Today's Posts

Yes that should happen. Now open each screw, one at a time and tell us which one is allowing the air through…. I think that’s ok too. You are blowing into the metering chamber only, so long as you have the little valve and it’s gubbins plus the diaphragm in place. That’s the chamber where fuel is supplied to the jets….. So here you are creating a little bit of pressure on the fuel side of the jets, you are blowing through the main jet and low speed jets in the direction they are supposed to work. The one way valve in the main jet should be open in this direction. With the low speed circuit there is sometimes a little one way valve at the entry to the low speed circuit, which would also be open in this direction. What is not ok is the purge bulb (or you) being able to suck through the main jet one way valve. And it’s not ok, being able to suck through the low speed circuit one way valve if there is one, less of a big deal, but still not good. Worth mentioning, both one way valves are often a little leaky with air, less so with fuel in them. Secondly, if the purge button pops back really slow and fills with air, its likely the fuel filter inside the carb is probably blocked …. bulb can’t suck fuel so it does what it can and sucks air, through the jets. And finally, leaky fuel line (between carb and bulb) or the bulb itself will allow air into bulb, I think this is pretty obvious. But less obvious maybe is that a leak in this area can easily allow air to be sucked into the carb metering chamber when engine is running…. Food for thought.

Just throwing mud back

So the file release just needs his signature now! Larry Summers has now been dragged into the mire along with Reid Hoffman (LinkedIn founder) and apparently JP Morgan Chase 😳 Now DJT is cuddling up to crown Prince Salman of Khashoggi fame to get a few deals done and possibly selling the Saudis some F35 aircraft

Thats what I think yes - speed and torque. The extra friction caused by pulling the chain round the extra 2 inches out and 2 inches on the return. Plus Im sure there are other factors. Heavier chain. Chain tension generally increases with longer bars to keep the chain tight, so more friction on the tip.

Also is the cable routing slack enough to handle going round corners? but not too slack that it catches on things?

I don't believe that it's about assimilation. On the push side it's just the age old pursuit of wealth and power, but happening at an unprecedented speed. On the pull side it's the human love of convenience and novelty. Digital per se isn't the problem. It'd be fine if it was used wisely and altruistically.

Wordle 1,614 5/6 ⬜⬜⬜⬜⬜ ⬜🟨🟨🟨🟨 🟨🟨🟨🟨⬜ ⬜🟩🟨🟩🟩 🟩🟩🟩🟩🟩

Hi im new to this forum so after help. I have been intersted in owning my own wood now for about 10 years. Ideally looking for 3 ish acres in North Lincolnshire for recreational use and fire wood for my home. I have some questions regarding prices, access and regular maintenance. Can anyone provide an indicative price per acre that would be advised. Not the small lots Woodlands co.uk are dealing. Access, if i have vehicle access can i take my motorhome, camper and stay. Are there any costs required to maintain woodland like insurance, fencing etc Any advice on any topic highly appreciated as I look to aquire my own wood.

Wet here and Newark Machinery show on, I got some keyboard stuff on before I go. Be safe on hump day! Tipsy, Diverse.

As mentioned before I reckon, as long as the electric fuel pump is working, that it will be an air leak. Check the fuel lines or replace, fairly cheap job and easy to do.

is this still for sale

Has anybody got a 60inch -72inch bar for a 880 for sale. would also potentially be interested in the full mill. would also be down to rent... got 48inch setup already. got an 880 already. cheers Jimmy

hu-63a, also fitted to the homelite 290 iirc. rebuild kits are available, simple to fit. kit# RK-14HU around £7-8

Damning judgement from an Internet addict with no industry experience.

I worked at John Taylors 12th century Manor. Nice place, he was a twat though.

Mate of mine has just had his hedge laid and is in need of a load of hazel binders to complete the job. Is anyone aware of a supplier of these in the Herefordshire or surrounding area? The hedge length is 63metres. Many thanks, Bob

Exactly that mate, some days gardening, others tree waste

Thai Prawn Crackers. In a league above the ones you get free with the Chinese takeaway. They've got a little chilli kick and not overly sweet.

he says his model has a Teiki carb If the machine looks like this it is probably too old for the Chinese to bother copying the carb

1.2M views · 6.4K reactions | Como que conseguiu fazer isso 🤔🤔🤔🤔 | Zé... WWW.FACEBOOK.COM Como que conseguiu fazer isso 🤔🤔🤔🤔 "the definition of madness is to repeat the same action and expect a different result"

i'm really impressed Josh.

We are looking for an experienced and qualified climber to join our team. We would consider full-time, part- time or sub-contracting to us as a climber. If interested, please call the office 01438 860368. We are based in Hertfordshire. AG Treecare (Andy Gardner).

Rubble logs, like euc.