Jump to content

Log in or register to remove this advert

Have you used an MS200T one handed


Dean Lofthouse
 Share

Have you use a 200t one handed and should training be provided  

240 members have voted

  1. 1. Have you use a 200t one handed and should training be provided

    • Never, not even once
      9
    • Very rarely
      21
    • Occasionally
      76
    • Every day
      101
    • No Training
      2
    • Yes training should be provided
      31


Recommended Posts

As those of you who have worked with me know, i have my own style of climbing, my own style of cutting, which has slowly developed over years of self taught daily work. i use a wide range of techniques and cuts that are never taught, and probabally never will be, but used with logic and common sence, the risks are minimal.

I have worked with others who have commented that with my confidence and techniques, they struggled to see any H+S risks, or even that 95%+ of my work practices would fail NPTCs.

However, i have worked alongside less experienced climbers who have not the strength or knowledge as myself, who have then jumped straight in at the deep end and tried copying my 'style' to try and keep up with my efficency(not just speed), but without applying common sence or logic, and as a result looked quite frankly dangerous.

 

If there was to be a ticket for cutting and holding, it should be the hardest, longest most intense ticket going, as some people will never have the sence or ability to do it safety.

 

Dear Josh.

 

All that sounded really gay.

 

Regards

 

Mike

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 185
  • Created
  • Last Reply

Top Posters In This Topic

Swiftly moving away from the Gay theme.... :lol:

 

Going back to loading the mewp....if I'm out full stretch and need to cut a branch, I put on two slings, crab them together and cut between, let the branch dangle then slowly take the weight of the branch whilst keeping an eye on the warning lights in the basket. :001_smile:

Link to comment
Share on other sites

Good idea that Dean, I'll log it away. :wink:

 

I don't use slings much, as i tend to chuck small bits by hand or rig larger pieces off with block etc.

 

A rope is handy in the basket if you like using slings. Just fix onto the branch and zip the piece straight to the ground as and when required.

Link to comment
Share on other sites

sometimes using one with one hand is the easiest and safest thing to do. I have no problem using one occasionally with my left hand. I also use mine on the ground quite a bit. A lot of it boils down to experience and common sense, im not promoting its use one handed, but for me, im ok with it.

Link to comment
Share on other sites

Going back to loading the mewp....if I'm out full stretch and need to cut a branch, I put on two slings, crab them together and cut between, let the branch dangle then slowly take the weight of the branch whilst keeping an eye on the warning lights in the basket. :001_smile:

 

i think i have only used a sling once, on my chainsaw in a tree assessment:biggrin:

 

as to loading the mewp, i cant really say what my normal practice is:lol:

Link to comment
Share on other sites

i dont have a ticket for a top handle saw but have just finnished prunning the 1000th apple tree today(started on boxing day) of a little orchard i have to do before i start on a 5000 tree one next month, cut and hold one handed as well as two handed , the thing is i think that you will get more injurie from repetive strain and muscle soreness from useing it one handed, my forarms are like popeye tonight use two hands when possible.

Link to comment
Share on other sites

Swiftly moving away from the Gay theme.... :lol:

 

Going back to loading the mewp....if I'm out full stretch and need to cut a branch, I put on two slings, crab them together and cut between, let the branch dangle then slowly take the weight of the branch whilst keeping an eye on the warning lights in the basket. :001_smile:

 

But surely that must be slowing down with all the time of clipping together slings:001_tt2: only kidding its a dodgy old thing at times potentially overloading them especially with two in the bucket not much room for extra weight on the mewp. I have done a lot of work with the nissan cabstar mewp and i really dont enjoy being at full extension looking down and seeing a little old cabstar

Link to comment
Share on other sites

Hi all I use one it one handed or 2 handed and cut and hold . I do what ever is safest for the job in hand . I did some work for one place and they tried to rule out cut and hold and produced a sling each to each climber and were asked to sign a paper they everyone all looked each other and started to laugh . Climbing is a very individual thing and it should be down to the climber to do it as they feel comftable

Littletree ::thumbup:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.