Jump to content

Log in or register to remove this advert

woody paul

Veteran Member
  • Posts

    5,445
  • Joined

  • Last visited

Everything posted by woody paul

  1. Read your problem at lunch time, so when use chipper this afternoon, held blue switch in and pushed green and rollers turned as soon as I let green button go they stopped so it maybe blue switch or wires.
  2. woody paul

    Chipper

    Ask them about selling you one.
  3. woody paul

    Chipper

    Must be a hire shop nearby do a timberwolf 13/75.
  4. woody paul

    Chipper

    Were are you based.
  5. April 22nd on the Essex Suffolk border.
  6. Will depend on how it's set up, if it has two stage pump will be as fast as tractor. If I rev my power pack to full revs it's faster then any tractor.
  7. As its in Ireland they probably did, no way they could do him for not strapping them down.
  8. Yes it was still got a pile of mud covered brash to get rid of, moat was only dredged out 3 years ago but stuff was caked in it.
  9. This afternoons job, 3 good lumps of Macrocarpa in a moat that came off in storm. made difficult because behind barn so had to winch it along moat then lift out over new hedge plants.
  10. Pto pump and tank and run it off MF35. I built a power pack a couple of years ago to free up tractor and to use on site yo save taking tractor, but it's a bit of a monster,
  11. I am guessing his on about plastic ones, not metal.
  12. Check that there is no obstruction in return pipe off injector line have know blocked pipe to cause pressure in pump and blowing gaskets.
  13. When I was looking at chippers last year looked at the spec of TP chippers, the petrol 175 runs 38hp and uses 6l/h the diesel is 24hp and uses 3l/h. But the surprise was the 215 which runs 59hp diesel and uses 3l/h.which is a lot more chipping using less fuel.
  14. The ones I use are 5litre get them from local Ernest doe branch but I but most agriculture dealer has them. Not petrol tight.
  15. Got these jugs for oil and diesel, Lids keep them clean.
  16. Looks good, know how it is with doing things, when I cut tendon in thumb, even getting a glass of water turn tap with good hand then pick up glass and fill then put glass down and turn tap off. Don't over do it and mess up repair. Messed up tattoo a bit.
  17. Lost movement in right arm 10 years ago, and was told by a private Physio that first looked and did test that I had detached 3 of the 4 rotator cuff muscles, then saw doctor how said yes then refer to see consultant how said yes that's what you have done went back to see physio to get some movement back while waiting for MRI and she had taken my notes to a practice she worked at to get second opinion on which turned out to be 4 opinions as they looked at my notes over cups of tea. Kept doing what physio told me and managed to do some light work which amazed her and doctor. Got MRI scan after a long wait and xrays on eyes and head for metal fragments then saw consultant again after about 2 months how said no you haven't rotator cuff damage you have impingement in shoulder and can't operate for were it is would do to much damage getting to it. Still plays up from time to time pain can be like someone standing on shoulder.
  18. The loader is a Tobroco giant 204 so yes can tow timberwolf 150.
  19. Have been thinking of making a chip bin to put on my little loader to get chips out of garden, would probably be less trips back and forth then grabbing brash and carrying it to chipper.
  20. Sounds like you need to have an MRI to find out more than an X Ray shows.
  21. There's a lot of people back tracking on what you said about red diesel last year.
  22. That's why I never both now, couple of years ago was the last time I went.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.