CallumA
-
Posts
330 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Freelancers directory
Everything posted by CallumA
-
8" beams and the drawings are mostly in my head. And worked around what beams I have available. Yeah got the Makita and it's a god send saves so much time.
-
Got going again and the chain MORTISER is a god send.
-
Been so busy with the garden to get going with woodworking. Now the NE dreich and miserable weather are back I may get going again
-
16mm X 53mm, 85mm and 115mm 32mm X 53mm, 85mm and 115mm That is the width and length of the 3 cutting positions and the second figures are for the second position hope that makes sense
-
Will measure tomorrow
-
Makita 7104l always ment to go and see Johnsond but with this Wuflu carry on never managed, so the wife got it for my 50th [emoji106] [emoji106]
-
Forget to attach pictures
-
Try direct plastics if you can get someone to machine it for you I've used oilon rod and sheet for bushes and slides. Easy to machine and self lubricating.
-
WOW it's quick. Arrived today and risked electrocution as it was pissing it down all day
-
Orbital fasteners[emoji106]
-
Take it round to a mates shed[emoji106]
-
Thanks for that ADW[emoji106] [emoji106]
-
Knocked up this a few years ago and it's great for lengths above 8", made of metal which is OK providing you don't try to cut it! A couple of 4x2" at the bottom so when the saw goes through no contact with the frame
-
Does any one know the carb settings for a Husqvarna K760? Cheers
-
It'll make no difference! Which ever is easiest and crack on
-
Is it leaking between sections? If so then it looks like a c top 3 valve and there will be 4 o rings between sections
-
Normally if you speak to the forester there are part loads left all over the place and if you can pick up yourself then crack on. In saying that it's been 5 years since I bought from them so demand may well be up -
Silly question but have you tried the Forestry Commission at Durris or Huntly
-
It's for filling in bark inclusions and between 2 live edges. The wood is 21%
-
A question to all you table makers! Which low odor resin do you use? I need low odor as job will be done in house garage Cheers
-
Don't think I'll get over this year now with all this going on. Stay safe everyone
-
I'll try and find some photos of my set up. But it's basically both heat sources into the Dunsley Neutralizer with a danfoss thermostatic switch clipped on to the top over flow pipe set at the desired radiator pump temperature (mine was 80*C) which then switches on the radiator pump. I was also lucky that I could just run the hot water as a gravity circuit. It was good as the central heating could be worked off timer or water temperature.
-
East Brae
-
Off to UK sector tomorrow 545 check in and 10 or so forms filled in so far
-
Where are you isolating in UK or norway
