chequer plate alley just got flat on my ifor. Westbroom trailer at Colchester can cut fold and weld alley if you need.
  8. woody paul
    Thats a barber chair. Stopped cutting to soon, heared the first crack and stopped may be.
  9. woody paul
    Nice job. But how is the twit that built the stable to close in the first place:thumbdown:.
  10. woody paul
    How would a Danish pie cut help when most of the barber chairs happen when the gob close. Big wide open gob like when felling down hill also helps. As above keep cutting.
  11. woody paul
    Ash Willow and Sweet chestnut is bad this time of year. Bore cut the hinge helps is what I have found.
  12. woody paul
    The lad was carrying out a job to keep drivers safe, so hitting him with a car is way out of order. Hitting the car means he may have left his finger prints on it which means there was contact. Report it to police see what they say, if you did get the reg of car give that to them may be the driver has a record for the same at some point or if he does it again to some one next time the lad in the road may not be as well off as yours.
  13. woody paul
    That what I thought but it was all butts no cordwood .
  14. woody paul

    Alder..

    woody paul posted a topic in General chat

    Driving to a Job today saw a stack of alder lengths were about 4m x 15-18inch any one know what this would be used for.
  15. woody paul
    Do work for someone with one they have large garden saves a lot of time moving wood gardener is a good driver which makes a difference. If hired out with operater only IMO.
  16. woody paul
    Were they looking for Cat burglars and had a tip off some were about:laugh1:
  17. woody paul
    Like any thing on tracks put ply down for turning point then no scuff marks. It's all down to driver not machine.
  18. woody paul
    ALDI - Thursday Specials Buys 21st March 2013 here are ALDI again
  19. woody paul
    Good old gaffer tape.
  20. woody paul
    Ms 150 not that old then, so I would go back to shop asap.
  21. woody paul
    Is that a lump of burr above you in picture one. The lump of burr on trunk looks a good size.
  22. woody paul
    Just a thought it may be a late 1 as my old boss had a 621 which was an early 1 that did not have rear hand guard. It was ex forestry commission then a forestry contractor then him. Replaced it with a 630 half the saw he all ways said.
  23. woody paul
    60cc could be a late 621.
  24. woody paul
    Is there enough room to use a 27m picker. And when you reach across you will have to cut below basket no easy or are you having two in basket and cut with power pruner other hold and through.
  25. woody paul
    27m Picker bit of over kill if finished height top of pole.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.