Jump to content

Log in or register to remove this advert

william127

Veteran Member
 View Profile  See their activity

  • Posts

    1,097

  • Joined

  • Last visited

 Content Type 

Everything posted by william127

  1. william127
    Getting this beast back on the road and finding that the usedgearbox/transfer box is the slicked I have ever had and that it sits at 70 comfortably and a new pipe has made the power steering feather light! merry Christmas to me!
  2. william127
    I can definitely reverse a trailer and I have to disagree! Sometimes there just isn't room...
  3. william127
    I like my 461 so much... that I bought another one I would certainly be interested in trying a 462, but it would have to be far, far better for me to buy one before the 461s are dead. I would also want to wait a couple of years after it comes out to allow any teething troubles to be sorted..
  4. william127
    I have had a couple of 3.0 troopers, brilliant trucks if the recalls have been done and you look after it. If you use bulk bags rather than cubic meter bags I'd have thought you could easily get one in the back of a trooper commercial. This would be handy as it is depressing and eats into the profit having to get out and put away a trailer for 1 bag! I know, because that's what I have to do at the moment. i would keep the trooper, get a 10x5 ifor Williams, ideally tipper, but i have hardly ever done tipped loads so it's not essential in my mind. If the funds and space allow I would also add a cage sided ifor Williams p6e for tight access/ single bag deliveries. My one is my most used log delivery method.
  5. william127
    I'm more than a little jealous as I have had both those and sold them but the hardtop defender I have now is much better for my work and I will get another ifor tipper early next year.
  6. william127
    This looks to be an identical machine but with the highly useful addition of a swivelling spout- I wish mine had that!
  7. william127
    It will chip up to the size it says, but if that was the bulk of your material it would take quite a while to get the jobs done. It should be fine with 5 hours a week but I can't tell you how many weeks for! At that rate I reckon your hours would overtake my hours in a couple of months, but if you look after it you will soon have earned your money back and started making some.
  8. william127
    I have one, can't fault its performance for the cost. Its not the highest quality by a long way but it chips well, the blades are reversible and cheap, it will happily throw chip to the front of a ten foot trailer and 2 of us have easily taken it apart to take it through a house. Theres a little bit about mine in the last couple of pages in the wee chipper thread. its definitely more of a machine for an owner operator than a machine for anyone to be chucking stuff through.
  9. william127
    Unfortunately I am now full till Christmas with a fence that I should have done a month ago but I was badly let down by the manufacturer of the panels- I was told they would ship them within 2 weeks, it's taken 6 its now not going to be easy, enjoyable or most importantly profitable now im not even keen on Christmas, it just makes a pointless deadline to things. Hopefully I'll be able to catch up on some mechanicals over the holidays, I've got 2 Tractors and a Toyota in pieces!
  10. william127
    My main advice would be don't buy a brand new truck- your figures of buying one for 25k means that over the 4 years you have it you will loose more in depreciation than I have in the last 12 by running older vehicles. Let a big company take the hit for the depreciation, you are in the enviable position of being able to bide your time and shop around for a good buy. I would want to spend maybe 6-8k on the vehicle and maybe 2k on converting it to my needs, but I'm sure that others would want to spend 10-15k buying, but that's still a saving! i would also consider buying one that has been a flat bed rather than a tipper, then converting it as it's might well have been treated a bit better!
  11. william127
    Well the boxes are out, was fairly straightforward to do, I've never used the socket UJ so much though! Just got to get them back in now
  12. william127
    Cheers, had a normal mk3 10+ years ago, moved on to defenders but always had a mk3 shaped hole! Probablem was the price, I could never go back to the mk3 as I need 3.5ton towing capacity. Saw this for a reasonable price, had to have it! Even if I had to drive 800 mile in 20 hours to collect it. It's a monster off road and when I get it sorted it will be a be a great second truck.
  13. william127
    I will, this is just my go to forum! cheers
  14. william127
    I can't stand hiring, the money I know my dad has spent on hiring over the last 30 years makes me shudder! which is why I now own a mini chipper, stump grinder, big saws, digger, trailers, quads, whacked plate, etc etc. once you've spent on hiring that money is gone for good! I can get back some of mine when im done with the machine. getting back to the topic, when you own a machine, you find ways of using it. Even if it's for 5 minutes a day, it's making, not costing!
  15. william127
    I will be changing the gearbox and transfer box on my mk3 hilux tipper soon, has anyone else done one? Any particular difficulties? What do you have to remove in the cab to do the job? Roughly how long should it take? Ive done loads of defender boxes, but never on anything else. and a few pictures of it when it worked! Thanks in advance, William
  16. william127
    I'm sure you are completely right about where it was made. If I have a problem with it, I contact my supplier, who deals with the importer, so in theory that's straight forward. In reality the importers have been useless, as apparently the machine is too new for them to have service parts available! Although this has been improved recently and we got what we needed. at the end of the day, I only paid £1200 for it, it works well, parts are becoming easier and it's only a gravity fed push along machine so there's not much to it. With sharpe blades, (reversible and about £40 a set) it makes a very good job of reducing material into a usable product. Would I have it as a frontline machine for a tree team? Of course not! is it a money making/saving tool for me on my own as a landscaper? Definitely
  17. william127
    My little Hyundai chipper got its first service and blade change yesterday morning, then off to work. I had all The chipping done and a nice load of chippings spread within a couple of hours of getting to the job. I really can't fault this machine for what it cost, so much so that I have bought the matching stump grinder
  18. william127
    I cannot stand using a wooden handled splitting tool now I have been using the plastic handled x21 and x27 for a year or two. Apart from a manky old hatchet for roots I only have fiskars axes now. As for their splitting ability, since buying them I have sold both my log splitters, so that must say something! I have used the husqvarna axes and definitely preferred them to wooden axes but nowhere near as. Good as my fiskars. Although the husqvarnas look like they would be better for bashing wedges, if that's important to you.
  19. william127
    I know the feeling! I'm tempted to buy it myself and then sell my one on, I'd probably get £500 for mine even though it's used!
  20. william127
    There's a brand new 461 on gumtree for £500, in Kensington. its nothing to do with me so don't take this as a recommendation, I'm just pointing it out!
  21. william127
    After many years of thinking about it I did my first chainsaw milling this afternoon. I pulled 3 nice sized pieces of ash out the bottom of the field and up into the yard, a bit of experimentation let me Carry them off the floor with the log arch. I built the mill and attached the winch, screwed a timber on top of the log, attached the 461 and... failed to to get any of the log in the mill, it was far too big so I trimmed the side down freehand with my 365, which made the main log small enough and left a ready to use offcut i re attached the guide timber, ran out the winch and started cutting. I wasn't expecting much with such a small(for milling) saw, but it shot down through the log with minimal pressure after about an hour, including lots of stops to look at things and talk to my mate, I had 3 good boards, the piece off the side and the top slab. I'm really pleased
  22. william127
    Yes, that's why I haven't got one!
  23. william127
    No problem whatsoever then! You can either go"round the clock" taking the edges off or I quite like to go straight across the middle so I end up with sections the width of the ring by about 8 inches. When I have a few of these I switch to the x21, one handed and fly through these bits making brilliant, regular logs.If the timber allows, obviously!
  24. william127
    In length or width? Its how long is a piece of string really! I will split any width ring with my x27 and up to 2ft long if the timber allows. The x27 and x21 are so, so much better than any other axes or mauls I've ever had.
  25. william127
    I have a kubota kx36-3, can't fault the model really except it's on the lighter side I think, about 1400kg? ideally I'd have a Takeuchi tb016, don't think anyone has a bad thing to say about them?! volvos this size are nice and I've always liked the yanmars we have hired. Most people say don't get a jcb this size. i suppose a downside of owning a machine is you don't get to try different ones anymore!

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.