Jump to content

Log in or register to remove this advert

Mick Dempsey

Veteran Member
  • Posts

    15,540
  • Joined

  • Last visited

  • Days Won

    230

Everything posted by Mick Dempsey

  1. Good question, I've a 98 transit which has never leaked oil from the gbox or rear diff, and has never had the oil changed in either, yet my 130 leaked from every possible place and I had to change the oil from time to time in both diffs and the transfer box and gearbox.
  2. Along with the Vermeer 252,which shares many features, this rg25 "super junior" must be the most widely sold grinder ever. Here's mine on its way to be sold.
  3. For sure, no point playing the rock star, everyone goes home sooner.
  4. Angle iron welded into a frame, plywood added. Added a flap and gas struts when I got the GM.
  5. A climber can stop, and look at stuff on the pretext of planning, never really an excuse for a groundy to stand still!
  6. Agreed, not least because you have to march to the beat of someone else. A climber sets the pace, if he's feeling ornery life on the ground gets ugly.
  7. I always used to race to the top of the tree then come down to start at the bottom (on a dismantle) I'm more likely these days to get to half way, anchor in and deal with lower branches then move further up. Seems easier.
  8. I think you're getting confused, the Rayco rg25 is hydraulically controlled, you lift the head with a lever. Edit, I just googled and they do make a pedestrian 25hp engine. The one you're looking at ttp, is it a pedestrian or hydraulic one?
  9. Is the Dan equip driven by levers? Or do you have to move the head maually? If so that's a big difference in your effort on a days grinding.
  10. The kohler engine never gave me a single moments trouble in all the time I had it. The three wheeled version, which I had, could roll over easily enough but could also get round tight corners once you learn how to move it with the cutter wheel. Check the drive pulleys to the head are not too worn, that'll eat your belts.
  11. Good shout. Rigging more to avoid smashing branches is underrated, I did an oak the other day, one groundy, lowered all the branches myself using stubs until the tip just touched the ground, held them there till the lad was ready to pull it toward the chipper.
  12. Yeah prolly, on the subject...... [ame] [/ame]
  13. Ha, just had a conversation with my banks contact for my "compete professionale" Where she told me her agenda was full, and wanted to schedule a meeting in the middle of the working day to fill out some paperwork. They bloody live for it!!!!
  14. I think doing things once, right first time rather than constantly tooing and froing around the tree exhausting yourself. I'm also less patient with clients, recently I had a small maple reduction, as I started la cliente started ordering me around, pointing and generally holding her head in her hands at the whole thing, I just stopped looking at her, carried on with the reduction and didn't catch her eye till I unclipped with my feet on terra firma.
  15. I'm interested to know how some of you older/more experienced climbers feel you have changed the way you climb compared to when you were young, dumb and full of..... Personally I am a bit more safety conscious (especially since breaking six ribs after a fall) tie in twice more often, less free climbing. Still hurry hurry hurry, but am less shouty to the groundies (I hope!) More self lowering to keep the groundy from getting overloaded. How has age mellowed and changed you? Anything you would tell yourself ten or so years ago that would have helped?
  16. [ame] [/ame] Absolutely worth it, just for the mince pie joke.
  17. Some nice looking saw work there Snedasawrus.
  18. What do you mean by "turntable"
  19. I ran one for over a decade, made me a pile of money, and a lot better than a pedestrian grinder.
  20. I have to congratulate our Scottish members on the phlegmatic way they've accepted the way the team were knocked out of the RWC. Acceptance of the vagaries of referees decisions and the tumbling dice of sporting chance does you credit. Other teams and supporters could learn a bit.

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.