All Activity
- Past hour
-
That's appalling. Whole sentence is crap. If I didn't know who Husky were, I'd shut the window for being tingtong. I weep when I see things like that. They've been making stuff since 1689. All that brand goodwill, teetering on the edge of worthlessness for a moment's laziness/crassness.
-
Christ here we are again running the saw with no bar and chain, I strongly advise you do not do that, on the over run they can, and will spin off, once away from the drum you have two shoes one spring and a spider flying through the air at speed. Yes clean the bar delivery holes, next you need to remove the clutch and check the oil pump gear behind, then remove the oil pick up pipe and filter and clean, has this been running with bio oil?
-
too much indian bolswick in the oil pump? is it your saw, or one you saw in somebodies shed and decided to claim it as they haven't used it for a while.
-
-
DCS9010 always came with 28" solid nose bar, although I bought secondhand and it was knackered already so never used it. In my mind solid nose used to be more common, maybe sprocket noses weren't as reliable on higher power saws?
-
Good luck with that one, looking at the photo.
-
Resorted to guessing different letters. Still clueless. Wordle 1,516 4/6 🟨⬜🟨⬜🟨 🟨🟨⬜🟨🟩 🟨⬜🟩🟨🟩 🟩🟩🟩🟩🟩
-
All these cheap skid steer loaders about…….
Stihl123 replied to Treetom15's topic in Large equipment
watch out for Avants i have a 2017 Avant 520 1700 hrs when i brought it, i paid just over £8k plus VAT no attachments and no, it wasn't stolen - Today
-
Morning all, Feeling tired after yesterday’s efforts in the heat, but job went well. Hedges today.
-
The obvious is to clean out the bar groove and oil inlet hole . Start the without bar and chain . see if any oil comes out of the out let . Careful how you rev the saw , don't want the clutch spinning off if its a thread on one . The hard to start when hot could be low compression . the 135 is not a pro saw so maybe not worth spending too much money on it .
-
Wordle 1,516 5/6 ⬛🟨⬛🟨⬛ 🟨⬛🟨🟨🟩 🟨⬛🟩🟨🟩 ⬛🟩🟩⬛🟩 🟩🟩🟩🟩🟩
-
Morning all . Up late after going to Fratton Park to watch the blues loose 2--1 to Reading in a cup match . To be fair we did not put out a full strength side but then nor did they . They were just better . One of our new signings on the left wing was shit .
-
Wordle 1,516 5/6 ⬜⬜🟨⬜🟨 ⬜🟩⬜🟩⬜ ⬜🟩⬜🟩⬜ 🟨🟩🟩🟩⬜ 🟩🟩🟩🟩🟩
-
Up early for no reason! Walk up Golden Cap with the old folk maybe, or just around Landon Wood! Going to be another hot one! Be safe folks! Logger, Rhythm.
-
Misty Good Morning.
-
Wordle 1,516 3/6 ⬜🟨🟨⬜⬜ 🟨🟩🟩🟩⬜ 🟩🟩🟩🟩🟩
-
Wordle 1,516 4/6 ⬜⬜⬜⬜🟨 ⬜🟨🟨⬜⬜ ⬜🟩⬜🟨⬜ 🟩🟩🟩🟩🟩 Happy with that.
-
Sorry for the late reply. Thanks gents thought it was strange with no sprocket. Will have to get a sprocket bar next time. Don’t think it will take long to wear as generates a lot of heat.
-
Good morning Arbtalkers 😊
-
Good Misty Morning again. Restless night again too. Have a steady one. Hump-day and all.
-
Wordle 1,516 X/6 ⬜⬜⬜🟨⬜ 🟨🟩⬜⬜⬜ ⬜🟩🟨⬜⬜ ⬜🟩⬜⬜🟩 ⬜🟩⬜⬜🟩 🟨🟩⬜⬜🟩
-
best way of removing tree and stumps
Mick Dempsey replied to Hog a Log Hogson's topic in General chat
This guy is a time waster/wind up merchant. Do yourselves a favour and ignore him. - Yesterday
-
First time stating the saw up since about 10 years ago. So dont remember much But it runs well, apart from hard to start hot and there is no oil on the chain what so ever! Yes the oil tank is full. Where do I start look please? Thanks PS 14" Husqvarna 135
-
best way of removing tree and stumps
Hog a Log Hogson replied to Hog a Log Hogson's topic in General chat
So you are happy burning old tyres, but not happy with me occupying waste deralict land -
best way of removing tree and stumps
Hog a Log Hogson replied to Hog a Log Hogson's topic in General chat
So what will they do if they do indeed find you squatting there land? Do you have reference to this statue please?