Jump to content

Log in or register to remove this advert

peatff

Veteran Member
  • Posts

    5,870
  • Joined

  • Last visited

Everything posted by peatff

  1. To get the clutch undone to get to the needle bearing? I think that was his primary objective.
  2. And at the end of the Tai Chi if you pause the video the chain is back to front as well
  3. I wouldn't bother too much about the L screw if it ticks over alright. Richen the H up a bit if it worries you.
  4. He's hacked Shane's account at least
  5. Don't worry about yours, they only seem to fake the big 3 series saws.
  6. I'll name it a ratchet winch. A friend of mine had a recovery wagon and had all kind of contraptions at his yard and some of it was like this.
  7. It wasn't George Washington was it ?
  8. He landed on a ladder and had to go back to the start
  9. They've used chainsaws a couple of times, once in the studio to cut up the cool wall looked like an Echo and in Bolivia to build a bridge, something like an 08S. [ame= ] [/ame]
  10. peatff

    Tree ID?

    Dead.
  11. I wonder if they take turns in the barrel ?
  12. peatff

    Stihl 034

    I've got an early 036 with no decompress looks like the same saw. If you just want it to look nice paint the metal bits. Mine is on an 18" bar.
  13. He sends letters out purporting to be a Nigerian prince occasionally as well Allegedly !
  14. This is probably something to look at, it is confusing. If you add it to your basket it says it is supplied by Rye oils. [ame=http://www.amazon.co.uk/OREGON-BIO-CHAIN-OIL-25LTR/dp/B00NNUDSEO/ref=sr_1_14?s=diy&ie=UTF8&qid=1424768784&sr=1-14&keywords=oregon+chain+oil]OREGON BIO CHAIN OIL 25LTR: Amazon.co.uk: DIY & Tools@@AMEPARAM@@http://ecx.images-amazon.com/images/I/31gXsJbUlnL.@@AMEPARAM@@31gXsJbUlnL[/ame]
  15. Your Christmas lasts a lot longer than ours I've got some oak on the pile and it burns alright if you split it smaller, it doesn't flame much though.
  16. The Chinese Husqvarna copies are too orange and the dark parts are black instead of the grey that Husqvarna uses. Also the filler caps are wrong and the choke is a button you pull out instead of a lever and the stop switch is a toggle.
  17. I've not seen a diaphragm go like that, good idea to countersink the holes.
  18. Keep an eye out for my friend's mate Muff, he has a gite not far from there and likes to go to the harbour and eat his jambon fromage baguette, little bloke with grey hair usually wearing light brown Farrahs I just reported my message and noticed Jonny was banned. I hope it doesn't ruin my chances of getting rich by sitting in front of my computer it'd suit me to the ground in this cold weather.
  19. If it's been running on it's side like that the engine will be knackered, I'm out
  20. I hope you sent them back and complained, you could nearly buy a cow for £80 up here It's rained and snowed all day here and more of the same tomorrow according to the forecast.
  21. Will only licensed mechanics be allowed to service the saws ? Any old Tom, Dick or Ronny can mend their own car, let's stop them at that. I'd better surrender my 036 me being a home user, can I still use my 135 ?
  22. There's a little button on the video where you can turn the sound down or mute it completely if you don't like it
  23. It sounds like the hardest part of the job is taking the silencer off the saw then, don't the workshops have basic maintenance tools like a welder ?
  24. It would be 30 minute job to cut it in two, tack the baffle in place and weld it back together. It would cure the problem till they get your new silencer and if the baffle is an interference fit it's a design fault and it's going to happen again anyway as the heat cycling will guarantee.
  25. Emma Peel, beats orange peel

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.