All Activity

I suppose it depends on what you explorations into the plaster reveals.

I have converted my 261 to narrow kerf, it definitely cuts faster. I haven't done timed cuts or anything but my impression on small stuff up to say 12 or 14" it's as quick as the 400, and a bit lighter so easier to use. Once the wood gets bigger then I think 3/8 chain clears chips better and the 400 would win. Sounds like you should go 261, I think it's well balanced with 16" bar.

Yes there are some surface roots heading towards the house of the cherry tree, but not sure for far they extend. Cracks in the plaster are about 3mm width at the widest points, i might crack away the plaster so see if its in the wall itself. Can you cut back cherry trees to limit their growth or would i need to consider removal?

Many years ago when I reloaded rifle bullets for stalking I used crushed walnuts in a small tumbler to clean and polish the empty cases first.

I never have hired in a chipper but I think there’s a good call to open up and inspect blades when taking delivery. I can see the hire company blaming the hirer in this case? “ it was all checked before you hired it”, what does it say on the hire agreement?

I’d go for the biggest every time, you’ve got the transport sorted so 500kg difference makes no difference. Get the 20.10, in 6 months you and those looking to hire in a platform will want a 23 or 30mt.

My opinion here is worthless, as I'm not standing next to the tree poking at it. That said, it looks fairly healthy to me, that split branch doesn't look like a recent injury (a couple of years at least), and the kind of force needed to split open a branch like that (be it wind, impact of falling branch from above, teenagers bouncing on it etc.) would just shear off the same branch on a tree with dieback. That's not to say it doesn't have dieback now, but it's in the early stages if it does. Again, I'm not under the tree, and I'm happy to be corrected.

Got my 1.5 ton digger from Harry, then a few months later sold him a micro digger. Both deals were easy, I always keep an eye on what he's got advertised 👍 Machine looks like a lot for the money, I'd be interested if I didn't have one already👍

Electricians and plumbers are asking superstar wages so I suppose money upfront can be considered appearance money? Also Circuses want payment upfront🤔

I've made a little progress with the Trust. The person I had been in contact via email came round and we had a chat about the tree. The reserve manager was planning to come too but he got tied up with some escaped cows 🤷‍♂️ Anyway, the conversation was very much focused around Ash dieback disease. And how the trees are assessed. They grade the trees 1-4. 3 or 4 on a boundary would be enough for the trust to apply to remove the tree, but they usually leave 1 or 2. He said the tree didn't look too bad He explained how the TPO means that where the Trust could normally identify trees that they would manage within the reserves, they have had to commission an independent Level 4 Arboriculture Survey (as requested by the local authority) which then needs to be submitted for consent, and can only deliver what is put forward within the survey and subsequently permitted. They are commissioning another Level 4 Arb Survey this summer with a view to planning the next programme of work in the winter and will point out the tree to the surveyor and ask that it is included in the programme, and will extend the offer to look at the trees from my property. However, this would still be dependent on gaining consent to deliver the work from Newark & Sherwood District Council – He has already made contact with the Tree Officer so that they can have an early discussion about the approach and ensure they do not get held back with the work. We also had another branch come down in some recent winds. There was no damage but I think that is only down to luck. I also noticed that one of the branches that hangs at a low angle seems to have split and have a hole all the way through (Video). 20240511_195327.mp4

Hi Im thinking of buying a sawmill and wondered if anyone could advise on what to look for. I have 10 acres of Oak Beech Doug Fur etc. I havent made my mind up on the size as yet but any general feedback would be helpful. It doesnt need to be portable. I have a mini digger on and power on site. Its classed as an agricultural dwelling. Im in Wiltshire if anyone is selling not to far away feel free to let me know. My other question is do I need planning to put a roof and sides over it?

Quote for my post above. Can't edit it in.

The various chaps I've had in over the last 18 months of a new-build house have either been pay on completion or half halfway, half when done (or thereabouts). Roofers, plasterers, chippies etc., bills in 4 figures. Sparky asked for a good chunk early on because he had to order some pricey units, understandable enough. Five figure bill. Plumber, with the biggest bill, didn't ask for a penny until the last toilet seat had been bolted on. So it varies a lot. Edit to add: 1700 for a fella to sand and lacquer this floor. Payment afterwards, he says.

Now this is where porting comes into its own . You get light but not the tad longer to do the same cutting ...

Well then I dunno. I doubt it, but it depends.

ye i meant more odd job trades people , just doing a day or a few days work similar to domestic tree jobs.

Depends, builders have materials, wages on a job that might take weeks/months to complete. By and large we just have to make sure the chippers/trucks and combi cans are full

You did understand correctly. I run mine with a 14" Stihl Light bar, and it's an animal with that on. Haven't put anything bigger on it, that's what the 400 is for. According to Stihl, the 261 will take an 18" bar, and I've seen people with 20" on it. How it runs with something like that on, I don't know, sorry.

is money upfront the norm for trades people?

Hi @Woody24, We are running the theory side of the City and Guilds Level 3 Forestry and Arboriculture in October 2024. Not sure where you are based but our courses run on the Devon/Cornwall Border. You could come along and, following successful submission of your coursework, achieve a City and Guilds Level 3 Certificate in Forestry and Arboriculture doing the following: Unit 305 - Tree Identification and Planting - 14th-15th October Unit 312 - Tree Pests and Diseases - 17th-18th October Unit 314 - Tree Survey and Inspection - 29th-30th October This training also provides a good base towards going on to achieve your Professional Tree Inspection. The cost is £1350 (no vat) Other units available are: Unit 306 - Practical Tree Planting and Aftercare (pre-req unit305) - 16th October Unit 309 - Woodland Management - 31st October - 1st November Get in touch if you would be interested by email [email protected] or 01822 832232 Lynher Training

Generally, people pay. The figures we charge for domestic work are not worth not paying if you know what I mean. If you’re getting an extension done for 20 or more thousand, people can get funny. I’ve been genuinely stiffed just once in 30 odd years.

I disagree It sounds to be like you get knocked back quite a bit,hence this thread

Our Sherpa for sale if anyone is interested.