Jump to content

Log in or register to remove this advert

Recommended Posts

Posted

Anyone know how much force is generated on the anchor point from a 250mm fall?

I know there are a lot of factors that come into play like climbers weight, but I’d imagine there have been some tests done, I just can’t find them.

 

 

 

Cheers!

Log in or register to remove this advert

Posted
26 minutes ago, ANK said:

 

Anyone know how much force is generated on the anchor point from a 250mm fall?

I know there are a lot of factors that come into play like climbers weight, but I’d imagine there have been some tests done, I just can’t find them.

 

 

 

Cheers!

 

It depends on how suddenly the falling object is arrested, if there is some flex in the system the force is less than a sudden stop.

 

The terminal velocity from that drop is time=0.5gt^2 so ~0.2 sec  acceleration is gt so about 2m/sev

 

Force on the system =mass times deceleration so the faster the stop the higher the loading

  • Like 1
Posted (edited)

I guess if you jump off a 250mm wall and keep your legs locked you will feel the jolt all the way up your spine.

 

but it c/would be worse if your were to fall  and your harness was to stop you as you fall backwards, so that force you felt up your spine when you jump off locked legs, would be bending your back (wards) even more than it would like to go.😬

Edited by Wonky
Auto correct 🤦‍♂️Banding to bending 🤔
Posted
11 minutes ago, Wonky said:

I guess so. As your not ment to climb that above your anchor point

If your 250mm above your anchor point it would be a 500mm fall, just saying like.

 

the answer is it won’t kill you, may bruise the odd bit but nowt to panic about 🤔

  • Like 5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.