Jump to content

Log in or register to remove this advert

Eddy_t

Veteran Member
  • Posts

    4,383
  • Joined

  • Last visited

Everything posted by Eddy_t

  1. Right, found some info, what's hrc54 mean? Sent using Arbtalk Mobile App
  2. 1109 is the stihl part number, for the 090g, but when I rang stihl, they couldn't find any reference to that number, so I'm guessing it's a contra g bar Sent using Arbtalk Mobile App
  3. Undo the screw, then pull it out, husky designed it so you don't need to read the book Sent using Arbtalk Mobile App
  4. Misformed puffball Sent using Arbtalk Mobile App
  5. I'm running the following: 560xp 385xp 090 051 200t 150t Also have an 020av and 357xp in my workshop Sent using Arbtalk Mobile App
  6. Pm sent with both manuals Sent using Arbtalk Mobile App
  7. C&G, cert is permanent Lantra lasts 5 years Sent using Arbtalk Mobile App
  8. Eddy_t

    Trade ins

    My local dealer sells seconds, but I prefer to pick them up before they've been looked at, had me a fair few part ex's for cheap before they reach the shelves Sent using Arbtalk Mobile App
  9. I will when I get it back, but it is a really old bar, the first numbers stamped on it are 1109 (wyk will understand those numbers) but it's stamped with c43 on the other side if that means anything? Sent using Arbtalk Mobile App
  10. I was told he couldn't do the oil holes though, they apparently need drilling with some special bits? Sent using Arbtalk Mobile App
  11. It's being plasma cut, he doesn't have a spark eroder I don't think Sent using Arbtalk Mobile App
  12. It's what the engineer trying to drill it said Sent using Arbtalk Mobile App
  13. 150t, 200t, 560xp, 090 Sent using Arbtalk Mobile App
  14. I tried drilling it, it ate my drill bits, a diamond dremel bit and a few other drilling tools Sent using Arbtalk Mobile App
  15. It's a bloody old guide bar, but it's made for a geared version of my saw, so the holes are in the wrong place Said guide bar on my saw Sent using Arbtalk Mobile App
  16. I am unfortunately aware now of how hard D2 is, apparently it gets even harder if you try and drill it with normal drills too! Although I was told cobalt drill bits would work Sent using Arbtalk Mobile App
  17. Eddy_t

    """spud""

    I have a link for the 076 service manual if you want it Sent using Arbtalk Mobile App
  18. Pm sent Sent using Arbtalk Mobile App
  19. I assume you have paypal? If so, just post it and I'll send you the money Sent using Arbtalk Mobile App
  20. many a phone call to stihl has left me scratching my head on why I told them more about the machine than they knew! So much for technical department... Sent using Arbtalk Mobile App
  21. It's a game the whole family can enjoy! Sent using Arbtalk Mobile App
  22. Yes, sure mate, I can cut it down, just let me know a price Sent using Arbtalk Mobile App
  23. You know I do, and your mother Sent using Arbtalk Mobile App
  24. I've just sent him a load of abusive texts for you Sent using Arbtalk Mobile App
  25. It's hardened D2 steel I'm actually having it done with a plasma cutter?! Then that's the 090 done, onto the 051, don't suppose you have any inch dia ally bar rolling around? Only need 2 inches... Sent using Arbtalk Mobile App

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.