Jump to content

Log in or register to remove this advert

Ferguson system

Member
 View Profile  See their activity

  • Posts

    295

  • Joined

  • Last visited

 Content Type 

Everything posted by Ferguson system

  1. Ferguson system
    Yes, that is correct.
  2. Ferguson system
    That's the way I built my chipper. I had a Wallenstein pto chipper and got a Lister hr 2 engine for free. We modified the pto shaft and fitted it to the crank on the Lister. (Shear bolt for safety). Mounted it all on an old trailer chassi that has been restored and reinforced. Chipper and engine running at 1500 rpm 1:1 ratio. It is a beast. Blink and the brush is gone
  3. Ferguson system
    Welcome to arbtalk. There's not much that can go wrong on a cs 100. Make sure that the bearings on the drum are ok and regularely greased, drive belts should be checked, the knives needs to be sharpend or changed once in a while. General maintenance on the engine: Oil, oil filter, fuel filter, air filter.
  4. Ferguson system
    This winch has all the features you may need: Igland AS . Radio controll is optional, but recommended. Pullmatic (hydraulic output of rope) is also optional, but handy when working on slopes.
  5. Ferguson system
    Stihl ms 170 with 12" bar, .050.
  6. Ferguson system
    He needs a bigger load
  7. Ferguson system
    Zubat 240 and sugoi 360.
  8. Ferguson system
    Yes, always.
  9. Ferguson system
  10. Ferguson system
    Jøtul is glowing red. Frost this morning.
  11. Ferguson system
    Sharp knives help alot. Adding rubber paddles on the disc will make it throw the woodchip further.
  12. Ferguson system
    It must be Metsaman's Norwegian brother.
  13. Ferguson system
    It's powered by the tractors hydraulic system. A separate hydraulic system can be added with a hydpump ran by the pto.
  14. Ferguson system
    Igland WS 90
  15. Ferguson system
    Hakki pilke eagle
  16. Ferguson system
    Stihl 170/180
  17. Ferguson system
    I've got a 16" bar on my Jonsered 2172, 8 pin sprocket. Limbing is fun with it
  18. Ferguson system
    A tractor with a double drum igland winch will solve your problem.
  19. Ferguson system
    We do, but not to the same extent as you have in the UK. Hollow oaks are preserved, historically important trees, and calcareous lime forests.
  20. Ferguson system
    I guess you could call it a dead centre.
  21. Ferguson system
    Yup, most likely.
  22. Ferguson system
    I was asked by the local church council to take a look at these ash trees. Ø. 1.3m and 20 m tall. They want them removed by the end of next year.
  23. Ferguson system
    Prime with owatrol oil (anti rust), topped with two layers of enamel paint that has a little bit of owatrol oil mixed in it. End result: glossy, hard-wearing surface that is rust resistent.
  24. Ferguson system
    I use 12" bars on Stihl 170, 020t and 200t. I'm awaiting a batch of custom-made 12" Iggesund bars, that will replace the original Stihl Rollomatic.
  25. Ferguson system
    I recently bought a Husky hedge trimmer (same model as in the first picture) and it has been superb so far. Starts easy, razor sharp and very well balanced.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.