Jump to content

Log in or register to remove this advert

Dan Maynard

Veteran Member
 View Profile  See their activity

  • Posts

    4,451

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Dan Maynard

  1. Dan Maynard
    Ah not sure I said that, the broken cable can be a severe hazard but at least the thing you're winching won't fall to the ground. Overall less hazardous to winch a truck across a muddy field than to winch it up into the air.
  2. Dan Maynard
    Having used both Predator 360 and Carlton with one wheel brake, I reckon up to about 8 inch it doesn't make too much difference as the unbraked wheel is out of the pile of debris and can roll back and forth ok. Once the stump gets bigger, or you have long roots to chase out on a cherry, something like that so that the wheels start getting in the pile or even in the hole, then the turntable becomes a massive massive advantage.
  3. Dan Maynard
    It's absolutely fine where I am in East Anglia, split into IBCs uncovered. It can rot if left in the bark as it's oily and waterproof but split open it drys nice and quick. Once dry won't rot, at least round here. Great firewood to me. Then the bark falls off and I use that for firelighters, much better than paper.
  4. Dan Maynard
    This. SWL is for lifting operations so the safety factor is nice and high. The winch is not rated for lifting - in general if you are dragging and the cable breaks then no disaster, the object just stops moving.
  5. Dan Maynard
    Crazy talk, at least dry it and sell it, if it's open front and back maybe you just stacked it too carefully. A mouse should be able to run all through the stack (apparently). Or burn it yourself, once it dries the mould will go.
  6. Dan Maynard
    When you say metal-sheet sided log store, are there holes in those sides? And are there four sides or is the front open?
  7. Dan Maynard
    I've done that kind of cut into a field where everything was picked up by telehandler and put in a big heap, I was actually surprised by how much I cut in a day. Found a photo below, was cutting back everything hanging out of the hedge on the right but it was overgrown to small trees. This is the pile by lunchtime, just me cutting. I think trouble if there's wire and you plan to chip then you have to sort the wire out and that will slow the whole thing down a hell of a lot. Also, is that a telegraph pole? Trees around the wire or below? Reckon a couple of days if you had a big fire, plus time to burn it of course.
  8. Dan Maynard
    Mine are Youngman, not expensive and the clips between sections are good. Made in UK.
  9. Dan Maynard
    Is the photo real? Really strange, would love to know how that has formed.
  10. Dan Maynard
    I wouldn't have thought of doing that. I guess the difference is that you have some electronics in a new saw that you didn't have in a 3 series. If moisture were to get in that it would be a problem, but then it should all be sealed to stop that.
  11. Dan Maynard
    This is a really really old thread but rates haven't improved hugely. I would suggest getting on the blower and doing some days with local firms if at all possible, you want to find out how you get on before spending all the cash on tickets. As a freelancer the tickets on their own are a bit useless, you need experience too so really the best place to start is in a small crew. If you get on well and stick with it the firm may eventually put you through tickets anyway. Usually February things start to pick up, by the end of March season busy is well underway and people start to get short of workers.
  12. Dan Maynard
    Is that from Chainsawbars? Happen to notice I think the 22 is wrong as it's .325 pitch not 3/8 as that's the size for my 261.
  13. Dan Maynard
    I'm going to helpfully diagnose that there may be a spark issue to cure first....
  14. Dan Maynard
    Take a 5kg log off the stack. Put it in the oven for a day or two, dry it completely and then find it weighs 4kg, so there was 1kg of water. 1kg / 4kg * 100 = 25% dry basis (water compared to dry wood) 1kg / 5kg * 100 = 20% wet basis (water compared to wet log starting out) Or at least that's the way I picture it. How they can have written the law without specifying this baffles me.
  15. Dan Maynard
    @openspaceman is your combustion guru but I would say the stove thermometers are for the flue, not the body of the stove. As Rough Hewn says your fire temperature is 1000+, then there are insulating bricks at the sides because that would distort the steel if in direct contact so the body temperature must be lower. 230 sounds quite reasonable for body temperature to me.
  16. Dan Maynard
    If you've got a crane on site then delays are expensive, maybe it's worth Heras fencing the area? Although it's not that hard to break in, maybe it would need a security firm as well. Would client pay the extra? I guess the extra up front might be easier than charging them again if a second day of crane needed.
  17. Dan Maynard
    I have ground the front face of my 17mm impact socket flat so it sits down nicely to the blade, then use the same socket on impact driver and torque wrench. It's a six sided so like you say drives nicely on the flats.
  18. Dan Maynard
    I've got a couple of soft DMM ones, almost by accident as I wanted more of a bucket but they have turned out to be excellent for exactly the use you describe, I keep my mainline in one inside my big bag. Pitcher Rope Bag 26L | Bags | DMM DMMWALES.COM Browse Pitcher Rope Bag 26L products in Bags. Available to buy online, delivered direct from DMM Wales. They were on special offer at the time.
  19. Dan Maynard
    Sounds like it needs combining with a thermal store so you can heat the store in the evening and have some warm for the rads next morning. My brother has a wood pellet stove and think this is the principle of his installation.
  20. Dan Maynard
    I reckon they left that branch for a swing, not cause they didn't fancy it.
  21. Dan Maynard
    I guess they don't enjoy it but suffer the salt. I think there is probably more salt spray on trees living next to the sea, but less salty water poured on the roots.
  22. Dan Maynard
    In half it'll be fine though, but need two trips.
  23. Dan Maynard
    Yup. There was no forensic or CCTV evidence for the police to look at so they didn't visit, that was it really. Insurance paid but that's two claims in three years so premium bump last time. I had rebuilt the brake and made a few bits to make it work smoothly. Other than that I think new starter string and greenteeth were the only things it ever needed. I'm not grinding all the time but did a reasonable number of stumps, it was a solid machine and I wish it hadn't got nicked.
  24. Dan Maynard
    I'd still say 360. Haven't used the Toro but Carlton is similar, turntable is worth it on the 360.
  25. Dan Maynard
    I went the other way with my Makita, much better for pruning. I am currently running the Panther chain, it has simpler depth gauges which are easier to file than the Stihl ones so I find it a bit easier to sharpen.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept