Gnome

They taste quite nice. I find most highlander crisps are a bit greasy and a bit on the thin side.

I wouldn't consider myself working class. I think the minimum wage has altered things at the bottom of the ladder. I earn around £1000 a month after tax which is probably alot less than many in the so called gutter class.( so i'm in some kind of underclass that has to work hard) I think of the working class now as the public sector workers on decent money with a foreign holiday once or twice a year, 2 cars, pension and home owner(20k plus a year) I don't bother socialising as just can't afford it so for the past 15years or so(my working life)I have been immune to any social climbing. I know of many in the golfing fraternity and a few further up the ladder. I may as well be on a different planet to them. At school I was very clever but knew I did not fit in with the ones going to Uni and with the rest who were smoking round the back of the school. Alot of it is not what you know but who you know but many of you will know that already. My question is: Are there far more steps on the class ladder these days?

Kubota G21 suits me on wet grass, hoovers up the leaves in autumn and compact. Use it all year round. Easy disposal of clippings as well.

Good site mate.

The DBH club. I'm going to loose a stone and a half for the spring time, there i've said it so I have to do it. 12st 10lbs to 11st 3lbs by March 1st 2013. Let you know how I get on. Let's all be positive and keep on track.

:thumbup:Done.

CS30, Woodchipper and Stumpgrinder tickets for me(Certified Achievements!!). Getting stuff ready for the Jubilee Celebrations back in June were also highlights especially building my Jubilee Beacon, which I'm still amazed I managed to put together without seriously damaging myself. Using chainsaws and being paid for it which has been fun.(even if my bar is too long on my 372xp!) Signing up to Arbtalk which sounds very cheesy but has really helped me from getting some good gear to advice on all things arb. As well as keeping me sane. So all in all a good year thanks chaps(eses)Bring on two oh one three.

Agreed, Felco is what I would recommend. These might be worth a look as well if money is an issue: Rolson Tools Or if you want to go all Samurai: Kanenori Loppers - Niwaki Never had a problem with Bahco's pruning equipment and easy to find as they are orange!

Some nice pieces there. Was up at Carrbridge this year. Love that dragonfly.

Oregon 75RD Ripping chain. OREGON brand 72RD, 73RD, 75RD chain saw chain Pain in the neck to sharpen all those cutters so I am hoping to order a grinder off of Rob's site in the new year. I wasn't able to source skip chains but am more than happy with the results with the above mentioned Oregon one. I don't mind being frowned upon from time to time !!!!

Won't bother putting the bins out then.

Some things I've caught myself saying to the young uns They always look confused the first couple of times. It's the old take two steps then turnround and say what? pass me the doofer (any gadget required for task in hand) To the batmobile Roders (Go and stand by trailer at the back of the Ride on) Go get me a knife and fork for this ( Spade and Fork) usually followed by that's a shovel !!! I need a prayer mat (mat for weeding to ease the sare kneecaps) Don't forget the javelin (pinch bar) I used to have a Polish apprentice and was learning a few bits and bobs to make the day easier. Sometimes I come out with a zolte metroovka (not correct spelling) for a yellow tape measure, raises the odd eyebrow. I like giving the wildlife names and said to my apprentice at the time it's your turn to name this little shrew, Louie he replies, Louie Sherew. I gave him a pat on the head. I know my patters pish but keeps me ticking over.

Just ordered some more tickets to take you over the £2500 Steve.

Well I beg to differ as I have milled a number of trees with this configuration. The website which I bought the bar and chain from (not going to advertise as is not one on arbtalk) clearly states the model in there chain/bar table. As I clearly stated it wont compete with an 880 so if doing commercial milling I would opt for the bigger machine. I only use this bar for occasional milling of beech,elm,sycamore,lime and horse chestnut. Cant justify getting an 880 or 3120 for this. It is quite slow but I take it easy and let it rest between runs. As I do this myself out in the woodland where the trees fall I have found it invaluable to extract timber that would be left to rot. So to me it is a versatile saw. The 24" bar runs fine as well. I am thinking of getting an 18" bar for this saw but found that most 18" bars are rated for 60cc or less. If someone can recommend a bar I would appreciate it. Sorry if I have been seen to be plugging "get a 3ft er or else" I'm not. Husqvarna I think state 24" as max for the 372 but milling (in my eyes) is slightly different. Hope that clears it up chaps.

I've found it a joy to use. I run a 24" bar when ringing and blocking out for carving and put the 36" on with a ripping chain for milling which I know maybe much slower than using a 880 but does me. Versatile I thinks they call it these days. Keep your fuel fresh and mind and tweek the oiler depending which bar your putting on. Take it easy for the first few tanks.

When I got my 372xp I had the same problem. especially when I put a 36"er on it.

Depends on how big it is.

Good communication regarding recent order and delivered when stated !! The arbtalk T-shirts are great (good quality Steve). I wish all the guys and gals a merry christmas and will be placing more orders in the new year.

You need to let off steam now and again and if this helps stress levels then that's fine with me. Hate working for people who keep me waiting. He's done you a favour by showing his hand now. It would probably only get worse. If you are worried about him bad mouthing you to friends then again he has done you another favour as they could be of the same mould. You obviously have more patience than me and that has to be commended I'm sure there are alot of us who might have told him where to go alot sooner. Just think of it like you nearly stood in a puddle wearing your favourite socks!! Grasshopper!

Excellent Rooster. Had toyed with the idea of staining mine. I like your proportions too.

Thanks. Just to compound issues i've been spreading salt for the last week and have found a strange numbing of my jaw due to clenched teeth syndrome !!!! On a more serious note I would be interested to know just how much peoples productivity is affected by cold hands/feet. I find that I just get on with it but it's more a mental thing (walking around scunnered all day). Don't know how you climbers manage.

Was going to ask my mate santa for the AC/DC River Plate on blu ray glad I didn't now. They managed to get all the good ones in in that hour. Used to love being in crowds like that as well. God bless BBC 4. Can't be *£$@# with maiden though so I gave that a miss. difference between blackpool and Vegas.

Yeah i've got some sare fingers at the moment. Need to remember me gloves!!!

Just bought a few sets of tickets, good luck everyone and hope plenty is raised for the kids. Very easy way to pay as well. Have my eye on that lid too Mr. Fox !

I really like all of the above and decided to have a go. Found it a wee bit tricky. This one is placed at the reception at my work and have had quite a few requests from visitors. Just a pity I don't have enough time to make more so I will be prepared next year. Lime cut this season 2ft x 1 ft approx. 2 coats of oil. Left it to dry on top of one of our boilers and helped split it a bit to give it a bit more character and a little lighter in the weight department. Thanks again for the inspiration chaps.