Jump to content

Log in or register to remove this advert

aspenarb

Veteran Member
 View Profile  See their activity

  • Posts

    4,736

  • Joined

  • Last visited

  • Days Won

    14

 Content Type 

Everything posted by aspenarb

  1. aspenarb
    Its very easy on any landy to fit a lockable battery switch and install a fuel valve under the drivers seat. That wont be going anywhere unless its towed:) Bob http://arbtalk.co.uk/forum/attachment.php?attachmentid=193184&stc=1&d=1447488275http://arbtalk.co.uk/forum/attachment.php?attachmentid=193185&stc=1&d=1447488412
  2. aspenarb
    The DPF is removed and bypassed. I dont think its an option on such a new vehicle but if it was a few years down the road I would tear it off and fit the gizmo. Bob
  3. aspenarb
    Fit one of these gadgets and forget about it. They do work. ISUZU DPD Emulator - Expedition Portal Bob
  4. aspenarb
    This problem is quite well documented, Isuzu have buried their head in the sand which is what they did when they had problems with the old trooper 3ltr engine. If its on lease purchase I would park it up on the forecourt where it came from and tell them payments will be stopped until its repaired. Bob
  5. aspenarb
    Been bottling it for a while now
  6. aspenarb
    keybord spatt tee onmate thanx mate:thumbup1::thumbup1: rit mes hear :thumbdown: som meat yewr EGGS mate nise won thanx:lol: BBo
  7. aspenarb
    Same here Matty, I reckon it was only minutes away from going down the inlet pipe and doing battle with the turbo:thumbdown: Bob
  8. aspenarb
    Bought an ex lease transit with full service history, it was due its next service and this is the air filter I took out of it. A lot to be said for doing your own services.
  9. aspenarb
    Enough for a front loader on the kubota T but needs a pto pump running for the backhoe. Bob
  10. aspenarb
    Great little gadgets:001_smile: New Holland and a Kubota with backhoe and front loader. New holland runs one meter wide flail topper,stone burier and rotavator.
  11. aspenarb
    You can dump it here if you get stuck Al Bob
  12. aspenarb
    Not all Chinese products are junk, many are made on state of the art production lines to exacting standards. The problem is there are also sweat shops knocking out utter rubbish with unskilled labour to very poor standards in mud huts . They have not become manufacturing giants for nothing and many products we believe to be European are made there as sub assemblies. " Made in Britain" or wherever can be misleading,it may well have parts made in China within its build. Badge engineering = Caveat Emptor. Bob
  13. aspenarb
    There a bit down in tread now but the BFG muds have been on the cherry picker for about ten years, considering the thing is three ton I dont think they have done bad, its also worked in some crap in its time and I cant remember having to pull it out.
  14. aspenarb
    Money well spent when you consider the cost of new Gray, that wont take long to claw that back. Its must hold 6 cube + . Bob
  15. aspenarb
    I think they switched it off and turned it upside down looking for your lost thread Jon. Bob
  16. aspenarb
    I like that rack/lightbar combo Mat,very well thought out . Men in sheds Bob
  17. aspenarb
    I have been on the course and understand him ( ish) Here are some of them Jon http://arbtalk.co.uk/forum/general-chat/76494-mendi-plogs.html http://arbtalk.co.uk/forum/general-chat/73044-mendiplogs-inbox-full-mate.html http://arbtalk.co.uk/forum/lounge/66825-jonp-your-inbox-full-full-chip-mate.html http://arbtalk.co.uk/forum/general-chat/78797-mendiplogs.html
  18. aspenarb

    Overloaded

    aspenarb replied to Stihlben's topic in Arb-Trucks

    Probably ok then if he leaves his flask at home. Bob
  19. aspenarb
    A full bag of logs at 4 meters and 1250kg at the side of the trailer Jon. Bob
  20. aspenarb
    Here you go Jon clock this for a trailer . My mate popped in today with his triaxle IW with a crane fitted. He has just got it and wonders how he managed without one.
  21. aspenarb
    A lot to do with the "contractor rates" Stubby and the expected KM`s they have to cover. On some of the posh estates around here they are allowed the time and they are cut to perfection. Bob
  22. aspenarb
    I enjoyed that , I do like that little tracked wizzer. Bob
  23. aspenarb
    We have them for 3ton to 20ton machines. 2`to 5` cutters The small one will cope with hedges, unless the machine is fitted with a powerpack you are juggling the available hydraulics between the machine and the head. It takes a skilled operator to get the best out of these heads. Its not as easy as it looks. Bob PM me if you need it.
  24. aspenarb
    Its rough in Ireland [ame] [/ame]
  25. aspenarb
    One of the trucks in the yard has weighing equipment built in ( ex council). It has an out of date calibration cert stuck on it so its feasible the weighing could be done on delivery with a weight ticket. Bob

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.