elfinwood saws
-
Posts
1,408 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by elfinwood saws
-
I,m looking for work for a full size harvester and forwarder in the north east area, clearfell or thinning work.
-
A litre of bottled water costs more than a litre of milk! and people buy it!
-
used a landrover wheelbrace heated up with the gas axe, can do all 4 sides of the bag with one heating of the wheelbrace, you get sick after 40 bags or so!
-
I don,t know what it started life as? but it now has 4000cc 4 cylinder diesel vario engine and a 2 inch body lift.
-
A mate of mine turn up for some logs today in this
-
burn it on my stove no problem with a bed of logs underneath.
-
here is a photo of my 4.5 ton 360 with it,s thumb folded back in the stowed possition. Just having the thumb makes a 360 a lot more versatile .
-
leyland 262 or 272 excellent starters and very good on fuel and simple to work on.
-
Say thank you for the 25 pounds and say sorry for letting them down!
-
Hi cutting softwood, going to have about 500 ton for sale in a couple of weeks, located in the Durham area.
-
PM sent cheers.
-
any vintage tractor enthusiasts our photos
elfinwood saws replied to Joy Yeomans's topic in The Lounge
i did wonder as well -
any body know anything about LR TD5 engins
elfinwood saws replied to splinters's topic in General chat
could be fuel filter housing, where the feed and return connect. The alloy casting rots where the copper washers fit. -
Saw this type of thing on a posch processor at Wilsons open day, took a few photos of it with the intension making one for my processor. It,s a nice simple bit of kit that really does work. If you angle the waste chute at a steeper angle and fit another grate in the waste chute, small stuff will drop through in to a dumpy or bin and the kindling will drop off the end of the chute in to a separate dumpy or bin.
-
Here it is!
-
I,d just like to point out this quote was not from Billy Barden it was someone in the Durham area.
-
1000 pound a day, 25ton an hour, thats what we,ve been quoted.
-
Processor - Circular Saw vs Chainsaw ???
elfinwood saws replied to TimberCutterDartmoor's topic in Firewood forum
-
Same here in County Durham, selling more now than i did in winter!
-
:thumbup:
-
I,ve got both 660 and 650 and i cant tell the difference between them other than the 650 pulls better at lower revs, If you want more power fit a aftermarket 660 barrel and piston they are about 50 quid or fit a big bore kit 56mm they are about 65quid and are about 97cc.
-
Make sure the air filter is clean? is it burning oil? turn the fuel screw down on the injector pump, could be any of these.
-
Still looking!
-
WHY?
-
As the weather has been so bad of late, i,ve spent some time in my workshop and found a ms660 that i had forgot about! So i thought i would rebuild it and use it, it needs piston and rings and exhaust and top covers i,ve got these parts on order but i,m stuck for a carb, has anyone got a carb? 064/066 ms650/ms660 a carb off any of these will do, Cheers Mark.
