Jump to content

Log in or register to remove this advert

woody paul

Veteran Member
  • Posts

    5,752
  • Joined

  • Last visited

Everything posted by woody paul

  1. As post is out of ground and not needed, the quickest way is cut through post above and below to make a log and split it out. Or how you did it if post is needed.
  2. What,,, me little loader will run for 20 hours on that much fuel.
  3. Haha they lasted another 10 months.
  4. Are you sure the battery is the problem, not the starter or ignition short.
  5. Just had time to have a good look at there grab and compare they must have some steel in them as only 4 tines and come in heavier then intermecato one of the same size digger also opens up bigger.
  6. No way they are standing up there, it would be a little windy up there.
  7. Has it stood out in the rain, I know someone how's tractor did the same turned out to be rain getting in or on battery and messing it up.
  8. Would not use it to grub out, take it will be better picking up small stuff.
  9. Had another quote £1695 for a TG12UG7 and was told the TG12SR5 is not standard in this country but could be ordered in. Is not a bad price look at some on ebay which may bend easy.
  10. Just move tractor and splitter nearer.. You will only need a atv winch if dragging small stuff, but you will need something quick so compair line speed. Demountable winches use anderson plugs.
  11. Yes plus pipes. That was from Hywel Evans.
  12. Got a quote for a fixed Intermecato TG12UG7 £1750+vat
  13. I use a free swing grab on loader which is OK but would need fixed on digger on be able to grab vertical stuff.
  14. His on the other side of the Vale to me.
  15. Had a bit of a look for the TG12SR5 is it still available.
  16. Can see why you need the right geometry as with small digger you need to pick stuff up close. The only way to get this right is make it your self.
  17. That's down to bad operator.
  18. You have upset one of the lads and now they are taking the piss, would point out to their boss it's not you it's them. Were ever there next job is I would make a point of just dropping by and see how they work but to make sure they don't see you, not pleasant but if that's what has to be done to save your neck then be it.
  19. More like pyracantha which is no better than black thorn to deal with.
  20. Will be on 1.5t, moving brash and feeding chipper but would be nice to turn it to remove hedge coppice brash.
  21. Got a RSL grab on Giant loader it's about the same weight as that. I am sure I have seen one that turns with the removal of pin.
  22. Have looked at JB, but haven't got quick hitch and weight is the main thing I am worried about
  23. Maybe after a grab for 1.5T digger, is there a grab on the market that you can turn 90deg by just pulling pin like the Klou one.
  24. Would think its a brave person feed it by hand.
  25. Would be interest to know what timber went for, if it was to be milled then value left on site.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.