Breezeblock
-
Posts
2,312 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by Breezeblock
-
how was the hydraulic pto done was it a diverter valve that just brings in the flow from all the pumps does this machine have a 2 or 3 section hyd pump looks a good job, slot in extensions for the table would be ideal for this
-
is the Honda engine on 50 hr intervals as well
-
ours was as flat as a fart to start with a few tanks of petrol and it'll be as right as rain they are good bits of kit if you don't like it send it up here and I will give you £20
-
long ramps and it will go pretty easy 1 person its a bit of a handful on anything other than flat ground
-
The first day that we had ours I had it on its ribs 5 times 1 of those times it was a mine shaft that was covered with a sheet of ply
-
I've got the Thor magic 13ton petrol powered version and I am pretty impressed with it very fast splitter I find if you run it at full throttle its too fast its quite a complicated design on the valve block and controls but it works very well if you do buy it get somebody to make up the extension table as its £500 quid on its own
-
yep rich t are crap my wife loves them I think they are tasteless
-
blue ribands are the worst polystyrene with photocopied chocolate yuk
-
thats a different way of doing it
-
if it does go Pete tong they are a pleasure to strip and chip and the firewoods usually pretty good
-
depends what your definition of seasoned is it could have lay a year in 3ft of water
-
bio oil still stains driveways
-
usually 25.4 buy a loncin 16hp they are a direct replacement for the gx390 and 1/3 of the price
-
washing powder or tfr should work then jetwash
-
aah buckfast the choice drink for bigoted knuckle dragging bellends
-
don't be so hungry for cash either turn down work or employ somebody with half a brain to not wreck your gear good luck
-
66 degrees is well within safe working limits
-
just the one:thumbup:
-
i sense he was less than happy with the constructive mocking/criticism he got
-
its a pity they couldn't do something with conifer chip we would be rich i tell you rich
-
when we done line boring with a hydraulic borer we made up a steel pipe in a loop and stuck it in a barrel of water it done well at cooling it down and it was simple and cheap
-
have a look on ebay for a terex mbr 71 roller they have a neat little oil cooler for the aux hydraulics the fan might be a bit more difficult to get you would need a motor that would use the return flow from the valve block
-
stefan take it to somebody who knows what they are doing if you are struggling to find somebody take it to loudon at burnside garden machinery in kilsyth
-
could you rig it thru the heated handles:lol:
-
some of these axles have a one shot nut that gets staked in place when its torqued up if you replace the cables get the stainless ones they are only a couple of quid extra
