All Activity

Morning all, Feeling tired after yesterday’s efforts in the heat, but job went well. Hedges today.

The obvious is to clean out the bar groove and oil inlet hole . Start the without bar and chain . see if any oil comes out of the out let . Careful how you rev the saw , don't want the clutch spinning off if its a thread on one . The hard to start when hot could be low compression . the 135 is not a pro saw so maybe not worth spending too much money on it .

Wordle 1,516 5/6 ⬛🟨⬛🟨⬛ 🟨⬛🟨🟨🟩 🟨⬛🟩🟨🟩 ⬛🟩🟩⬛🟩 🟩🟩🟩🟩🟩

Morning all . Up late after going to Fratton Park to watch the blues loose 2--1 to Reading in a cup match . To be fair we did not put out a full strength side but then nor did they . They were just better . One of our new signings on the left wing was shit .

Wordle 1,516 5/6 ⬜⬜🟨⬜🟨 ⬜🟩⬜🟩⬜ ⬜🟩⬜🟩⬜ 🟨🟩🟩🟩⬜ 🟩🟩🟩🟩🟩

Up early for no reason! Walk up Golden Cap with the old folk maybe, or just around Landon Wood! Going to be another hot one! Be safe folks! Logger, Rhythm.

Misty Good Morning.

Wordle 1,516 3/6 ⬜🟨🟨⬜⬜ 🟨🟩🟩🟩⬜ 🟩🟩🟩🟩🟩

Wordle 1,516 4/6 ⬜⬜⬜⬜🟨 ⬜🟨🟨⬜⬜ ⬜🟩⬜🟨⬜ 🟩🟩🟩🟩🟩 Happy with that.

Sorry for the late reply. Thanks gents thought it was strange with no sprocket. Will have to get a sprocket bar next time. Don’t think it will take long to wear as generates a lot of heat.

Good morning Arbtalkers 😊

Good Misty Morning again. Restless night again too. Have a steady one. Hump-day and all.

Wordle 1,516 X/6 ⬜⬜⬜🟨⬜ 🟨🟩⬜⬜⬜ ⬜🟩🟨⬜⬜ ⬜🟩⬜⬜🟩 ⬜🟩⬜⬜🟩 🟨🟩⬜⬜🟩

This guy is a time waster/wind up merchant. Do yourselves a favour and ignore him.

First time stating the saw up since about 10 years ago. So dont remember much But it runs well, apart from hard to start hot and there is no oil on the chain what so ever! Yes the oil tank is full. Where do I start look please? Thanks PS 14" Husqvarna 135

So you are happy burning old tyres, but not happy with me occupying waste deralict land

So what will they do if they do indeed find you squatting there land? Do you have reference to this statue please?

I hope it is 50 per hour, requirements like for INTEL CEO😯

Its called squatters rights and possibly later onto adverse possession Someone dose own it, it is just that I (or even the gas works next door) dont know who it is. How do you do a physical search on paper records if the records are in say some ones vault half way round the world on say an offshore desert island and that person may now of passed with out passing down the title deeds to there children

For all those who naively buy into this whole asylum seeker farce. Hope all those poor lads on the front page of the telegraph let all the woman and children on first 🤷‍♂️

Aww, nice one. Such a gentle voice from mr Brooks. A great era for cultivating imagination in kids. You had to be there!

Ask for a tap and die set for your birthday! If you use them gently (oil, fward and back etc) even the cheap ones will work fine to repair stripped threads. Sorry if you have done this but check the manual for the valve clearances and set them to the midpoint. I find setting valves incredibly temperamental and it often requires several attempts. Normally the tolerances are given as a range, ive sometimes fixed issues in used engines going for the tighter end of the range, if that makes sense.

Thanks for your responses guys. I'm really trying to get an idea of how well made this machine is, and how it might handle say, wet conifer/gnarly hawthorn ? I suspect maybe poorly, like our old gravity fed machine, than our timber wolf 150 -but the various machine owners in the Somerset area must know, first-hand.. 🤔 TIA

Looks like a Constable painting.