Baldbloke

Great stuff. Just clamp it up for 24hrs.

I’m doing a fair bit of dead Elm at the moment. Some of the stands that have several trunks coming from ground level have a tendency of coming away from the ground if a hangers attached and needs a pull. I wouldn’t consider climbing one of those. Single trunked bigger trees on better drained soil generally seem ok. I find the biggest danger from doing a fell from ground level is dead limbs breaking off as the main trunk starts to move.

I just use new cheap engine oil when its cold and save chain oil for the summer. Never had a problem with the rate turned up. Years ago in the winter we even used carefully filtered burst oil (used sump/axle/gearbox oil) for our Stihls without any issues. Not so keen on trying that now (as saws seem less robust and I hear Husky's are even fussier) but perfectly happy using 10/40 for bars and chains when the temperatures drops and oil gets thicker. As someone else said, are you sure the oilways to the bar are clear?

Our local farmers aren’t the best at respecting anything that impacts on their farming interests. Our property and the churchyard are the only immediate areas with mature trees. Some farmers life’s work appears to be to remove every tree possible

If you were my neighbouring farmer you just use your Matbro to break off the limb by tearing it off at the trunk. I Don’t know about south of border but believe you can trim off boughs directly above your ground. Neatly would be good to limit disease prospects.

You’re right, but Some dogs are better at finding them than others. Think it’s those with experience. Woodcock also have great camouflage compared to a cock pheasant so partly rely on that and sometimes lift at your feet.

To save the birds or to save the beaters??

Correct, as some have already said that some are resident, and some begin a migration to here during late October through November by usually using moonlight and favourable winds for their journey. As they need to use their beaks to get into the soil for food, our winter climate is preferable to where they have come from which can be frozen up over winter. I used to be a fishing ghillie up here in Scotland and saw resident birds roding (?) during the summer. It appeared to be birds following a flying circuit of their preferred area, or perhaps it was male birds advertising for a mate or ensuring other males didn't trespass. 30 odd years ago I did a couple of years in the oil industry and it was fairly common at this time of year to see exhausted woodcock and other birds drawn to the platforms lights and taking a rest. You wonder how many get too exhausted due to wind change or just getting lost and falling into the sea. I don't shoot them either now, although in the past with numerous numbers a left and right was common. Never applied for the tie though. The oddest sight I ever saw was a lone stork in Angus Scotland after heavy winds. It flew at an altitude that a heron could only dream of. Another oddity was several thousand pink flamingos in Forfar loch maybe 20 years ago. God knows where they came from!

draining rod with a corkscrew attachment??

I believe the 365 has been on offer for a number of years I can recommend the 365 Special as I had one as an estate work saw for 5 years and then bought another new (on offer) and still have it as one as my larger saws. Quite a bit heavier than the Stihl MS 260/261 though which is more easily used in real world felling of smaller trees for old fucks like me. 70cc for the Husky and 50 cc for the Stihl I also understand the 365 special, 365XP and another model using the 365 designation are all slightly different either in bore size,stroke, or carb type. Some are more tuneable than others. I believe the special is best left as standard as less tuneable. Good reliable saw none the less.

I hadn’t done any tickets until about 18 years ago. The estate I then worked for put me through small trees and cross cutting course( whatever the no is). I’d previously been cutting on a self employed basis as well as for another estate that wasn’t so bothered by health and safety issues. Due to unusual circumstances I had to borrow a blunt saw from work and remember the unimpressed instructor giving me a bollocking for hurriedly doing a sharpen and raker reduction freehand in the back of a Defender so the saw was usable. I also remember the estate mechanic wag (who had supplied the borrowed saw) provided an enormous Husky with a 24” bar. Really handy for the practical bit in amongst the thinnings ? There was an ex army guy there who was a bit of a halfwit who got passed[emoji15] The rest of us couldn’t believe it as he was totally clueless. I later heard he had a serious chainsaw accident at work.... The danger is there’s always eBay/supermarket saws and stupid people who haven’t been either trained or had a good mentor beforehand. Being a stubborn grumpy fuck and having dealt with a few thousand red and roe deer during my lifetime I still refuse to entertain doing an approved deer course. [emoji3]

Probably a silly question, but does the MS 260 suffer from the same issue? Or does greasing up the needle roller regularly eradicate this problem?

I do realise that the concrete and manufacturing involved in a wind turbine makes its green credentials suspect, but would like to be able to afford an electric car in order to charge it off our turbine. No tax, and few running costs, but just too expensive to justify a purchase at the moment. I thought all new housing was supposed to show its green credentials by being super insulated and have panels in place?

Think my 200 year old house was built long before all these jobsworth wankers came into being

Although I have an obsession with fast cars/trucks etc I’d willingly buy and run an electric vehicle if they were affordable As to the budget. Someone’s already worked out that 50% of income tax relief has been offset by bigger NI contributions. Otherwise looks fairly harmless for a budget

Is that with the scale still over the weld?[emoji12] I’m sure it’s plenty strong enough though[emoji1303]

I was always told to release the stump first to avoid being catapulted upwards[emoji3]

Hi, any parts for the backpack Stihl Strimmers? I’m after the flexi-drive for mine if you have such a thing? Just the inner required but would take anything related in addition

My chains get used until the teeth are accross the cutting face are barely there. I still keep them for low stump work and riverbanks. A proficient sharpener should get an equally good cut until the chain is down toward its bones. I too have experimented in the past by using smaller files for the last gasp to avoid filing into the side plates?

Concerned about being shouted shouted down as yet to do any milling... Merely being an engineer and cutter. Surely a tilt down to zero % must add more pressure onto a chain than giving the cutting edge a leading in point? Am I being thick here, or doesn’t a lead in with more of an angle to the cutting edge equal less pressure onto the chain rather than the entire cutting edge hitting the work simultaneously, rather than the point being the initial insert into the work? Although the picture of your chain shows the rakers as being untouched, I can only ask whether taking down the rakers too much on another chain along with too flat an angle on the cutting teeth has contributed to the breaks?

Nerly broadsiding an old dear because she had indicated left, but then turned right in front of me as I overtook. Very near miss ?

10 years later I did. It cost £12500 by then.?

£18.60 a week for me at 16[emoji3]

1. Congratulate him on his stance, remind the audience of the original questions that were voted on, ("Remain a member of the European Union" "Leave the European Union") and ask him what the fuck is going on. 2. When he takes over the top slot ask if it's possible to organise a parachute drop for Corbyn into Syria.

And once you do get taken on in forestry don't expect to make good money from the off, unless you are lucky enough to get into big timber clearfell. First thinnings and tight woodland as a beginner can equal small tonnage along with poor earnings. As someone else said, if you hang in there without injuries you'll become fitter than ever?