Jump to content

Log in or register to remove this advert

Craig Johnson

Veteran Member
  • Posts

    1,169
  • Joined

  • Last visited

Everything posted by Craig Johnson

  1. if anchor point failure is the problem throwing another rope at it wont help. most trees only have(when removing) one TIP and the second one, below your feet?,miles over the other side? and when your blocking down a stem?
  2. small like this, runs from the compressor 55 Gallon Single Venturi Static Conductive Drum Vacuums GUARDAIR.COM Powered by compressed air, Guardair 55 Gallon Static Conductive Drum Vacuums are ideal for vacuuming up chips... medium to large WWW.DITCHWITCH.CO.UK xxlarge Vacuum Excavation | Suction Excavation UK Hire | Enviroclean Scotland WWW.EVCSL.COM VACUUM EXCAVATION SERVICES 01355 268 282 Enviro-Clean operate a fleet of RSP ESE Vacuum Excavators...
  3. the digging downs not really a problem, but moving all that soil out will be time consuming unless you have a vacuum extractor, you can get small ones that run off the compressor but i guess your looking at removing 3-4m3
  4. but the boats made with 3 tons of plastic and covered with none recyclable solar panels
  5. need an update on how difficult railtrack are to work with. just been to a regular customers fathers, to look at a Job, surprisingly the council has given permission for a hefty 20% reduction, not really a problem, however the trees are on top of a tall retaining wall next to the tracks, some of the branches extend right across one set of lines. the trains run at every 20-30 minutes. what are going to be some of the requirements from RT?
  6. 5m is usually enough, on jobs that require more its more economical to get a 'plus 5m' insurance policy on top of the 5m rather than 10m
  7. I have had a application knocked back because using google maps/satellite pic does not show an accurate position of the tree in relation to the dwelling and boundary, which has me at a bit of a loos as there's only one tree, which has a big red arrow pointing to it. i have used google before, has anything changed?
  8. friction hitch minding pulley's, petzl P02 on a dog clip, started the ball rolling to make gear specifically for arb
  9. i've got a few pfanners shirts that are well over 12 years old, some of the long slevers are now short, but i agree with steve, there great shirts and great value for money considering how well they last
  10. wykeham mature plant, on the way to scarborough from yours, good selection that you can wander round https://www.wykehammatureplants.co.uk/
  11. i spiked the side of the fuel tank on my 200t, not a big hole more a crack , but enough for it to weep. Any suggestions which glue/product i should use to fix?
  12. if you take its as written, then Every time you go to a new site and tie your climbing kit it needs a thorough examination by a competent person not using it!
  13. As long as you are up to date I can't see how they can have an issue, unless it's just another excuse not to pay
  14. in the loire, they have a 300 year felling cycle on the oak, which has pine and beech planted as cover crop
  15. i know a farmer in leeds who got a massive back dated VAT bill for using a Mog for hauling a 360 around and moving spoil, which in principle is similar
  16. i find taking the rope the opposite way round the tree more stable on small stems. so if (on side D's) you have your friction hitch on the left, pass the rope round the right hand side of the stem, round the back, and then from the left hand side to the right side D. this will give you a cross in front of you getting you closer to the stem and making it more stable without too much loss of mobility, or you could go the whole hog like in the picture
  17. reinventing the wheel and selling it back as something new?
  18. they are wearing really well, had them nearly two years. they are in a different league to sherpas with materials and build
  19. it will be interesting to see what standard it will tested to
  20. http://dealgas-treeconsultancy.co.uk/dealga/wp-content/uploads/2017/03/Cavanagh-Judgment.pdf makes it more interesting if you read this as well
  21. it would have to be a big bar so the chain was going fast ?
  22. who would keep the saw on full revs as it went through your leg
  23. bar length has nothing to do with chain speed.
  24. if its in Harrogate, just walk away the council are a law to themselves and are power mad

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.