Peter
-
Posts
9,849 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by Peter
-
Surely you mean the contractor's insurance? The climber doesn't need any insurance, other than maybe personal accident cover. Every crane driver/climber combo must have worked together for the first time on something, what would you recommend for a first job?
-
Hi JON Pete not so sunny here Cambs hard cord wood 500 mm plus here pricey too large biomass less work surely living has be made give up maybe? What do you all think?
-
I wouldn't use a pulley if you can avoid it. Friction at the anchor point is twice as useful as friction generated by taking wraps around the trunk. Definitely avoid the topping strops!
-
Stick to natural crotch rigging and trunk wraps and you'll be fine. It'll be like going back in time 20 years!
-
Can't really find any proper info on it. What I would want to know is the melting point, as I would expect it to be very low. Polypropylene ropes do not work well with metal lowering devices for this reason. If you just want a big fat cheap rope for pulling trees out of swamps then it's probably ideal, but for any application that involves friction it's basically a ticking bomb.
-
Normally it means both parties sit down and discuss the issue at hand, to wit, pay, and reach a mutually agreeable decision.
-
Thanks! Not quite, the hierachy is avoidance of work at height, then MEWP, then climbing.
-
I think the large area of dead in pic 3 is unrelated to the fungus, probably an old machine strike. The brackets at the base of the tree were at least 3 feet across, so it had been at work for some time. It did crumple a lot on impact, so definately something going on further up.
-
No, but the decay didn't extend as far into the stem as I expected, I thought the whole diameter of the decayed part at the front would be mush, but everything except the bit that fell out was pretty sound.
-
Hard to say really, I think once the tree has started to break the hinge fibres they pretty much all fall at the same speed. There wasnt a lot of live wood in the hinge though.
-
If the mewp is specified as the rescue method, and it can access the whole canopy, what is your justification for using a climber to carry out the work?
-
Field side, as was the decay. Looked fine from road side, so much so that it was deadwooded roadside without the decay being spotted..... Weighted towards the road.
-
Ash fell.
-
Gunnera manicata can get up to 6 feet, leaves usually 3-4 feet across, but the flower spikes are normally shorter. It has round stems with short spikes on. It is also frost tender, so the crown needs covering up with the cut leaves in autumn. Rheum palmatum looks just like the edible rhubarb, only bigger. There is also a purple tinged leaf variety, called 'Atrosanguineum'. There are other species of Gunnera in cultivation, but they are quite unusual.
-
If all else fails, buy a Big Shot!
-
Practise, practise and more practise. I use a permanent loop tied in the line, on one finger, and swing the bag to my right. Any technique is ok though, find one you like and take some time outside of work to get it right.
-
Ariel rescue- THE method for rapid ascent.
Peter replied to Tony Croft aka hamadryad's topic in Climbers talk
Cool, I'll see you there too! I'll probably be footlocking in to the tree, although I have no idea what the scenario is will be. When you have 5 minutes ticking away, it really shows up any flaws in your system, so whatever you are going to use make sure you are really really familiar with it beforehand, you need to be able to set it up with your eyes closed! -
TW 190 seem to munch conifer quite happily, as long as the knives are nice and sharp.
-
Looks well smart!
-
Dont bother with the chest harness at all, just link the croll to the ring on the bridge, and link the top of the croll to the top handled ascender so it gets towed up the rope when you advance the handled ascender. Just make sure you don't get too much slack between the harness and croll.
-
I don't ring much stuff up these days! Although 70ccs and a really sharp chain always do the job for any sub 20" material.
-
Found woodpecker chicks in a tree today, stopped above the nest, and when we left site I observed a parent re-entering the nest site.
-
Depends how patient you are! I want 70cc for ringing up with a 20 inch bar.
-
Did you ever get to visit Europes tallest beeches? I quite fancy that, as long as I can climb them!
-
I take it Stihl bars are acceptable though?
