Jump to content

Log in or register to remove this advert

SawTroll

Veteran Member
  • Posts

    1,194
  • Joined

  • Last visited

Everything posted by SawTroll

  1. That's the point with keeping a cheap loaner saw - you never know what will happen to a saw that you loan out.....
  2. Yes, it is a bad time of the year to need anything, but considering it is a long discontinued model, it isn't bad at all - really!
  3. The 142 is built by Poulan (as the cheapest Huskys have been for a couple of decades +), but it isn't bad for a cheap "homeowner" class saw. If that is all that is wrong with it, I would fix it - and keep it as a "loaner" saw....
  4. I fail to see the problem - I would have been quite happy with that....
  5. I've had other issues with my 2007 339xp, but never an oiling issue. so I can't help. The saw is a NE one, but neverthless it developed a carb issue and an intake leak - both fixed "on warranty" 3 1/2 years after I bought the saw!
  6. Oregon chain actually is harder than Stihl chain (Rockwell rating comparisons), despite many posts to the contrary on different forums. The misunderstanding likely is a result of the thicker chrome on the Stihl chain, that also makes it impossible to get it as sharp as the Oregon chain....
  7. Very true - the MS261 simply isn't really qualified as a contender in the 50cc class, because of bulk, weight, and most of all the sluggish handling. Trigger responsiveness also is bad on the standard version, but I can't comment on how the new cm version is in that regard.
  8. No, it isn't normal at all - something is wrong! Are you sure the old bars are from 026s, and not 025s?
  9. Depends on what you mean by "newer" - the heated versions of some non-xp saws were just "g", like in 359g and 353g. The heated version of the 266se was 266sg, and the 262s all were xp (xp, xpg or xph), as you said.
  10. They often are, and the transfers usually are way too narrow, compared to the OEM ones - and those often are too narrow as well, just not that bad....
  11. There is, but they are few and far between - and there are lots of scams as well!
  12. Generally, Meteor is the only really decent aftermarket option, as far as I know (and I believe I know).
  13. Both bars obviously are shorter than "called" - but that is the case with all 3/8" lo-pro/picco bars, except the Logosol bars, for the 066/660 etc.
  14. No aftermarket top ends work really well without being ported, as the porting always is sub-standard compared to OEM. That is just the top of the "ice-berg" - it often is much worse.....
  15. They will, no problem.
  16. The porting usually are substandard even on the better aftermarket cylinders, so they need porting work to even perform like a stock OEM one.
  17. They may not be as well suited as pry-bars, but they otherwise seem to be strong enough.....
  18. I had my 560xpg changed to 3/8" before it left the dealer (73LP) - but each to his own! The 15" .325x7 semi chisel setup that is standard is a bad joke, that surely detracts from the performance of the saw.
  19. Sort of, except that Stihl can't use the best "strato" technology, because of patents held by Husky.
  20. Yes, surely!
  21. ...and a little more weight....
  22. I wonder where that "info" is from, as it doesn't add up with anything I have heard or read before.....
  23. That is alway the best way, regardless what bar it is!
  24. How does the combination K095/K041 bar mount work on the 560xp? Any issues with spilling bar oil out of the upper adjuster hole (it has been reported on the 550)?
  25. That depends on what you compare to - and keep in mind that all Sugihara bars are not the SugiHara lights, there are other models!

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.