Stubby
-
Posts
31,249 -
Joined
-
Last visited
-
Days Won
114
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by Stubby
-
I seem to remember one about the " fuzziwazzies " ? .......
-
The sets are all in the chalk here on the South Downs . There are heaps of chalk with some flints in it and the tunnels go every which way .
-
Looks more like a Dandelion to me ........
-
They ( foxes and badgers ) have been known share an earth / set . Have a look in a rough circle about 15 to 20 feet around the holes . If its badgers they usually poo around there .
-
Nope . You need to change the nylon oiler gear as well .
-
Go to the doctor .
-
An air leak could come from a split fuel hose or shot crank seals or a split carb boot etc etc . If it has one it will run lean which , will make it over rev and run hot and possibly eventually lean seize . You can check the RPM with a tacho . Obviously you need to know what the top limit RPM is supposed to be . .
-
Is it over revving ? it may be running a bit lean for whatever reason ( air leak , carb out of adjustment ) this would make it get hotter than it should , might even nip up .
-
Equally no wind and pissing down all week makes them wet again . Weird innit ?
-
Yeas . Of course . Then the distance from dome to base and position of the ports would all be controlled accurately .
-
You would have to do a tool change from a flat endmill to a ball nosed cutter .
-
Steve has one . ( Mr Bullman )
-
And then it would cost more . Another CNC machining opp and tooling to hold it .
-
No . I though it was a bit .......eerr I dunno , did not like it .
-
I thought ( wrongly perhaps ) that the squish band was just the area around the periphery ?
-
I have this . Does not sound as though its blowing as hard as a BG86 but is actually blowing harder . ( the wet leaf on the road test )
-
If I click the link it opens up the " Power equipment " page with your post and some pics .
-
I have never needed to change a needle roller in any of my Husqvarna saws , ever . I dont use the chain brake either .
-
Whats a casting artifact ? Could you take it on the antiques road show ?
-
And are you going to make any adjustments ?
-
Don't forget to tell him not to use a Husqvarna strimmer .............
-
I think this part you have stress to both parties ....
-
Ah yes , of course . Like a soap "actor "
-
Not a war then ?
-
Before you do any thing put your post code in to the LA and ask if there are any TPO trees .
