Jump to content

Log in or register to remove this advert

Joy Yeomans

Veteran Member
  • Posts

    1,677
  • Joined

  • Last visited

Everything posted by Joy Yeomans

  1. we sometimes get chestnut that we could put in a kiln, you say small kiln out of an oil drum - i may sound daft but is it that simple - just fill tightly your oil drum, drill holes in bottm which becomes top? tip upside down and seal around with sand, stand on tiles? is this right? as would like to give it a go
  2. stop at the caravan site at chatsworth ? we visit chatsworth area regular just on our doorstep and not to far to go if need to get backto the yard and even took the caravan up in february school holidays, brill for kids, eyams well worth a visit.,as is bakewell and buxton - looks like you had good weather, we woke up to 3ft of snow when we took the caravan in feb - was well good towing it back down to ashbourne - some of your pics look like they were taken in same spot as ours !
  3. chatsworth way?
  4. bump this thread - discounts available as usual for large orders (1500 nets +) give us a ring, we can always meet your requirements
  5. half a load? - chipper broke down , landy gave up the ghost - started big burn up?
  6. did you give up after first load and left it as a habitat log?
  7. what about the famous tree versus chainsaw - i think chainsaw wins
  8. im too old for festivals - but looking forward to visiting glastonbury with the kids in the summer holidays - hoping to pick up some spiritual guidance:lol: and our old crystals are worn out:lol:
  9. OMG - i dont believe it - and you call yourself a firewood man! better send some pledge over for you dave - are you turning all Tony Blackburn on us all
  10. how do you mean?
  11. thats what sycamore and h/chestnut go like anyway tbh - if you left it in the cord wood, youd find that when you cut it you get a fine black power dust from the drying of the wood - those logs look fine - looking well seasoned, splitting at ends and will burn just great - you will never get them to look nice and clean - thats the nature of that wood. sycamore is great firewood but doesnt look particulary clean looking, beech will go a nice dark colour once seasoned, birch can go over if not sold just at the precise time, ash stays nice and clean looking tbh thats why we dont fell alot chestnut, just for the shear length of time to dry on a commercial basis - we stick with beech, ash, oak, birch then sycamore in that order - only use the chestnuts if we fell in part of our tree surgery basis and then probably only give it to relatives etc as it smoulders weve found. dont worry dave youve done everything fine
  12. youd think so r/john but weve just come back from our local agricultural show, where we had a stand promoting our wood and trying to promote softwood alongside hardwood - the stove installers have really made it hard to push s/wood as theyve given it such a bad name to the joe public. we had such negative feedback from potential customers for softwood they only want hardwood - which weve got - dont get me wrong - but like you say r/john were going to have to go onto this at some point as hardwoods getting harder to source at a competative price - or it makes switching that oil or gas central heating back on cheaper than firing up your stove
  13. i always think a website should be informative , its nice to read some background about the business/people and read friendly- but masses of writing can be off putting, nice pics always add interest, keep simple to start and then can add to it, is there another company similar to yours you could see what headings/pages they run and get some ideas?
  14. could be the stress control playing up ?
  15. ic, do you use the mesh cubic nets, that fit into the frame, like a big log net bag? with the pull cord around the top? weve got those also - logs dry really well in them
  16. they must be smallish bags - builders bags? - as believe me, you couldnt move our drying net bags each one is shaken with the loadall as its filled to really pack them in - even when dry you wouldnt even move it with three or four people
  17. not found any that are uv stable, will leave these uncovered for a month say to dry out then will cover with sheets to save the nets deteriorating, then once dried out thoroughly we cover with pallet covers before backend, but alot of ours goes straight out to customers who store undercover anyway
  18. had a R reg old ldv tipper, bloomin brill truck, only got rid as it was really tired and wanted some work on it and had a few probs getting bits for it - but way cheaper on fuel costs compared to the 05 transit crewcab weve got now - but we love the ford now, plenty more poke, a bit higher geared than the old ldv and much more comfy for that longer work day - wouldnt swop the transit now - brilliant trucks - get a 115 engine
  19. wow - well done for having that camera about - what a privilage to see something like that so close
  20. tbh mike, never put it all in a pile, as dont have a "push wall" to load up with the loadall, so always either left the cord wood to dry in a stack or cut into these nets and also use cubic metre nets that fit a frame, they are brill but can only really use them once
  21. yes your right dave, we will space them when they start going out, as we sell alot of this whats cut now as "part seasoned", then when re filling the bags later on, say july time wewill space them so that the wood does season thatmuch quicker for october onwards - always have about 200 nets + at a time - time and space permitting
  22. left uncovered through the summer the pallets then covered backend if not sold before with pallet covers, the bulk nets just lef outside - once seasoned the wind keeps them dry
  23. not had a problem yet, touch wood, 24t gross fully loaded and not had a problem all winter. charlie - can always put the hay gormers on the small green trailer if your wanting to cart small bales - can get about 120 on that fully loaded

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.