Breezeblock
-
Posts
2,312 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by Breezeblock
-
fixed tooth hardfaced on their noses staggered in pairs
-
that looks like a scam
-
its a converted tracked dumper camisa i think and the attachments were all made in-house
-
managed to get our mini mulcher out on a clearance job at a petrol station very happy with the results had a few issues with drive belts needed a new set after a few hours work but we can live with that at £7 a set it aint gonna break the bank
-
look on flowtechs website on ebay they have pumps and in the description it tells you what hp match they are there is a formula but i can't remember it
-
if its short stuff vertical if its long stuff horizontal
-
the green teeth are a doodle to sharpen and they should fit straight onto a cutter wheel that has been fitted with finger teeth make sure you go for genuine green teeth as some of the other ones that you get will fit but the heads are a smaller did and it causes the nose of the shank to wear thin .on our grinder which is only 28 hp we reduced it down to 4 pairs of shanks set with 2 straight then two angled at opposite sides for balance and it cuts very well
-
have the y got there full range of chippers and grinders ce certified
-
save yourself the hassle and change to green teeth they should fit straight on if your holes are 1 1/2 spacing with a 5/8 hole
-
if it does reverse them
-
water in the fuel would be my bet white smoke generally means water or bad fuel timing . change the fuel filter make sure that the tanks clean and make sure its getting full throttle start with the basics
-
be a bit more specific is it for production or just a small amount of logs for yourself is it arbwaste or straight grain stuff for a kick off
-
are the bar noses for stihl rollomatic bars available in uk or will the oregon ones fit . the sprocket on ours parted company with the bar for some reason cheers
-
thats pretty bloody quick a conveyor on that and it would be even better
-
15" bar and 8 tooth rim on 325
-
you beat me to it
-
without proper pics its impossible to tell
-
tracked barrows hold there money very well i waited about 4 month scanning ebay before i finally got one just shy of 2k but had to go to birmingham to collect it
-
by the time you buy a tracked barrow and a chipper you might not be that far away from buying a proper one there was 1 on ebay last night for about 6k
-
in the market for a kombi type tool... Which one?
Breezeblock replied to Bigfellers's topic in Chainsaws
echo ppt 265 simples -
thats a long trek from your depot how long will that take 8-9 hrs drive
-
what was the song at 11.30
-
build up the inside of it with concrete cheap as chips
-
and the xmas special was crap
-
ours is an eta and I'm quite impressed with that so far
